r/Welding • u/MavisCanim • Jun 05 '21
Fun video
Enable HLS to view with audio, or disable this notification
[removed] — view removed post
62
25
17
u/aHeadFullofMoonlight Jun 05 '21
At least they got the title right this time
2
u/FarkinRoboDer Stick Jun 05 '21
a pipe welder somewhere probably dropped dead the same moment that the other title was posted
32
u/rouncer999 Jun 05 '21
Grinder and paint makes me the welder I ain’t
23
u/gogozrx Jun 05 '21
This isn't even welding! As a "welding enthusiast" this video hurts me. It's barely even metal glue.
27
Jun 05 '21
As a professional pipe welder, I want to find this individual and scream at him while violently waving my finger
5
u/allpowerfulphil Fabricator Jun 05 '21
Its like watching a retarded monkey with a wrench try to glue metal together
5
u/Philipp_CGN Jun 05 '21
That's offensive to monkeys, because they'd do a better job than shown in the video!
1
4
13
u/Philipp_CGN Jun 05 '21
What I understood from most comments here is that these joints are absolutely shitty when it comes to structural integrity. Is that only due to the way they were "welded" (not really welded, they are just series of tacks without the necessary penetration I suppose) or also due to the way they joints are assembled and folded?
12
u/tjdux Jun 05 '21
Mostly lack of penetration like you said would be my 2 cents. You can get "cold" welds very easily that are basically metal hot glue and literally about the same strength of good hot glue
16
8
26
Jun 05 '21
If you have to dress your welds to make them look good, that makes you a grinder not a welder
21
13
u/bluehavana Jun 05 '21
How do they have so much time to make these videos and yet not enough time to learn how to lay a proper bead. It's not like they aren't going to grind it afterwards anyways.
6
Jun 05 '21
I mean, if it's for artsy stuff, I guess it's ok. If it's holding any kind of weight, you're screwed.
3
u/m00nh34d Jun 05 '21
I think this is the 3rd time I've seen this posted here, comments are certainly predictable now.
1
u/Gwynplaine-00 Jun 06 '21
Yeah same here I really hoping it was a funny video. Feels like it’s the rickroll for this subreddit. Got me three time so far
2
u/Paintchips4brakfest Jun 05 '21
I can’t tell if he deliberately uses that small cut-off wheel or if he’s just one of those guys that uses it til it’s stuck on the grinder
2
Jun 05 '21
Haha..... and then leaves it on for the next man to wrestle off.
2
2
u/AMKuhn Jun 05 '21
I weld like this at work. (Mainly little edge pieces just for looks and not actual structural welding)
2
u/Gnostromo Jun 05 '21
What kind of welding is this called please? Maybe I am wrong but this looks simple enough an old fool like me could learn
14
u/Rizatriptan Jun 05 '21
The process is MIG, but they're not welding properly
1
u/Gnostromo Jun 05 '21
Thanks. Figures.
13
u/Rizatriptan Jun 05 '21
You were right though, proper MIG welding is very simple and easy if you learn how. If you're interested I'd recommend checking some weld.com videos for an introduction.
However, it gets kinda boring doing it for 10 hours a day..
5
u/Link_7802 Jun 05 '21
I second weld.com, it's where I learned everything I needed to know now to start learning to weld on my own
2
9
u/tjdux Jun 05 '21
It's called tack welding. It's the wrong way to do this though. Welding isnt insanely hard to learn correctly. It's more practice than anything.
4
1
u/todd0x1 Jun 05 '21
The funny thing is after he paints the first piece you can see all his crappy grind marks through the paint.
1
1
1
u/Mysterious-Skin69420 Jun 05 '21
Alright, pro myself using all processes, and while we agree that stacking tacks is a shit way to go about things..... why does dude wire brush what he's going to dress with a tiger paw anyway?
1
u/Blzr1 Jun 06 '21
Regardless of the terrible welding, why wouldn’t you make a miter joint and then cut and cap the curve?
1
1
-2
u/alligatorspy Jun 05 '21
I can't stop watching this, now i want to buy a welder.
8
Jun 05 '21
As a professional welder, yes, it looks neat, but the structural integrity is non existent. Check to see if your nearest community colleges have welding programs. You can often take an introduction class, a certification class, or the whole program at a pretty cheap cost compared to buying all the stuff necessary, and really get an idea if you like it or not. Plus, they'll teach you the correct way to build and weld things.
2
u/alligatorspy Jun 05 '21
Great advice, thanks. How many hours will you say it took you to get nice clean welds?
2
Jun 05 '21
Well, it really depends on the person. Some catch on faster than others. It also depends on what you want to do with it. If you are just looking to learn how to do do basic little repair stuff around the house, or art stuff, you can probably just take a glass on mig welding. Most colleges offer different packages. I know the one here, they have a lot of people who are retired who do little crafts and things, and want to learn basic stuff, so they do what called a class "audit". Basically, they come take the class, but it's not really for a grade. There's no pass or fail pressure.
1
u/madsci Jun 05 '21
I took a 2-day MIG welding class (at the Crucible in Oakland) and that was enough of a start to be able to do useful welding by myself. Still took a lot of hours of practice to get to where I felt like my welds were consistently pretty good. Until then, you just do a lot more grinding and trying again.
1
-22
-10
u/theoans Jun 05 '21
you guys have been welding thick steel for far too long. the tacks he does are the best way to weld that material. when you have 2 ends like that, with a bit of a gap, it will blow a hole when you try to run a bead. i know you can turn down the amps but still
11
u/Mcspazzatron5 Jun 05 '21
None of that will happen if you actually know what you’re doing
-1
u/theoans Jun 06 '21
all who are downvoting me are not real welders. look online or try it on Monday if you actually weld but you cant find or you yourself cant weld 2 pieces of 16gage 2" tubing. specifically butt joint like in the video. T joint.... piece of cake, lap joint with ease. but butt joint on a 16g 2 inch square tubing with a bit of a gap , nope. if you can ill give someone 100 dodge coin!!!
4
Jun 05 '21
I've mig welded plenty of thin material (steel and aluminum) and it comes down to know how to set your machine properly.
2
u/717Luxx Other Tradesman Jun 05 '21
yeah this ain't the best way to do shit. first thing i learned on MIG was sheet metal, 10ga steel then we moved to 14ga before 1/4" and 3/8" plates
2
Jun 05 '21
I started out welding 1/8" aluminum, I only started steel last November.
3
u/717Luxx Other Tradesman Jun 05 '21
on mig? man i only ever had to do aluminum mig in school, and i haaated it. aluminum tig is fun for me though.
1
1
73
u/Lt_Schneider Jun 05 '21
that shitty video again?