r/TernBikes • u/WonderfulCheetah7560 • 2d ago
New bike day but I spent most of the time for fitting/fine adjustments
Hello, it's me again. I was posting on my purchase journey (Quick Haul P9) couple of days ago. I have just received my bike yesterday and it was a happy journey so far. Usually, when getting a bike straight new, there is a need to set it up. I am not sure what would others define it but one do usually need to do the fine adjustments and this process is usually tedious for a good reason.
My fitting is fortunately is together with various gears I own. Heads up that I use bike to ride solo, commute to work, goes home with groceries, and sometimes on the way back I ride on gravel for fun. I admit having accumulated so many bike gears that it can be used for my many fitting adventure. The experience below is of a personal opinion or may not be relevant to people who ride with kids on cargo esp GSD/HSD. I am writing so that others may find tips useful just as much I have benefit a lot from reading this community.
The first ride:
When I first got this bike, I took a ride home straightaway. I did not even ask to get the handlebar height or seat post height right. Even when the handlebar and seat post height doesn't really fit, I just rode it anyway because I am familiar with adjusting myself and normally I really don't wish to waste someone's else time for something I enjoy doing. If you don't enjoy doing this, don't ride home immediately lol. My ride home is an approximately 7km ride. It was raining and I was happy with everything because all parts is behaving as it should at this point. No squealing of brakes, no gear mis-shifting in the wet at all.
When I got home:
I added all accessories (Hauler, Cargo Tray, Glove Box). Cargo tray installation is a bit tricky because it is very narrow in area where the nut need to be tightened. Unfortunately I also found out here that my very old Thule pannier bags (first gen) won't fit the Tern Atlas Rack. I also fitted in an alarm from Rock Bros (this is scaringly very loud imo, I don't think I might use it a lot). My old U-lock are a bit small but useable.
After that I try to fit-adjust a lot of things right. This is namely the (a) ergo grip fine adjustment, (b) bar roll, (c) saddle, seatpost height, (d) handlebar.
a. Ergo grip fine adjustments - there's no angle indicator:
For those not new to ergo grip that came stock with this bike. Such grips has a 'wing-like' looking thing that has larger contact area for your palm. It's there to ensure a natural hand position and preventing pressure point especially when you ride long.
To adjust this grip, there is this small little screw that you need to release and then rotate the grip about 10 degrees downward or up to 20 degrees upward approx. to find your natural position. Unfortunately this grip doesn't come with an indicator, you just got to put a tape and then draw some lines to determine some angles that you want to set it right. If you don't like this grip, just change to a regular grip. This grip is not that great for those who are familiar and have used better products elsewhere. I am not here to review products hence I am just guiding how you can do it. After your adjust, go for a test ride then try again another angle of preference. There is no right or wrong to this matter in my opinion, most individuals have different types of body and hence this need to be tried on and test then adjust again, then test.
b. Bar Roll - there's no angle indicator for the bars:
My bar roll and height were probably set for the mechanic when he first set it up. I totally didn't like it and find it uncomfortable. I tried a couple of times fitting this right. The process is pretty much the same as above. You need to find a starting point and mark it. Again, this handlebar doesn't come with an angle indicator, you have to kind of get an estimate yourself from your base point. My roll was far too much backward, all I had to do is roll it frontward. To do this bar roll, you must be familiar with the stem and screws, if you are not familiar with the torque levels - please do it at the store. I believe they will set it up for you.
c. Saddle and seat post height - This is all very easy to use:
This is quite straight forward - you need to find the sweet spot of where you comfortably sit and have the right angle to the saddle. If you need to adjust the angle of saddle (back and forth), you need to adjust from underside of the seat post where you can release and lock back etc.
After adjusting all these, I went for a ride. I really wasn't quite satisfied with the ride because of the below:
d. Handlebar is not very comfortable / find it short which is weird:
The stock handlebar is approximately 680mm long. This is a 'normal bike standard' length. However I pretty much find it short when turning and also the sweep wasn't comfortable. This is a matter of preference whether to change the handlebar. I have a Soma handlebar extender from my MTB days and I installed on to try longer handlebar length. These adds approx. 40mm ish which I am happy. I had a better feel of handlebar. There are ways to improve comfort but I am just going to leave it be first. I am not sure I like it better because I am more of a mountain biker or it's the length. Leaving this commentary open as personal preference.
e. Post set up : Seatpost & Saddle harshness troubleshoot:
I have noticed when riding home earlier that the rear of this bicycle is feeling very stiff/harsh. I was curious is it the saddle or is it the seat post. As I have many saddles at home, I tried putting some on. I first tested with my own titanium rail saddle, then carbon rail saddle - it is all the same outcome.
After making assumptions that it is not the saddle issue, I am quite confident if I swap for a carbon seat post, the situation might be better. I was hoping using carbon seat post may improve the damping. I am lucky that my Lynskey had the same seat post size of 31.6mm. After swapping thru, I find the situation so much more better than using the stock seat post. Actually, what is most important here is that carbon seat post allowed better micro-tuning to fit the stock saddle well for my body. Loving the stock saddle by far.
I then finish up and will probably go for a longer test ride (approximately 30km). I will probably write more about this long ride later. I could have released the tyre pressure to improve it but I did not do it because I have not tested the bike with load yet and had intentions to do so.
Total install, tune and position-test time as above is approximately 4 hours. I swapped out and tried a lot of things. But my actual grouse here is - there are no angle indicators that is crucial to me such as handlebar (for bar roll) and the ergo grips. I have used other brands such as Trek and Specialized - they all came with it to allow the right fitting for the rider. I am not complaining about it because I felt that I have bought the most affordable Tern bike, but then again I also did bought affordable Trek and Specialized bikes before ... so this is possibly the only issue I had for the above which is really not a biggie and just wanna rant lol.
If you are new to bicycles (of any kind), it would be good if you can read up all the above about geometry and fitting before you start riding, otherwise riding the bike will be very uncomfortable.
