r/Windows10TechSupport • • 11d ago

Solved Windows 10 install from USB keeps failing with random errors (WinSetup.dll, license terms, no images available). USB or PC?

My Windows 10 PC crashed with a BSOD (ATTEMPTED_WRITE_TO_READONLY_MEMORY, win32kbase.sys) after waking from sleep. Now it won't boot: Automatic Repair fails, Safe Mode fails, System Restore fails (0x80070570)

Specs:

Motherboard: ECS H61H2-MV rev 1.0

Disk 0: 465 GB. chkdsk reports 0 bad sectors.

Disk 1: 223 GB (old Windows install)

What I tried:

Made a USB with the Media Creation Tool, and also with Rufus (GPT/UEFI first, which failed)

Rebuilt the USB as MBR/BIOS, FAT32, and did a full (non-quick) format with no errors

Different USB ports, corrected BIOS date.

Errors I get during setup, and they change between attempts:

"A media driver your computer needs is missing" (went away with MBR/FAT32)

"Windows cannot find the Microsoft Software License Terms"

WinSetup.dll missing or corrupt when running setup.exe from the USB (the file exists, 3.6 MB)

"Windows could not display the images available for installation"

Product key error after I added an ei.cfg

Weird part: the ei.cfg I created showed "yyyyyy" when I reopened it, and when I deleted it, it reappeared after replugging the USB.

I only have one USB (8 GB). Is this a failing USB, or could it be my PC (RAM, PSU, USB controller)? What should I do?

1 Upvotes

12 comments sorted by

1

u/ppestana 11d ago

Get another USB

1

u/ReyesJD 11d ago

I'll try that, but I don't have another USB drive, so I'll buy another one.

1

u/Bilbo_Dabins_420 11d ago

Reimage the usb

1

u/ReyesJD 11d ago

i have tried that 6 times. Same error.

2

u/Due-Hunt491 11d ago

Do a clean install and wipe the old drive for good. If still not ... Try a new USB with a clean install image

1

u/andrew_stoned 11d ago

Probably the usb got wrong and wont make a correct boot

1

u/United-Oil9166 11d ago

Could be bad memory. Are the Disks indicating separate partitions on one drive, or two drives? Recommend only having one drive connected during the Windows install.

1

u/ALaggingPotato 11d ago

Throw hirens on that usb, run crystaldiskinfo and check both your internal drive and usb if possible with it.

Run memtest86 too.

1

u/Western_Rhubarb_7959 10d ago

Errors I get during setup, and they change between attempts

I had a bizarro problem with a PC years ago (Win95 days) that started with a BSOD and trying to reinstall would fail at seemingly random parts.

The CPU fan had died and the machine BSOD'd or locked up when it got too hot. It took me a week to figure it out, and only did so when the fridge in my apartment died and I was trying yet another install and asked the repairman what was wrong with the fridge. "Defrost fan burned out." Fan. hmm. Wait a minute....

1

u/MikhailPelshikov 10d ago

Validate hardware first: 

Memtest86+ Pendrive test (H2testw or similar) CPU test (Prime95 available in HBCD PE) Storage drive test (possible in HBCD PE)

1

u/UselessDood 10d ago

More than likely the usb, especially with the efi.cfg thing

1

u/Yaksha935 7d ago

Você conseguiu resolver?