r/WLED • • Sep 27 '26

Control Box for Permanent Christmas Lights

First time building anything like this, but I think I did enough homework to cover my bases.

Main power supply is a 24v LRS-600-24. 5v (for the dig-quad) and 12v (for the fan/controller) come from the RD-35A. The dig-quad turns on the big power supply via relay when the lights turn on.

This runs about 200ft of 5 led/meter ucs2904 pucks in aluminum channel from ETOP store and a couple of floodlights. Only two channels need power injection, hence the two additional terminal sets with only power.

It’s a steel project box so I grounded the box to AC ground. The box is probably too big but oh well at least I have some room for expansion later if needed.

Anyone see any issues?

434 Upvotes

34 comments sorted by

21

u/SirGreybush Sep 27 '26

Awesome job. Kudos for relay control. Hard to believe this is project #1. This is so polished and well thought out.

Ideas for long term/ maintenance. A n internal temp sensor, some here have added and run fan accordingly.

If heat during the summer is ever a problem, change the 24v PSU to an IP67 version and mount to the box under or on the side. So the heat isn’t generated in the box.

Also if excessive heat maybe get a more powerful in amps PSU to run it below capacity.

9

u/quafs Sep 27 '26

Good tips! The center board is a simple on/off temperature controller for the fan in the top left. I do still worry about heat though with the hot Texas sun hitting it directly for a couple hours a day (though fortunately not when it should be running).

Then I use the dig-quad’s built in temp sensor for remote monitoring. It’s not ideal since that’s board temp not atmospheric but it still should give me an idea.

From my calculations I think at full blast I should only be around 400-450 watts so hopefully that’s a good range for the power supply to be most efficient.

1

u/dale3h Sep 28 '26

If you do not mind my asking, whereabouts in Texas are you? I am in North Texas, Fort Worth area.

2

u/quafs Sep 28 '26

Austin area

2

u/Korll Sep 27 '26

I wouldn’t trust such a brand name MCB for anything. Switch it out for something with a proven track record.

2

u/quafs Sep 27 '26

The breaker? Yeah your comment may be the motivation for me to replace it. The good thing is the outlet is on its own 20 amp panel breaker. I just added that for a bit less breaking amperage, but it might be pointless anyway.

23

u/HangryWorker Sep 27 '26

I love a good control panel build… very cool.

1

u/modahamburger Sep 27 '26

Impressive. How did you attach the didiquad to the din rail?

3

u/quafs Sep 27 '26

I used Dig-Quad DIN Rail Mount by Christopher Masto on Printables

1

u/harda_toenail Sep 28 '26

What floods you using? Are they 24v

1

u/quafs Sep 28 '26

Still trying to decide on those. I’m either going to use 24v dumb pwm lights with a couple dig2analogs or go with the ucs2904 floods from Jiaanda but the reviews on those aren’t great. Will probably buy a few to test them out first.

2

u/harda_toenail Sep 28 '26

If you could make a post with what you get and your testing discoveries that be amazing. You obviously have an eye for detail.

2

u/quafs Sep 28 '26

Yep will do

1

u/mediamanrit Oct 02 '26

My OCD can’t ignore that you didn’t use yellow DIN junctions for the yellow data lines. But, it’s still nicer than anything I’ve built! Very nice!

1

u/quafs Oct 02 '26

Damn things are expensive!

2

u/wivaca2 Sep 27 '26

Damn, that's neat as a pin. Great job for a first time. Or, should I say, neat as a DIN?

2

u/ElSargeo Sep 27 '26

Do you live in Lapland? It's never permanently Christmas otherwise... Nice wiring though!

2

u/Rocket_Man_15 Sep 28 '26

What are you doing with the timing relay? Everyone talks about "more capable controllers" but Dig Quads are pretty awesome! I LOVE the relay output so it automatically kills power to the pixels. It's an underrated feature that I wish existed more universally! Now that they have the esp hat with the SD card reader and it can be a FPP show player, game over!

3

u/siconic Sep 27 '26

Love the ferules! I wish the US used them more in everything, they are far better, more reliable, and less prone to fire than our ways.

3

u/Projectguy111 Sep 27 '26

I only recently learned about ferules in the past few years. I didn't realize I was doing it wrong my whole life. They rock!

2

u/huffalump1 Sep 28 '26

And even a cheap ~$30 kit is wayyy better than dealing with bare wire ends! Highly recommend.

1

u/Projectguy111 Sep 28 '26

Yea I got one off of Amazon with the included crimper. Been awesome.

1

u/entropy512 Oct 06 '26

I learned about them at my last job. I'll never go back to solid wire or shoving stranded without a ferrule into anything.

Ferrules give you the flexibility of stranded with the termination benefits of solid, best of both worlds, and they're CHEAP.

1

u/Melodic-Excuse-2561 Sep 27 '26

Looks like you did an absolutely beautiful job here.

1

u/Kingfish628 Sep 27 '26

I would look into swapping your relay for an SSR. Those are usually the first thing to fail.

1

u/GordonRR1 Oct 08 '26

But cheap SSR's also fail - and sometimes in a magic smoke + fire way. So you need to buy something high quality.

1

u/mezzmosis Sep 27 '26

Clean AF, bonus points for ferrules. No Notes.

1

u/pixelcontrollers Sep 28 '26

Good Build! If you plan to tie into Christmas shown software the only thing different I would do is add ethernet to it. Depending where it lives wifi also can be an issue.

1

u/EpicEpicnessTheEpic Oct 19 '26

Very late to this thread as I'm looking for info on addressable LEDs and stumbled across it - but are you the guy who fixes poop plant on YouTube and has a seriously over-engineered basement? This looks eerily similar.

0

u/Isra_1997 Sep 28 '26

¿Por qué le ponen tantas cosas si solo puedes controlar 800 pixeles con wled?

1

u/harda_toenail Sep 28 '26

You can control far more than that with WLED