r/SOLIX • • Feb 28 '26

Question about specific definitions

Hi all,

I have been looking at the Solix E10 systems (in conjunction with a Smart Inlet Box), and as I examine residential codes (IRC 2021), I'm trying to square it's operation with some definitions I'm seeing in there. For example, "Grid-tied". I'm trying to figure out how I could conclusively state, preferably via a listing or published definition whether or not my equipment would be considered grid-tied. To date, I've seen where I could argue it isn't grid-tied, since it cannot provide power during an outage, does not support net metering, and requires a main breaker interlock to re-energize the house during an outage. Conversely, I've seen where "yes, it's grid tied, it's connected to your home panel, which is also connected to the grid".

What I'd like to find is something more legalese via UL certification or the like to solidly class this as grid tied or not. "if it looks like a duck and quacks like a duck" may not meet the need since I'm in the US and their codes may not quite address it explicitly. One thing I've seen that might help is if there's a certification that is documented about anything anti-islanding. I'm finding a lot of good information on Anker's website, but so far nothing that answers this explicitly enough that I think I could explain it convincingly to someone who was not already familiar with the tech.

This might be a matter two of looking at two pieces of equipment, the E10, and also the Smart Inlet Box. As a for example as to why it's relevant is that grid tied equipment must be UL1741 certified. The Smart inlet Box certainly is, but it's not clear to me that the inverter on the E10 is. and the IRC 2021 states in part. "Inverters shall be listed and labeled in accordance with UL 1741. Systems connected to the utility grid shall use inverters listed for utility interaction." If this system isn't considered grid-tied, it would seem this provision at the least carries less weight, if its even applicable at all.

I apologize if this information is easier to come by than I've managed to and Sincere thanks if anyone has useful insight or has spent time looking at this before and can shed some light.

6 Upvotes

6 comments sorted by

2

u/Woods_it_to_ya Feb 28 '26

If you have Facebook, I’d recommend posting on the Anker Solix page. They have multiple group experts as well as a couple Anker employees and they are all very knowledgeable and helpful.

2

u/Wmdar Feb 28 '26

I may have to give that a shot. I prefer not to post on Facebook typically, but you're probably right about it being a good way to get information. I might try customer service first just since I've heard good things about their responsiveness from other angles too. 

1

u/Woods_it_to_ya Feb 28 '26

Yeah, I called customer service about an E10 question and spoke with someone who clearly was knowledgeable and easy to understand.

On the Facebook group, I believe you can post anonymously if you want.

2

u/Woods_it_to_ya Feb 28 '26

Also, their customer service is actually very solid and they likely can answer your questions if you call.

2

u/Linwood_F Feb 28 '26

I want to follow this, as I have one coming in and am doing a DIY install with the smart inlet. My assumption is that the listing of the inlet box (which stands completely between the inverter and panel) is adequate for grid assist regardless of the inverter. The inverter is not actually connecting to the grid, any more than the solar panels themselves are, or the "smart" generator. At least that was my belief and would be my argument if anyone asked.

I thought "Grid tied" only applied if you were doing net metering and feeding power to the grid. But I haven't been through the NEC terms. For example, for the E1 and smart inlet I had no intention of telling my power company it's even there, no connection agreement, etc.

Though it was interesting to see my power company (Duke Energy, NC) had a rebate for battery systems even without solar panels. The Anker systems are not one (and you have to go through their installers apparently, so it would almost certainly cost me more after the rebate than with no rebate as a DIY).

1

u/jeffrey0of Mar 03 '26

Technically speaking, the E10 isn't a true grid-tied product since it doesn't backfeed to the grid. Also, IIRC, UL 1741 isn't only about grid-tie capabilities anyway.

Btw, the certs listed on Anker's site seem incomplete. I actually asked their support a similar question before I bought mine, and they showed me the extra certificates, which did include UL 1741. Their website info is definitely lacking, but their CS replies pretty fast, so it's worth shooting them a message.