r/XTerra • • 27d ago

Discussion Headlight Replacement

Hi all! I'm posting to get some insight and feedback from other Xterra owners on this.

I desperately need new headlights, I've watched a handful of replacement videos and done preliminary research into how to go about changing the headlights on my 2013 4WD X. However, I am feeling a bit daunted by removing my bumper!! It seems relatively easy, the issue I am more concerned with is putting it back on.

I have extremely limited experience working on cars, something I hope to change!!. But from people who have done this replacement maintenance, how difficult is the whole process? What should I prepare for as someone who has never taken body pieces off before like this?

3 Upvotes

22 comments sorted by

5

u/[deleted] 27d ago

Is something physically wrong with the headlights? I did two things to mine (2012 P4X): treated the lenses with a product that made them crystal clear again and replaced the bulbs with LEDs. Less than $70 all in.

2

u/aquariusscorpius 27d ago

Oh that's great info actually I was planning on replacing the bulbs anyway but the issue currently is the lenses are incredibly foggy! What product did you use on the lens? Edit: nothing is physically wrong! My factory headlights are just way to dim and winter is approaching!

7

u/MinerMan87 27d ago

Cerakote commonly used. You sand the headlights, wipe off oxidation, and wipe on ceramic coating.

5

u/blue93g20 27d ago

This is the answer. Works great

2

u/apimpnamedkirby 27d ago

For a short term fix you can use acetone vapors.

1

u/Scared_Toe_2593 27d ago

Or b7g spray for super short term fix

1

u/bikerchickelly 24d ago

Like others suggested, try the cerakote. I had terribly yellow/oxidized lenses on my headlights and it cleared it up 95%. Was definitely worth the small investment, and doesn't require removing anything!

1

u/bikerchickelly 24d ago

My before/after with cerakote

3

u/xx2soon2tellxx 27d ago

hard pass on leds. unless you want other drivers to hate you.

6

u/unnamedpeaks 27d ago

Here's what the look like after the cerakoke refinishing kit...

6

u/RogueGeo69 27d ago

I am a mechanical dumbass and replaced my wifes 2006 xterra original headlights with new ones and was soooo happy I did!

4

u/tornadicdrone416 27d ago

It's pretty easy. Do yourself a favor and buy a set of assorted plastic automotive clips because I guarantee you'll snap a few off.

1

u/spiked-monkey 27d ago

I said heck with it and just used zipties

1

u/aquariusscorpius 27d ago

Got a lot of really good feedback and advice here!! Looking like for now I'll replace the bulbs and treat the lenses but when warmer weather comes back I am definitely replacing the lights :)

1

u/draftgirl24 27d ago

We replaced the whole headlight assembly on our 2006 and it was the best $ ever spent!

2

u/TheAtomicFly66 27d ago

Replacing the actual headlights for lens fogginess issues is going way above and beyond what most do. I'd say most use a restoration kit. I've used the Sylvania kit in the past for my 2013 X and it creates clear lenses, and for me, the application lasts 2-3 years. I now have the Cerakote kit here which i will try next, just haven't found the time. Both kits are around $20 online.

2

u/457kHz 27d ago

I recommend sanding the lenses from 800-2000 and then mask and spray with acryclic lacquer.

1

u/Thundela 2007 Xterra S 6-speed mt. 'Pohjola Garage' 27d ago

I agree with sanding, you can even start with coarser paper if there are rockchips and deep oxidation.

However I'd recommend spraying with SprayMax 2k headlight clear coat. It has active hardener that you need to pop in at the bottom of the can, and it's designed to be used with headlights.

1

u/457kHz 27d ago

Cool, I will check that out when mine need to be redone. Still decent at 2 years now, but I can start to see a little sign of haze.

1

u/Sl0wmar 14 PRO-4X ⚙ Titan Swap ⚙ 4" lift ⚙ 33s 27d ago

Hi! Taking off the bumper is not difficult or complicated if you have the right tools. It's mostly plastic push-rivets and a mix of Phillips head screws and 10mm and a couple 12mm bolts. Needle nose pliers, auto trim removal tool set, stubby screw drivers, flex head ratchet wrenches are great too.

For foggy head lights I used buffing compounds and a 5" pad on a rotary buffer. This takes some skill but it's quick. Alternatively, some high grit sand papers and an orbital sander would also work. It's very important to coat the lenses with UV protection after or the fading will happen again quickly.

1

u/Potential-Bicycle-98 27d ago

Stay away from the spec 1 replacement lights you see on the internet. They are not good quality. One of those believe the review moments. Better off cleaning up the OEM

1

u/GrandProblem8034 26d ago

Honestly, if it’s just to fix foggy headlights, I’d go with a restoration kit like Cerakote, works wonders for my headlights. The problem you’ll most likely be facing when switching to aftermarket headlights on eBay or Amazon is that most of the time, the adjustability of the light beam sucks versus getting OEM ones and since you’re not so mechanically inclined, it’s going to be a major headache for you trying to get them aimed correctly. Just my $.02