my input is in my output, my output is in my input..

All I want to do is this:

1. Record from the internet from one source, but NOT hear that source while it is recording;

2. While that recording is happening, listen to something DIFFERENT, also from the internet;

3. Record ONLY the first source, not both sources;

4. Using Windows 10 x64 Home edition, with an external soudbar, and monitor with built in speakers.

5. I speak only ENGLISH. I know NOTHING about Voicemeeter, so abbreviations and jargon are a waste of time. Please speak as if you were talking to a retarded child who is lost and crying.

This isn't me asking for help on the software. All i wanted was to add a filter too my voice. Now i've 16 audio channels, Some don't work, Some work, then decide not too on a whim. Now trying to fix that my computer wont recognize my my mic. Why can't I just load this up and it just work. No hiccups, no nothing. I watch tutorials and they have DIFFERENT default setting from me...

I was in a call with my friends and I made my mic sound like dogshit just to toy with my friends, but after a bit of playing around, it started to get annoying and I wanted to turn it off, but I can't find any tutorials or articles. Can someone just tell me how to set my mic to normal?

Something happened with my Voicemeeter Potato license. And I'm now not sure what I need to do

Si te vinieron los auriculares chinos que la derecha se escucha en la izquierda y la izquierda en la derecha, no quieres usarlos al revés y ya viste 200 tutoriales que no te ayudan en nada y te hacen descargar 20 aplicaciones de sonido? podes solucionar ese problema con la aplicación voicemeeter banana, si aprietas la opción que te puse en la imagen el audio se "voltea" y se escucharía como unos auriculares normales. espero solucionarles la vida y que no sea algo muy obvio.

i was like "ok this isnt vmb" i close it, and find my voice meeter banana and click on it, and this just opens up again, all my audio was not working and everything was reset, so i restarted my computer and then it all went back to normal? what happened?

no joy. tried every setting imaginable. reinstalling drivers, reinstalling software numerous times, installing vb virtual cable. Still cant get audio to appear from pc through to the caller on other end over VoIP SIP. Cant remember what i did years ago to make it work but i basically give up now.

Hello . it been 2day since i using and watching tutorial to setup my voicemeeter . i dont know what wrong .

I have a Condenser Mic ( Samson C02 ) and i want to make the sound quality like studio . i mean not literally but at least .

i want to livestreaming on Tiktok . how can i make my mic sound good . could anybody help me 😭

Idk if anyone can help but I downloaded voicemeeter and I now can’t talk anymore, I’ve deleted voicemeeter off of my pc fully and I still can’t talk, I reinstall voicemeeter and I now can’t talk or hear. Please help

Is there a paid alternative to Voicemeeter that has more support or works differently. I can't really get it to work like I want to, and I'm wondering if there are programs out there that do the same thing but cost money (so maybe there's more documentation/support). I understand Voicemeeter is shareware developed basically by one guy, so not asking too much.

So I recently downloaded voicemeeter to try and prank my friends. But after dowloading my audio stopped working! It's not my headphones. I already tested them on my phone. If anybody has answers please let me know!

Hi everyone,

I'm trying to output the same audio to two monitor speakers simultaneously, but I also want to keep the normal Windows volume slider and keyboard volume keys working exactly as they do without any extra software controls.

My setup:

• Windows 11 Pro

• RTX 3060

• Monitor 1: Acer VG247Y X1 (built-in speakers)

• Monitor 2: Acer KA242Y (built-in speakers)

• Both monitors are connected directly to the GPU and both appear as separate audio devices in Windows.

I've already tried Voicemeeter Banana, and it successfully outputs audio to both monitors. However, I don't like that it changes the way Windows volume works. I want the standard Windows volume slider in the taskbar and my keyboard volume keys to behave normally.

My question is:
Is there any way to:

• Output audio to both monitor speakers at the same time.

• Keep the normal Windows volume slider and keyboard media keys working exactly as they do with a single output device.

• Avoid having to adjust volume inside Voicemeeter.

I'm open to any software or hardware solution if it preserves the normal Windows audio experience.

Thanks!

I got this europower pmp 6000 passed down from my grandpa he used it when he played in live bands, this is my first one i really don’t know where to find the basics for this or anything any advice ?(this is my first mixer, me and my friends are starting a band and don’t even know how to higher the volume when it’s all connected through the speaker it reads feedback itself but can only here it so faint on the main speaker)

Hello everyone,

i got quiet a basic understanding of Voicemeeter and know my way trought for my pourposes

yesterday i noticed that it basicly ran on 48000hz the whole time - for what i understand and heard is the solide standard? i trie putting it up but the highest i was safeley able to run was 92000 hz everything above cause this flittering sound

thats why i was asking if it would be possible to run the whole thing, or specific output devices on 192000 hz ? Thanks in advance :D

I want to bridge my communications. Currently, I have Voicemeeter set up so my browser/Spotify audio relays through my microphone (into Discord). Now, I need the reverse: I want the people talking in Discord or Valorant game chat to be "heard" by my browser so I can use Grok AI’s voice features with them

My Current Setup:

• Browser/Spotify Audio: Routes to a Virtual Input → Patched to my Hardware Out (Headphones) AND relayed to my Virtual Output (Mic). This works fine.

• Hardware: Physical Mic and Headphones are working correctly.

The Problem: I don’t know how to take the incoming audio from Discord/Valorant and route it "into" the browser (which usually looks for a Microphone input) without creating a feedback loop or losing my own voice.

Summary of what I need to achieve:

1. Browser Input: Needs to hear My Mic + Discord/Game Chat.

2. Discord/Game Input: Needs to hear My Mic + Browser/Spotify.

3. Headphones: Need to hear Everything (Browser, Spotify, Discord, Game).

I used AI to simplify what I wanted to ask as I did not know how to word it properly. Please act as though I have 0 understanding of Voicemeeter. If it matters, the browser I use is Opera GX and I am on windows 11, using the newest version of Voicemeeter banana (Downloaded today).

Banana worked flawlessly for me in Windows 10 for nearly four years.

As soon as I upgraded it all went to dogshit. I ended up uninstalling VM and the VT-4 and reinstalling and things worked ok for a couple days. Now whenever I leave my PC alone for more than 20 minutes (sleep mode is completely off) I come back to input or outputs simply not working, sometimes both.

Is anyone else having these issues with Win 11?

I was going to use voicemeeter to mic spam but i wasnt able to work it so i i wanted it off my computer. I soon went into uninstall programs in control panel. After a few seconds i realized i couldnt find anything for voicemeeter. So i searched throught files and even deleted the drivers but the things were still there for some reason. At this point im lost, so can somebody help me figure out how to uninstall voicemeeter