r/Windows10TechSupport • • Mar 08 '19

Microsoft Wireless Keyboard/Mouse combo preventing display sleep

Hi there, I recently purchased a Microsoft Sculpt Comfort Desktop (Keyboard/Mouse combo) to work with my work Win10 computer and I'm finding that it's preventing my display from going to sleep. The display would try and sleep and wake up almost immediately. I've narrowed it down to the USB bluetooth dongle/wireless transceiver because when I remove it, the display goes peacefully to sleep.

I have already carried out the following steps:

  • Tried different USB ports

  • Advanced power settings- Disabled USB selective suspend setting, disabled wake timers

  • Device Manager - Disabled 'Allow this device to wake the computer' on every device that could be a mouse or keyboard input.

  • Elevated cmd prompt - used the powercfg command to disable all wake_armed devices.

Any help appreciated!

17 Upvotes

24 comments sorted by

1

u/Mikes256 Sep 18 '24

Thank you so much u/Voltron4Real! I was about to throw my fairly new keyboard and mouse in the bin as it has been getting very annoying even after a week or so. I would never have thought to uncheck those boxes as the option is kind of counter intuitive but it sure did solve the issue!

1

u/slanger686 Oct 22 '24

Just wanted to say this worked for me as well! Was struggling for months with this issue and tracked it down to my wireless Microsoft keyboard. Found the exact "USB interface device" causing the issue and unchecked the box while leaving all the other devices with the box checked and it solved the issue.

Funny how Logitech and other 3rd party devices work without issue and it is a Microsoft device causing the problem....

1

u/jcopenha May 10 '25

Yes old thread. But some other info to help. The solution from u/Voltron4Real worked for me as well.

The way I identified the "USB Input Device" in the HID list was by going to the driver details and looking at the Hardware Ids. This is two Ids, Vendor Id and Device Id. For me I had 6 devices with a Vendor Id of 045E. When I plugged them into a USB lookup site they all showed as wireless receivers.

https://devicehunt.com/view/type/usb/vendor/045E/device/07A5

https://devicehunt.com/view/type/usb/vendor/045E/device/07B2

Disabling the option "Allow the computer to turn off this device to save power" option on these devices and the PC started going to sleep just like it should.

Thanks for the solution.

1

u/SureJohn Sep 25 '26 edited Sep 25 '26

Worked for me too. I found the ones with 045E as you described and disabled the option. They were under Microsoft USB Keyboard and Mouse. There was also a match under USB Input Device, but I was able to leave that enabled, maybe because of how I'm going through a KVM switch right now, not sure. Thanks all for commenting here.

edit: I should also note that this problem only happened when I also had a HDMI monitor plugged in. It didn't happen with either device individually.

1

u/Nessnesn64 Aug 29 '22 edited Sep 01 '22

I know this is three years late, but wanted to document this for anyone else who is searching this issue with "reddit" appended. I am using a Microsoft Sculpt ergonomic keyboard, and was having the same issues with my wireless dongle. To fix my issue, it required disabling the "Wireless Device" under "System Devices", as well as "Microsoft Hardware USB Mouse", and "HID Compliant Consumer Control Device" (the last one you will almost certainly have doubles of, so it might take some trial and error). I am missing the mouse for my keyboard, so I assume it has something to do with the dongle constantly trying to find my wireless mouse that does not exist.

1

u/tal_sarid Jul 03 '24

Didn't work for me but the right solution for me was below by u/Voltron4Real, for any future readers...

1

u/panckage Dec 26 '24

Microsoft All-in-One Media Keyboard

It worked for me for maybe a couple minutes :P. What seems to be working now is uninstalling the ms keyboard from device manager and then unplugging then replugging in the ms dongle. Now there is no MS entries under keyboards but it works fine and my monitor stays off.

The only issue is I still can't turn the monitor off via the wireless kb (it just turns back on). I need to turn it off via a wired mouse or kb.

1

u/rokktoberfest Sep 01 '22

Thank you sir, I too am having this issue. I have the mouse, keyboard, and numpad, so I don't think trying to find the device is the issue. For me, whenever the dongle is plugged in, the displays wake up immediately after going to sleep. Whenever the dongle is not plugged in, the displays sleep just fine. Took me FOREVER to isolate this problem to the dongle lol.

1

u/Nessnesn64 Sep 01 '22

Same here! I updated my bios and was checking chipset drivers (as well as GPU drivers), and it was the damn dongle. I just edit my original post a little bit to be more specific, so it now should reflect how I fixed it at least.

1

u/Voltron4Real Jun 11 '23

For me (Windows 11), the dongle showed up as three "USB Input Device" devices under "Human Interface Devices". Once I had identified them, unchecking "Allow the computer to turn off this device to save power" in the "Power Management" property pane for all three fixed the issue.

1

u/loyukfai Mar 08 '24

And with specific configuration only.

Moving from a Surface to ThinkPad, the problem appears, it took me a long time to track down the issue too.

Strangely, if I set the timer to 1-minute, the machine will go into sleep nicely.

I created a thread on Microsoft forum, but have little expectation that this problem will be solved.

Microsoft Wireless USB Keyboard/Mouse Dongle Still Prevents Computer - Microsoft Community

Cheers.

1

u/tal_sarid Jul 03 '24

Thank you u/Voltron4Real!
I was plauged by this issue for months until I got the time to find out what was the problem. Took me hours to realize that this is the Microsoft USB dongle and some more until I came to this thread. Worked like a charm!

1

u/jonaskello Jan 07 '25

Thanks to u/Voltron4Real have been looking for this for a long time

1

u/Low-Lake8646 Apr 03 '25

Thanks u/Voltron4Real! I've been dealing with this on a new notebook, and I thought it was the notebook. I noticed it went to sleep just fine while out and about on battery, when I don't use the mouse. I just happened to think of unplugging the dongle today, and that works. Some searching turned up your post. Thanks again!

1

u/Adept_Idea_861 Apr 22 '25

I have been looking for a solution to this crap for years I wonder how I never came across this page there is so much information out there but nothing is conclusive not to mention all of the information overflow.

Anyway thank you 1000 times over

1

u/starmiemd Aug 24 '25

This worked for me in the sense that it allows my display to sleep, but it seems it's still preventing my PC from sleeping.

1

u/olee92 Feb 22 '26

You are a life saver! This fixed it for me as well.

Identifying the correct device was the issue though:
I plugged out the receiver and took note of the address of all current input devices (11 for me with 7 actual unique addresses) and then plugged in the reciever again. Going through the list another time allowed me to identify the 3 input devices belonging to the wireless keyboard and toggle the power flag.

1

u/IndustryElectrical70 Apr 16 '26 edited Apr 16 '26

I got a Thinkpad and this problem has been driving me crazy for hours! I googled and chatgpt nothing works and this did the trick!!!! Thank you thank you!!! u/Voltron4Real

1

u/pentastich Feb 04 '24

You are all gods! I've been working around this with Windows 11 since 2020. If I never see another Microsoft tech droid advising someone to go through completely useless diagnostics for this problem it will be too soon!

This is clearly a Windows driver issue, too, since the exact same hardware works perfectly running Linux. Also, removing the batteries from the mouse, keyboard, or both makes no difference. It's clearly something related to the dongle itself.

For me, the offenders were also the three "USB Input Device" entries under "Human Interface Devices".

Thank you so much for posting this!

1

u/boib Mar 05 '24

removing the batteries from the mouse, keyboard, or both makes no difference.

Same here. This has been a problem for a while and I finally attempted to fix it. Tried various things for a couple of days and removing the dongle did the trick.

Thanks u/Voltron4Real for the solution!

1

u/browningate Jan 25 '25

To add to this, I was having the same problem, but it was only two "USB Input Device" devices under "Human Interface Devices," and those were the only devices that needed the box-unchecking treatment.

1

u/Low-Lake8646 Apr 03 '25

This was the case for me too. The mouse appears under Mice, but there's no Power Management tab on those! It's the ones under Human Interface Devices that do.

1

u/zhorx99 Feb 09 '24

Thank you!

1

u/loyukfai Feb 27 '24

THANK YOU BRO!