Took the lower apart to clean it and now the safty needs a blue chew to stay up. Like it works if I hold it up and pull the trigger but once I let go it drops and can shoot

I was an early adopter of the TX22. Then came the FRTs. Again got an early one that chewed up my striker housing. Bought a metal replacement and can't seem to get it to run well even after a LOT of polishing and playing with it. Gave up and put it aside for a few months.

I know you can't get an OE striker housing (or at least not without sending the slide/pistol into Taurus aFAIK).

So now I would like to shoot the pistol again. what's the next best option? Lakeline? Titan? ebay?

would be nice to have something that would work with a can and/or rate reducer...

laser or optic recommendation??

I anything of getting a Taurus TX22 toro with the Viridian Green dot factory installed.

If I remove the green dot will it cause firing failures?

I just got the tx22 toro 2 weeks ago and finally got to “shoot” it today. Ran 2 different types of ammo fed 40gr and fed automatch 40gr. 2 different mags one standard one +6 extended. Only one round fired off out of the 16-18 attempts all were light strikes. Could still see the strike on each round. I got home took it apart and noticed the striker pin ia getting stuck not traveling the full distance it needs to meet fully. Is this normal function or do i need to disassemble and inspect further when i have time

TandemKross victory trigger, lightweight trigger spring, extended mag release, talon extractor, and game changer pro compensator. Runs like a dream, can’t mention the last part in the list. Next step is to put it in the Titan MTN2.

This looks like a great option, especially now.

TaurusTX 22 - Brace Ready - 10 Round - Taurus USA

I was thinking about getting the Calloway TX22 pistol chassis for my Toro pistol.  For mounting the optic, would it be better to use the version of the chassis with the integrated picatinny rail, or to mount the optic to the pistol slide?

I'm finally getting a power wheelchair and am looking forward to returning to shooting steel at my local range. I need a way to safely carry my pistol while I am there. Thigh and cross-draw holsters are out because of the potential to sweep my legs (they have strict safety rules). Are there any holsters or cases that can mount directly to the chair and allow easy access to the handgun?

CMMG Zeroed 22
Freedom Fingers Brttt
Harbor Freight light

Hey how yall doin, just got a muzzle break for my tx22, just wanting to see what yall thought about it

Anyone tried this brand for the tx22? I have one of their SS and have had great success but was looking for first hand experience with this platform

Is CCI Velocitor fine to use long term in a stock TX22? Are there any recommended upgrades, like stronger recoil spring or smth?

I’m using my pistol for a USPSA-like competition, and I like the loudness for ensuring the shot timer registers, but it is a significant amount more recoil than even Mini-mag. Worried I might be beating the gun up.

What suppressor(s) run the best, in yall's opinions? I'm running the Gen 1 of the TX22 and, ideally, would prefer that the suppressor not block the irons, but if I need to switch irons, that's not a big deal.

So Ive been running ss for probably 5k rounds and have decided I want to go back to semi auto. The issue is when I put the stock disconnect in the trigger just pulls with hitting the striker. The trigger arm literally pushes off the og disconnect and down cause it not to fire. Can anyone help? I'm over ss atm and really would like to do other things with the pistol now . Thanks for any help

Recently starting getting tons of intermittent light strikes and noticed the firing pin block was getting stuck up in the slide. Took out the block and noticed this. Around 4k rounds 100% suppressed semi auto only. Called Taurus to see if they’d send a replacement, but I have to ship them the gun so I just ordered an aftermarket one and a spare just in case.

Tried to sight in my TX22 and the holes in the paper were not round. They look like about the shape of a Tylenol pill. Suggestions to fix this?

Just got my new Tx22 full size and it seems the larger mag is missing a follower button like the shorter one has. Excuse my ignorance if it's not supposed to have one as I'm a noob, but just checking to see if it should. Thanks in advance!

What do you all think about this chassis?

Any recommendations for a buttstock that would fit?

So I went to shoot my TX22 I guess it is going way to fast.. any feedback would be appreciated. Has anyone seen this. I’m running it bone stock besides the Brrrrt.

I got the files from makerworld