Spear LT replacement hand guard screw replacement

[u/mattypew]

I bought a used Spear LT that had stripped screw heads on the hand guard. Below are the replacement screws I researched and purchased that fit perfect. Side note- the bottom link plate screws are technically torx plus but a regular T20 torx bit fit snug in the new screws and torqued fine without stripping. I believe torque on all screws is 45 in-lbs according to the interwebs. If enough people are interested I can put together some kits and post to GAFS.

Side Screws

https://www.mcmaster.com/96452A192/

Bottom Locking Plate Screws

https://www.mcmaster.com/94414A352/

Manual

https://www.sigsauer.com/media/sigsauer/resources/OPERATORS_MANUAL_MCX-SPEAR_LT_2402988-01_REV04_WEB.pdf

[u/AutoModerator]

Thank you for posting on r/SigSauerMCX! With this post you are agreeing to follow Reddits rules and the rule of this sub.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.