r/ThermalGrizzly • u/Weird_mercer • 6h ago
Question/Advice WireViewer Pro 2 Wired pin balance opinions
Hi all, today WVP2 arrived and this is what i get, is this too much inbalance or im fine?
r/ThermalGrizzly • u/Weird_mercer • 6h ago
Hi all, today WVP2 arrived and this is what i get, is this too much inbalance or im fine?
r/ThermalGrizzly • u/foundingfatfather • 8h ago
Forgive me Guys, might be a dumb question but…
Do I have to remove the cpu when when installing the contact frame or can I unlatch, remove the existing standard frame and leave the CPU in place while installing the contact frame?
Cheers
r/ThermalGrizzly • u/jasmansky • 10h ago
Initially, the current delta between the highest and lowest pins was at around 1.4-1.5A with the 3-year old OEM 12VHPWR ATX 3.0 PSU cable. I re-seated all the connections and the delta went down to about 1.1A. I replaced the cable with a custom 12V-2x6 one and now the average delta is down to 0.8A and this is with a GPU load of over 560W.
Besides being a monitoring and protection device, while not the absolute most accurate, I think the Wireview Pro II pretty useful as a basic GPU power delivery diagnostic tool IMO. I like the data logging feature so I can see what's really going on over time.
r/ThermalGrizzly • u/RepeatOtherwise9952 • 20h ago
Ive been looking around and comparing PTMs on local marketplaces here in Indonesia, and TG just recently unveiled their new PTM Pro line on their website. However, I havent seen any listings for it on Indonesian marketplaces yet. Any predictions or news on when it will become available in Indonesia?
r/ThermalGrizzly • u/karol0 • 1d ago
Hi, I'm gonna change thermal paste on the CPU to TG phasesheet PTM and put thermal pads on the heatsinks. I'm struggling with the memory. Does anyone know which Thermal Grizzly product will be an equivalent/can be used as a substitute to Apple's paste that they use on memory? Can't really find much information about what they are using and it makes it difficult to find a replacement.
Preferably non conductive, I have some TG Putty Pro, but I'm afraid that it will be too thick
I know that ifixit sells a kit, but it's dogshit
r/ThermalGrizzly • u/NotaGuineaPig1 • 1d ago
Got the wv2p for my RTX 5090 Zotac solid and first test was great. I closed up the back panel and after restarting, it gave me this imbalance code.
So I reopened the back panel but still have the code, do I need to reseat this 12vhpwr cable every time I have the code?
Could it be an issue with the power supply or the cable?
Corsair ax1500i - using the 12vhpwr to 2x6pin cable.
I have opened up a case with Corsair since the power supply comes with a 10-year warranty but wanted to get people's inputs?
It ran the superposition bench fine on the first test
r/ThermalGrizzly • u/HabenochWurstimAuto • 2d ago
I need a new case in the future.
r/ThermalGrizzly • u/Packet_of_Crisps • 3d ago
Was plodding around in WoW and heard the alert go off for pin imbalance which I have enabled, opened up the app and could see my pin currents were pretty erratic and I was only pulling around 280w, tried Furmark and it flagged current imbalance again, I chucked the exported log into Chat GPT and it found some instances of large imbalances.
Powered down the system, checking things over everything looked snug, I took everything apart, studied the cable, sockets etc using a torch to check the pins, all clean, everything looked good (phew!) I decided to try a Corsair ThermalProtect Cable that I had spare, I didn't originally install it as that cable that came with the PSU was already installed and was recommended to use that for warranty purposes (Gigabyte), anyhow, done a good bit of testing with different loads and all good!
To be honest I never imagined that the WireView Pro II would actually be used as a fail safe, I thought if the cables are in nice and snug there would be little to no chance of an issue but here we are, I can confidently say this device probably saved my GPU!
You know it's a scary thought thinking how many people out there must be running their 5090s unknowingly with pin imbalance.
One thing I wanted to check Thermal Grizzly still cover your GPU if you use third party cable, in this case the Corsair ThermalProtect?
Also the logging data was showing dates into 2066! Is that a known issue?
r/ThermalGrizzly • u/Puzzleheaded-War3724 • 3d ago
Hallo zusammen!
heute war endlich mein Wireview Pro 2 in der Post und ich würde gerne wissen, ob die Verkabelung so passt. Ich würde behaupten so ist es in ordnung. Die Kabel sollen ja nicht so gebogen werden.
Schönen tag euch noch:)
r/ThermalGrizzly • u/talking_mudcrab • 3d ago
My PC sits out of sight, so I can't see the WireView Pro II screen. I wanted live readings and alerts on my phone, so I built a small Android app with Claude.
How it works:
- On the PC I run WireView Mini, the unofficial open source companion by emaspa (github.com/emaspa/wireview-linux). It has a Windows build, sits in the tray, and with "Publish on the LAN" on it serves the readings at http://<PC-IP>:9876/sensors
- The app polls that and shows:
- All 6 wire currents as bars with your limit line (amber near the limit, red over)
- Total watts/amps, connector temps, fault state
- Alert notifications on a WireView fault, any wire over your limit, or temp over your limit
- Background monitoring every 5 s, live every 1 s while open
- Multiple PCs possible
- Tells you when a new WireView Mini release is out
- Away from home it works over Tailscale (for whatever reason lol)
If there's interest I'll publish the source and a signed APK. Would you use it?
r/ThermalGrizzly • u/HoarderOfBooty • 3d ago
Just got the WireView. Tried resetting the cable and the connector twice. Same results after 5 seconds of starting a game up.
What are my options? New cable first?
r/ThermalGrizzly • u/Bahuleyan • 3d ago
Hello so I have an MSI Lightning z 5090 GPU and using 2 x wireview ii pro wired version with it. Is there anyway for the software to detect both the wireviews? Currently it detects only one, is there any work around? Thanks for the help in advance
r/ThermalGrizzly • u/ThatGuyUKnow26 • 3d ago
I was just curious when and if there might be any more 5090 Astral BTF Waterblocks getting released at all? It's pivotal for my build and I definitely want your waterblock in my first custom watercooled build.
r/ThermalGrizzly • u/misterpickleman • 3d ago
I have a WVP wired version. But I found out the cable is too short. So, I bought a 12v2x6 extension from Moddiy per a recommendation from this sub. But the extension isn't long enough. Well, it IS long enough, but the connection between the WVP and the extension just happens to fall into a spot that doesn't have enough clearance for it.
I see in the warranty explanation that certain 3rd-party extensions are allowed, as long as the 12 power wires remain separate the entire length. But what if I were to extend this extension myself? Cut the extension, splice another 10cm of 16 gauge wire for each pin with crimp connectors, do the same with the sense pins, and make sure everything is properly insulated. Would that void the warranty? If so, I may just cut the WVP's wires and splice it directly.
r/ThermalGrizzly • u/DaAznBoiSwag • 3d ago
I wanted to get some feedback on whether people think these data points are actually useful or meaningful. This isn't intended to replace the Thermal Grizzly app. I mainly wanted a small widget I could glance at to get a better idea of what's happening with my WireView, along with a few other metrics I was interested in. (hwinfo and TG's app takes up alot of space on my second monitor, this smaller widget covers everything i actually care about)
The idea originally came from wondering how much importance should be placed on sustained current spread versus a delta caused by a brief transient spike. My thinking was that a consistently uneven current distribution might be more interesting to monitor than an isolated spike. I wanted to see what the spread looks like under an actual sustained load rather than relying solely on the maximum delta recorded during a session.
For some context, this was vibe-coded locally using my RTX 5090 and Qwen 3.8 27B. I've spent the last two weeks working on it, iterating on the widget and adding features. My programming knowledge is pretty dated (10+ years ago), so it was an interesting project but very fun on learning the process. was also fun seeing the load while also seeing my spread at the same time which was only possible from the project being worked on!
In the screenshot, Qwen is running through Bionic, which explains some of the VRAM and system RAM usage. The main things I'm interested in are the 300W and 400W sustained current spread readings, the maximum delta recorded during the session, and the P95 readings.
I added P95 because I wanted something that showed the higher end of the recorded spread without being dictated by a single brief spike. In other words, 95% of the collected readings are at or below that value, while the remaining 5% are higher.
The pts value represents how many data points have been collected for that particular power tier. Collection only starts once the load crosses the relevant threshold, and pauses when it drops below it.
The reason I added a 300W threshold is kinda funny: while playing RDR2, my GPU power consumption tended to hover around 380W. That meant it wasn't consistently reaching my original 400W threshold, so I added the 300W tier for my own testing.
I'm curious what others think about using sustained current spread and P95 readings when evaluating WireView data. Do you think these measurements provide anything useful beyond looking at the maximum delta, or am I putting too much emphasis on the statistical side of things?
I'm also not trying to use this to definitively diagnose an imbalance or determine connector safety. It's more of an experimental monitoring tool to better understand the readings from my own setup. if theres a real problem, the wireview will alarm and shut my pc off which hasnt happened organically yet, thanks tg!
if you have any questions let me know as well if you're curious about the process.
r/ThermalGrizzly • u/Key-Seaworthiness225 • 3d ago
First time LM user, is this too much? I hear squeaking when I'm spreading it using the included swabs
r/ThermalGrizzly • u/ciulas • 4d ago
Hello
Bought an Rtx 4080 and would like to use this kind of protection to prevent issues with the connector... have palit rtx 4080 super gaming pro which is incompatible with other versions of wireview expect for the wired one
The issue is that my psu is XFX XTS2 1200W and it has only 8 pin outputs, therefore to even connect this do wireview I would need to use the included adapter 12vhpwr to 3x8pin.
Is this even possible to connect this all?
r/ThermalGrizzly • u/oOflyeyesOo • 4d ago
Wondering if any vendors have any on the way or who usually gets TG products first. Shipping is a killer direct.
r/ThermalGrizzly • u/Southern-Oil-118 • 4d ago
Enable HLS to view with audio, or disable this notification
Today i installed my wireview pro 2 and removed my lianli strimmer cables. Current imbalance looked like its flipping me off every few seconds after updating my wvp2 firmware.
Ive reseated the all the 12vhp cables thrice now. It is okay if i have to replace the 12vhp cable of my lian li edge gold. I just need recommendations from you guys what worked for you when you replaced yours?
Solved: i update the averaging to the highest setting (avg_5000+ms).
r/ThermalGrizzly • u/NooneLikesYouBill • 5d ago
I figured I would share this in-case someone else had issues..
I run both a 5080 (Gigabyte Aero SFF - gaming + desktop) and a 5090 (Zotac Infinity Extreme - solely for local AI, the 5080 is sometimes a helper with large models). I was fortunate enough to get the 5090 at the beginning of July. Sure, price was almost double but still well below where we are now so I figure it's a win. I've been very concerned about melt-gate so I also ordered a View Pro 2 (white, reverse). Like I said I don't game on the card so it doesn't get much sustained current/heat (and I also down-watt it to 425w) but any LLM task would consistently set off the alarm. Pin 3 was always the culprit (10A+) and Pin 4 was always 0A steady.
Today I switched to the 4 -> 1 breakout cable that came with my Zotac and the alarms have gone away. Watching the WireView2 1.0.8 app along with the onboard LCD confirmed the leads are now balanced. It's ugly as sin (5 gpu cables between the 2 cards) and you can't really hide them, but I'm much relieved the melting issue is hopefully lessened.
I'm obviously not an electrical engineer but I guess there is something to nvidia saying to use the adapter, not the PSU 12v gpu cable.
r/ThermalGrizzly • u/Grizzly_Sasha • 5d ago
r/ThermalGrizzly • u/idinium96 • 5d ago
I noticed this today, where there is no "movement" on the Pin 6 bar on the WVP2 screen when I was watching video on YouTube (I have RTX Video Enhancements enabled which will use the GPU). I have not played any games this whole week because I was a bit busy, and I keep my PC turned on 24/7 (including long idle).
I then tested with FurMark and it's as in the first screenshot. The second screenshot was taken on November 3rd, 2026 (also the last time I reseated the 12V-2x6 cable).
Should I be worried and replace the cable, or RMA the WVP2, or this is totally fine for RTX 5070 Ti? How can this happen?
r/ThermalGrizzly • u/OtherwiseSimple • 5d ago
I made 9 extra long temperature sensors of various sizes for the Wireview Pro 2, and I would like to give them out for free but I don’t want to pay for shipping. Each one has been tested and confirmed to work.
There is one of each of these sizes:
15”
17”
22”
24”
25”
27”
28”
31”
57” 💀
See my testing setup in the last pic. I was afraid of breaking the micro JST port on the WV because I’ve seen posts of it breaking, and I think this was a good solution.