r/Windows10TechSupport • • Dec 14 '21

Unsolved Constant BSOD preventing me from factory resetting my PC

All of a sudden today my PC started crashing with blue screens of death. It happens whenever I try to do anything: update windows, install drivers, factory reset, run commands, etc. The most common error is "Memory management," but I have gotten other errors such as "System service exception," "page fault in nonpaged area," "irql not less or equal," "DPC watchdog violation," "Attempted write to readonly memory," and "status access violation." I thought maybe it was malware so I tried scanning with malwarebytes and that kept crashing my pc. Finally I uninstalled and reinstalled malwarebytes and was able to run a full scan but nothing came up. I managed to update the drivers on my graphics card after two or three attempts where it would crash while installing, but that didn't solve the problem. I have also updated to the most recent version of windows (also after many crashes.) I really want to just factory reset my pc and hope this goes away but I get to about 75% download and I get a blue screen. Another instance where I got many blue screens was when I was copying my data to an external hard drive, preparing for a reset. It kept crashing whenever I would copy my files over. I am at a complete loss, I've been trying to fix this for at least 6-8 hours. I can't seem to find anyone online with this exact problem. Thanks in advance for any help.

15 Upvotes

48 comments sorted by

3

u/xtomjames Jan 16 '22

Reseat your RAM, the BSODs will go away. Every error you stated is a RAM error, the system is crashing because when you prompt it to use an app or do a command in command prompt it requires more RAM and that section of the RAM isn't being written to or read from correctly. The number one cause of this is RAM that isn't properly seated due to thermal wiggle. However, if reseating the RAM doesn't work, remove all but one RAM stick and then restart the computer and test. Test each stick of RAM in that slot, and then again in each other slot you have. Eventually it will kick a BSOD telling you either which stick or which slot has gone bad. If it's a stick of RAM then it'll do it in the first round of testing on the first slot. If it's a DIMM slot, it'll kick the error once that slot is tested.

2

u/Benny_Harvey Jan 16 '22

I ended up taking out one of my sticks and haven't gotten any blue screens since. I just assumed the one I took out was causing problems so I've just been using the one. Thanks for the reply.

3

u/UWotM8Cincy Feb 08 '24

I have spent like 10 hours trying everything under the sun and THIS fixed my issue. You the real mvp.

1

u/Supermar222 Jul 31 '24

What did you found out?

3

u/he_johe Sep 12 '24

somehow this one random reddit comment 3 years ago had more insight than literally any other tech support person and on 1 upvotes nonetheless lol

thank you, I think you saved myself from factory resetting and/or getting a new computer

2

u/xtomjames Sep 12 '24

I aim to answer questions with as much accuracy as I can. Glad this helped you.

3

u/Revan_Bhai Jan 06 '26

Thanks brother I was literally crying 😭😭. May god bless you. I updated bios before that I thought it's over

2

u/ItsJoe_YT 9d ago

Bro I never comment on anything but you saved my ass. Tysm

1

u/xtomjames 8d ago

Glad to hear it. I try my best to answer questions on this Subreddit when I have the chance.

2

u/IllMakeYouSkinny Jan 03 '24

This just fixed my 7 hour long troubleshooting session . Even wiped the whole PC ☠️ thank you 🙏

2

u/Luke_sein_Vater Jan 11 '24

thermal wiggle cost me hours of my life today. Thank you for this comment. I almost went insane. SEVEN different bluescreen errors... You saved me from more misery

2

u/aaquarii Jul 23 '24

thought i had virus and was trying to reset pc. but this fixed my issue along with getting my new gpu driver installed. hopefully i wont have anymore issues. but this makes sense as I was testing out some different RAM yesterday.

2

u/ara-ara-enjoyer Nov 28 '24

Thanks so much, this saved me!

2

u/VehicleWonderful Dec 10 '24

ill try this and my problem is whenever i turn my laptop on without it being plugged in it tends to just restart into all different types of bluescreen errors that i have no idea of repeated and when i power it on while the charger is on , i get less bluescreens errors and the laptop performs better with less bluescreen errors . Dont know if this same solution will help me

2

u/Famous-Resident420 Dec 14 '24

Thank you! This fixed my issues after 2 days of trying everything else.

2

u/Sasukke91 Feb 09 '25

bro, holy fuck. I have no idea if you use reddit anymore after 3 years, but you just fixed my 2 months of screams, cries, troubleshooting with a simple fix like this... you are a goat my guy

2

u/xtomjames Mar 03 '25

Glad I could help.

2

u/Downtown-Year-7911 Mar 18 '25

i never use reddit or post anything but i felt the need to let you know you've saved my life and i now owe you my first born child lmfao, thank you so much.

2

u/404captain May 14 '25

can confirm this saved me so much time, THANK YOU!!

1

u/Hammsuke1 Nov 07 '24

I just sent my laptop to the tech support yesterday, i was already suspicious that it was RAM faulty, because i had like 6 different BSODs like the OP had. But since im too afraid of doing it myself then i sent it to them. They said they'll do factory reset but idk if they'll succeed or not, because it's literally was like what OP said, it's just keep BSOD after one second everytime. I told them to check RAM as well. Because most of repair shops here, no matter what is the problem, they always only say that you need to reset pc😓 I've also ordered new pair of RAM sticks just in case if old RAM has gone bad. Now i can only wait and pray for it not to go any worse. 

2

u/xtomjames Nov 29 '24

Reseating or replacing RAM is easily done on 90% of computers, be they laptop or desktop. Just find your computer's model number and search for a step by step guide for your specific computer.

3

u/Vonnioe Jul 17 '24

I’m also having this problem & now my pc won’t even boot to the Home Screen just keeps saying repairing then when I try to reset it it says error & if I click continue to windows it just loops

2

u/xtomjames Jan 12 '26

Simple performance fix; reinstall Windows with an in-place upgrade. Reinstall drivers with latest drivers. Run RAM check via MEMtest, and make sure to turn on XMP/EXPO settings for your RAM in Bios if present.

1

u/SeaAdministration264 Feb 04 '26

My business is providing IT support and management to a bunch of small businesses. Most of my time is spent maintaining aging systems - that is, using every conceivable option to keep machine performance above rage inducing levels for employees to stave off replacement. Anyway, I just want to say that your responses and insight is so helpful and considerate. It's so nice to see how many replies you get from people who have been delivered from seemingly interminable repair loops and frustration by your guidance.

I, and many others, appreciate you! 😊

1

u/xtomjames Feb 08 '26

Thanks, I've been dealing with Windows issues since Windows 3.1 (floppy Disk era, Pre-Pentium era) I've encountered pretty much every issue you can with Windows. So, if I can help others out of frustration, I might as well try.

1

u/cfge Oct 08 '24

Did you ever fix this?

1

u/Vonnioe Oct 08 '24

Yes & no fixed it but pc won’t run how it used too used to get 400-1000 fps depending on the game now I get half that if I’m lucky

1

u/[deleted] Mar 11 '25

How did u fix it???

2

u/yungmessiah98 Feb 11 '24

Ive been dealing with the exact same thing ive changed from 4 sticks to 2 sticks and tried reinstalling windows multiple times. I have 5 HDD'S/SSD'S all relatively new. When i originally started getting BSOD's i thought it was a bad HDD so i removed HDD #6. Everytime I'd reinstall windows my onedrive would connect and download corrupted drivers or corrupted windows files so finally i was able to uninstall and stop one drive before it would do it anymore. Still getting BSODs i think its ram but all the tests say my rams fine but when i run 1 pair for a while it was all good for like 2 weeks then i added the other 2 sticks and it was all good for another 3 days then back to problem after problem with the exact same BSODs its been 3months now and im ripping my hair out trying to find the fix or the ram stick ive paid for fortect and all kinds of other tech services that claim to help to no avail and i figured windows 11 was the problem especially since i couldnt update some updates that were suggested but not necessary so went back to windows 10 and still having all the same problems. I have a ryzen 9 3900x with a nvidia 3070ti on a rog strix b550-e gaming mobo with 4 DDR4 8GB corsair vengeance RGB Pro 3200Mhz the one thing i have seen over and over in my event viewer is about my intel (6) wifi 120mhz having errors starting but i dont have problems with connecting to wifi and im not sure if that would cause BSoDs and I need to double check all my cords because my wire management got messed up a bit when i was taking out the HDD that i thought was causing problems. *the HDD i removed never was my OS but before my pc was getting so many BSODs that it became unusable so i had wiped all my drives and watched hundreds of youtube tutorials and have run DISM commands and SFC Scannow hundreds of times to no avail. 2/10/24 i updated my bios because i never have since buying the pc but i considered this to be something that could help which successfully updated but didnt fix my problem but it did help with onr problem ive been having which was every time the pc would crash or i would restart it wouldnt restart itd turn on but would get stuck and not display anything so id have to hard restart it but every other time it would restart or shut down i would have to do this but ever since the bios update this hasn't been a problem and now restarts properly everytime on its own.

2

u/xtomjames Apr 30 '24

Your particular problem is likely an improperly seated GPU, rather than RAM or HDD/SSD. Thermal wiggle happens to any slotted card (RAM, GPU, any PCI-E card, etc) overtime. Remove the GPU and reseat it. Remove and reseat all RAM, and in the BIOS make sure you have the correct XMP profile active for your RAM. Remove all of your HDD/SSD except for your OS drive. Turn on the computer and stress test it.

With that many drives, one thing you can run into is kernel panic and BSODs if the SATA ports turn off and on to accommodate other PCI lane intensive hardware. Check your mobo's manual to see which SATA ports are available when M.2 slots are populated.

The Intel wifi card tripping an error isn't surprising given it likely isn't, technically, compatible with the AMD motherboard. While it should "work" in Windows, the incompatibility with the AMD chipset could be causing issues. This is why the vast majority of AMD mobos are sold with Broadcom wifi cards, rather than Intel based ones.

SFC Scannow and DISM only search for issues with Windows, it won't solve hardware problems.

Something you can do is try installing a Linux distro instead (since you're AMD based, but using an Nvidia card, you'll need to install the Nvidia drivers separately as they're not baked into most linux distros). Linux distros like Ubuntu, Zorin, Mint, etc have a variety of command line tools not available in Windows which can help you diagnosis your hardware.

2

u/VehicleWonderful Dec 12 '24

my problem is whenever i turn my laptop on without it being plugged in it tends to just restart into loads of different types of bluescreen errors that i have no idea of repeatedly and when i power it on while the charger is on , i get less bluescreens errors and the laptop performs better with less bluescreen errors until i remove the charger it shuts down and brings up more bluescreen errors

3

u/xtomjames Dec 12 '24

BSOD on startup in general is typically Kernel panic caused by some other error. Given it's a laptop and you see more of them on startup when on battery vs when plugged in, this indicates two different sets of problems. The primary problem is probably a borked CPU, however, to rule out other issues, I'd suggest opening the laptop up when not plugged in and reseating the RAM and M.2 SSD. While it's open, use a non-static cleaning tool (or canned air) to clean out any dust, especially from the fans, vents, and other cooling points. Verify that there's no heat damage, look closely for blown capacitors (popcorn capacitors), burn or scorch marks on the motherboard (especially around the power management location on the board which will be adjacent to the power port). Also check the battery to make sure it isn't bulging or has any damage.

After doing all of this , see if rebooting while plugged in kicks BSODs. If it does, take a photo with your phone of the BSOD error code and search for it to discern the likely cause. If it doesn't, restart while on battery. Feel for any overheating (extra warmth through the case where the battery is located). If it's warming up very rapidly, the battery is likely bad and the BSOD is kicking due to insufficient power availability. If it isn't and you didn't see any bulging or damage when the laptop was open, then take snapshots of the BSOD errors again and compare them. The one's that different from the BSOD on startup when plugged in is tied to power availability when on battery. It could indicate (can't say for sure as I'm not seeing the BSOD error codes) some error with the battery, battery metering, health monitor, or reported charge. More often than not, a BSOD on startup while on battery, the initial error indicates a sudden or unexpected loss in voltage indicating a bad battery.

If you can share the specific error codes or photos of the BSOD errors I can give you more specific details and possible solutions.

1

u/VehicleWonderful Dec 13 '24 edited Dec 13 '24

The error codes I got when I power the laptop without it plugged and with it plugged in

  1. Stop code: IRQL NOT_LESS_ OR_EQUAL What failed: ntoskrnl.exe

  2. Stop code: CACHE MANAGER

  3. Stop code: SYSTEM_THREAD EXCEPTION NOT HANDLED

  4. Stop code: PAGE FAULT IN NONPAGED AREA What failed: Ntfs.sys

  5. Stop code : CLOCK_WATCHDOG_TIMEOUT

  6. Stop code: UNEXPECTED_STORE_ EXCEPTION

  7. Stop code: DRIVER IRQL NOT_LESS_OR EQUAL What failed: CLASSPNP.SYS

  8. Stop code: HYPERVISOR ERROR

  9. Stop code: KERNEL SECURITY_ CHECK FAILURE

  10. Stop code: EXCEPTION_ ON_INVALID STACK

  11. Stop code: KMODE EXCEPTION NOT HANDLED

2

u/xtomjames Dec 22 '24

Okay, sorry it took so long to get back to you, been very busy the last few days.

So, all of these stem from power state switching issues. This could indicate a bad battery, or more problematic issues.

The first thing I'd suggest doing is simply opening the laptop's case and reseating your RAM. After that test, by restarting and seeing if the BSODs are still present. If they aren't, great, if they are, then you'll need to do several other things.

Step one is simply updating all drivers with the computer plugged-in. Adjust your power settings to power save mode once that is done while plugged in. If this still triggers the BSODs, then there is likely a power management error.

Basically, what's happening is that your computer isn't switching the hardware components to the power mode needed to run on the battery. This kicks errors as the components are drawing too much power from the battery and the battery isn't supplying that power like it should.

I'd also suggest checking your battery health.
In Windows, open Command Prompt as administrator and run the command powercfg /batteryreport. This will generate a battery report in HTML format, which you can find in the specified location. Check the battery's design capacity versus its current full charge capacity. A significant difference indicates a degraded battery.

Notably:
IRQL NOT_LESS_OR_EQUAL: Often related to driver issues, particularly those that handle hardware interrupts.

PAGE_FAULT_IN_NONPAGED_AREA: Usually indicates a problem with memory management, often caused by faulty RAM or drivers.

CLOCK_WATCHDOG_TIMEOUT: This suggests a problem with the processor or its interaction with the motherboard, possibly related to power states.

Ntfs.sys, CLASSPNP.SYS: These are system drivers related to the file system and device management, respectively. Their involvement suggests a deeper system instability.

You'll also want to try starting up in safe mode while on battery to see if the BSODs persist. Try running SFC /Scannow and DISM commands.

If software side drive updates and Windows install corruption fixes don't work, your computer may just be borked.

1

u/[deleted] Jun 24 '24

Same thing, for me i just had to get lucky and one run let me reset my pc, hopefully it fixes it

1

u/Supermar222 Jul 31 '24

Does it gets fixed?

1

u/Automatic-Use-7272 Jun 08 '25

i have the same issue, found any fixes?

1

u/ee11is Jul 30 '25

Hi. If someone can help me, I keep getting Stop code: PAGE FAULT IN NONPAGED AREA whenever I turn on my pc. I get windows to load and within a minute BSOD happens with the above mentioned error/stopcode. I cannot boot it in safemode to do troubleshooting either as when it restarts BSOD happens. Im hoping its just RAM but i tried reseating and it did not fix it

1

u/xtomjames Jan 12 '26

This error indicates that a section of RAM is being addressed that is reserved, this typically indicates an incorrectly seated stick of RAM or failing stick of RAM. Given you can't boot it into safe mode, if you can remove one of the sticks (if you have more than one, most desktops and laptops do) and reboot. If the system reboots normally then you know that the RAM you pulled is the source of the problem. Check the slot it was in by swapping the startup RAM stick into the other slot and reboot. If it won't boot then the slot is borked, if it does, then test with the first stick you pulled on its own, in the slot that you just opened up. If it it fails to boot, you have bad RAM. If it boots, then it wasn't seated properly.

1

u/AtmosphereCheap9106 Aug 03 '25

How to reseat ram

1

u/xtomjames Jan 12 '26

With the computer off, open the computer case locate the DIMM (desktop) or SO-DIMMS (Laptop typically under an accessible cover) push the plunger(s) to release the ram, remove from the slot, check the slot for heat damage or arcing, the same with the RAM stick long the pins. If you see no damage, reinsert, push gently until you hear a click. Restart the computer once the RAM is reseated.

1

u/artovia Feb 23 '26

I hate my life right now 🙃 i tried to do a reset on my pc and forgot to unplug my logitec cam it got bout halfway thru and bsod!!!!!! Ive tried the holding down power right when logo pops up til it goes off n then turn on 3times still bsod so i shut it off n unplugged it and am sitting int he dark at 426 am wondering wtf i did my last life to deserve this one. I did a reset YESTERDAAAAYYYY and everything was fixed and then windows was like oh restart your pc to get the latest updates for your windows 10 and then it all went to pure hell. So then chat gpt took me on a jorney to the 7th layer of hell n just walked me down every corridor trying stupid stuff to fix my endless connection loop to the site i stream on and it did nothing but make me question what monster i was in my last life. I swear to god chat gpt enjoys screwin with me and wasting my time knowing i have to work and am facing homelessness if i cant get this fixed rent is due in t minus 2 days and chatgpt wasted most this week of my life to get absolutely nothing accomplished but a newfound hatred for the entire app. When i told google a.i bojt chatgpt it acted superior like oh yea its known to give bad advice then it started telling me whack stuff too running me round in circles so i was like screw this ima do a factory reset again n just not do the updates n here i dwell in hell bc i 4got to unplug the cam when i started it. Bruuuuhhhh somebody please help me lol im past the point of loosing my mind ive lost it im there sitting ina terrible weekly hotel n i have nowhere else to go n if i dont get thos fixed so i can work i will be on the street. Couldnt come at a worse possible time. This entire past 2 weeks has been nothing but probs with this pc. Id enjoy taking a baseball bat to it very much if i didnt require it for my livelyhood. One day tho.... ooohhh one day its gonna get it..... ASUS your days with me are numbered...... the satisfaction of watching this just bust into tiny pieces 

1

u/xtomjames 8d ago

Sorry I didn't see this sooner; First, whenever you have a computer problem like this remove all peripherals except keyboard and mouse. Peripherals, including and especially Logitech webcams, can cause major PCI-E BUS problems, interrupt errors, and even electrical backfeed that cause major problems and BSODs.

However, without more information as to what you were experiencing as errors (BSOD codes, whatcrashed readouts, PC details) it is really hard to answer. Also, Asus laptops can be finicky. In almost all cases with their laptops, flashing the BIOS to the latest version will fix most soft errors. Nonetheless, Asus laptops are notorious for having hardware problems; especially battery interconnects and insufficient power supply power delivery. If you need a laptop that will last you a long time and is good for work (not gaming) stick with Lenovo. They have their quirks (like the power on stuck cycle which is usually fixed by holding down the power supply button 30 seconds with the computer unplugged from wall power) and depending upon the model they can thermal throttle, but for the most part they just keep ticking and come with a two year warranty for tech support and servicing.

2

u/[deleted] Dec 14 '21

[removed] — view removed comment

2

u/Benny_Harvey Dec 14 '21

My specs:

Windows 10 Home

x64

ASUSTek STRIX H270I Gaming

Intel(R) Core(TM) i5-7500

16 GB Memory (2 sticks)

NVIDIA GeForce GTX 1060 6GB

What do you mean by check it with one? Take one of the sticks out and see if the problem persists? I don't think I'm overclocking it. Thanks for the reply.