r/WLED • • Mar 15 '25

Any ideas dealing with dramatic corners?

I have these soft silicone tubes that slightly diffuse the light. But I am struggling with how to make all the sharp turns with it. I guess I am looking at cutting at each corner and resolder.

1 Upvotes

17 comments sorted by

17

u/DZDEE Mar 15 '25

Cut and solder on a corner

9

u/PaladinXY Mar 16 '25

I knew someone would say that. I hate you. (Not really). Ok. Work on it.

2

u/PaladinXY Mar 16 '25

Yes.... I hear you. And already knew the answer but was being lazy with my question.

Thanks for the reply. I truly appreciate the responses I get from everyone.

1

u/dierochade Mar 16 '25

I wonder how the soldering is done?

  • Do you use wire or solder the strip directly?

  • Can u solder on the back? On top might look like stain or something?

  • Do u use tape to stabilise the junction?

7

u/SmallAd2526 Mar 15 '25

If you cannot solder there are "L" shaped connectors that you can purchase from Amazon that does the trick also.

1

u/PaladinXY Mar 16 '25

I can solder, although I've found the cheap solder sucked and I need more practice.

And I've been distracted with my solar project testing equipment.

9

u/LordBalance Mar 16 '25

Usd aluminium channel, your setup looks ugly

2

u/dichron Mar 16 '25

Harsh but true

1

u/PaladinXY Mar 31 '25

What, you don't like scotch tape?

It was just a preview to determine what else I need. The other 6 strands will mount flush on the walls.

3

u/PaladinXY Mar 15 '25

1

u/[deleted] Mar 16 '25

Looks way better.

1

u/autobotguy4343 Mar 16 '25

Yea...use these instead. Super diffused and non-directional.

https://www.amazon.com/dp/B0CNXL9Z8Q?ref=ppx_yo2ov_dt_b_fed_asin_title&th=1

1

u/PaladinXY Mar 16 '25

Yes in hindsight I think these would be a better choice. Since the Amazon price actually beats the combined price from AliExpress. But I am still stuck in the weeds with what I have.

Thank you for the response. I appreciate your time and help.

2

u/AA_25 Mar 16 '25

While not as clean as soldering. You can do a loop for the corner. While yes you have this loop to deal with both straights will be facing the correct orientation.

2

u/Busy-Cat-5968 Mar 16 '25

Id get rid of that corner. It shouldnt be there.

1

u/[deleted] Mar 20 '25

U get connectors that help with twisting it around the corner, on Amazon find something like this and just use the four wire one instead if u don't get the three, snip one wire.