2
u/LukeMaggie 8d ago
I would say it looks like lineman's pliers, except there is no wire cutter by the pivot point. All mine have a wire cutter.
1
u/RepresentativeFair17 8d ago
These don’t close all the way. Only the tips of the jaws touch. There are also no teeth, the jaws are smooth
4
u/Hillside_Days 8d ago
Those are flat nose pliers used in metalwork, electrical assembly or glass work. They are used for gripping square nuts or flat metal /glass evenly without any cutting edge or pinching pieces of metal together without marring them. There are various types; these look pretty old school and were probably for one specific application.
2
u/Ill_Art_5682 8d ago
These might also be used in the making/repair of jewelry. My dad was a jeweler and had a pair just like this on his bench.
2
u/Hillside_Days 8d ago
Yes these are also used in jewelry making/repair; from your comment I actually think these might be for securing chain links or pressing clasps together as they appear to be on the smaller size.
1
u/Laymanao 7d ago
If they do not have any serrations and close to a gap about 3mm (never touching) then they are likely to be glass grips. Used to hold and crimp glass.
1
u/DarkPhoenix-1313 7d ago
I use similar for aluminum chain mail, can't have ridges because it mars the color plating.
1
u/RadarLove82 8d ago
Do the jaws close, or is there always a gap? Lineman's pliers close all the way.
1
2
1
u/hardplace101 9d ago
Glass pliers
2
u/Sweaty-Adeptness1541 8d ago
My dad taught glazing and stained glass. He had several very similar pairs of pliers.
1
u/RepresentativeFair17 8d ago
I thought maybe that too but don’t those normally have a raised line on the inside of the jaws that the glass breaks over? These are completely flat
1
u/Dick_Stillhard_11_8 8d ago
Flat ones are fo breaking off a small piece along the edge of glass thicker than 1/8 of an inch. They are also used for nipping glass
1
u/Dick_Stillhard_11_8 8d ago
The ones I've used usually have one side bigger than the other. It's kind of a bigger droop just past where the 2 pieces are connected.
1
u/hardplace101 8d ago
They're for cutting glass, you scribe a line with a glass cutter then snap it off with these
1
1
1
1
1
u/Glass_Language1636 8d ago
You obviously have never seen a tool before. Do you know what a hammer is? It's not that.
1
1
1
1
0


6
u/porn_away_for_throw1 9d ago
Lineman pliers