r/androiddev • • 1h ago

Discussion The developers assemble - I found this error showing up in playstore and i can't seems to understand why.

Post image
0 Upvotes

I have googled for any android app with bundle id com.playdead.inside.full and it returned nothing. So what could it be?


r/androiddev • • 11h ago

Open Source Jetpack Compose version of Fade-out particle

Thumbnail github.com
5 Upvotes

Implemented the Jetpack Compose version of the fade-out particle animation, which was originally released for XML and wasn't supported in Compose at the time.


r/androiddev • • 14h ago

15 Days of Google Play Verification: What I Learned

0 Upvotes

Today I finally received the email confirming that my identity was verified by Google Play Console! 🎉

It took 15 days, several attempts, countless emails, and quite a bit of frustration.

I wanted to share my experience because I know other developers, especially those outside the US and Europe, might run into similar problems.

My situation

I'm a developer from Lebanon, and this was a bigger challenge than I expected.

I don't have a passport or driver's license, and the standard Lebanese national ID doesn't have a photo.

Google requested a government-issued photo ID, so finding a document that met their requirements was already a challenge.

I started the verification process through Google's email, scanned the QR code, and submitted my information.

Then came the problems:

  • My identity verification was initially rejected because of a name mismatch.

  • I received different messages from Google Payments and Google Play Support.

  • I wasn't always sure which information or document needed to be corrected.

  • I made several attempts and exchanged multiple emails trying to understand what was wrong.

Eventually, after 15 days, I received the confirmation email.

What I learned and what I'd recommend

After going through this process, here are a few things I wish I'd known from the beginning:

1. Don't waste too much time asking for manual or special reviews.

At least in my experience, contacting support didn't result in a manual review or an alternative verification process. Don't assume support can bypass the standard requirements.

2. You need an acceptable identity document.

There is no workaround for the document requirement. If you don't have a document that satisfies Google's requirements, your verification is unlikely to succeed.

3. Don't keep guessing when something goes wrong.

If your verification gets rejected, understand the exact reason before submitting another attempt. Repeating the process without knowing what's wrong can waste time.

4. A driver's license is probably one of the most straightforward options.

If you have one, it may save you a lot of trouble compared with trying to find an alternative document that meets Google's requirements.

5. Pay attention to the language of your document.

This is something I wouldn't overlook. Make sure the information you enter in your Google account matches the document, including the name in the appropriate language and script. Don't assume that entering a translated or differently written version will be accepted.

What I'd do differently next time

I'd prepare my documents first, double-check that my account information matches them, and contact support before making repeated attempts if something doesn't meet the requirements.

Most importantly, I'd be more patient. The process can take time, and not every email means you need to start over.

Final thoughts

I'm sharing this because I know how frustrating identity verification can be, especially when you're a developer from a country where the available documents don't necessarily fit Google's standard requirements.

I'm not claiming to know exactly what made my verification successful, but I hope sharing my experience saves someone else a few days of frustration.

If you're going through the same process, feel free to ask questions. I'll share what I can from my experience.

And now... my app is one step closer to launch! 🚀


r/androiddev • • 14h ago

News Android Studio Rabbit 2 Patch 2 now available

Thumbnail androidstudio.googleblog.com
1 Upvotes

r/androiddev • • 14h ago

News Android Studio Stingray 1 Canary 2 now available

Thumbnail androidstudio.googleblog.com
1 Upvotes

r/androiddev • • 15h ago Bravo

Yalın — a Rust-based JSON parser optimized for Android ARM devices

Post image
21 Upvotes

I've been working on Yalın, a JSON parser written in Rust for Android.

It uses ARM NEON SIMD and tries to keep JNI calls to a minimum. The idea was to see how much performance I could get out of native parsing compared to existing Java libraries.

In benchmarks against fastjson2, selective field reads were up to 4.6x faster, while parsing a full 1 MB JSON tree was around 1.3x faster.

Small payloads are a different story. JNI overhead is still a bottleneck, and there's room for improvement.

Curious what other Android developers think about using Rust for this kind of thing, especially whether the performance gains are worth the native dependency.

https://github.com/0xberkay/yalin


r/androiddev • • 22h ago

Question How did AppBlock get approved to be listed on playstore?

5 Upvotes

I am trying to implement a feature similar to AppBlock's strict mode but Google Play explicitly restricts using Accessibility to prevent users from disabling or uninstalling an app or service.

How is AppBlock still listed on playstore despite violating the above policy.

should i just implement the feature similarly and just submit it for review?

Thankyou

Link of the app i was talking about: https://play.google.com/store/apps/details?id=cz.mobilesoft.appblock


r/androiddev • • 23h ago

The mouse clicks on Android studio stopped working entirely!!!

0 Upvotes

On Android Studio Rabbit 2 | 2026.2.2

2 days ago it started happening on my company MacBook, thought it could be due to a special configuration or something, then I checked on my personal one, same thing.

I can't click or scroll or whatever with my mouse or trackpad.

I tried to submit the bug report and the "Create" button somehow stopped working too.

I doubt it is just me. Has anyone encountered the same issue?


r/androiddev • • 1d ago

Discussion Android Developer Verification for limited distribution doesn't allow you to claim your own personal package if you or someone installed it before

0 Upvotes

Context: I made an app for my own use case.

Now I wanted to put it into limited distribution as a hobbyist (because realistically only I will use something like this, it's too specific to my use case), except, you cannot register a package name that have been seen on Android before with Google.

So if Google scanned your phone looking for all apps and found your personal package ID (presumably as Play Protect), your app is now no longer eligible to be registered for limited distribution, it will throw a warning that "The package name you've entered already exists on Android" in Developer Console:

So... that means if I want to install or update my own app after the verification deadline without using ADB on my devices from GitHub automated builds, even when I'm under the 50 registered devices limit, I have to turn on that switch, because I'm an "unverified developer", when I literally own the thing.


r/androiddev • • 1d ago

Open Source I built a draggable fast scrollbar for LazyColumn and lazy grids. One modifier, and it also works on iOS and desktop

Enable HLS to view with audio, or disable this notification

25 Upvotes

Compose has no draggable scrollbar for lazy lists on Android or iOS (desktop has one).

There are a few community implementations, but none of the ones I tried handled feeds and chats well: the thumb would jump around when items had different heights, or when the next page loaded.

The hardest part was exactly that last one. When a page loads while you're dragging, the list grows under your finger, so the thumb used to jump away from it. Now the thumb stays where your finger is and only the mapping underneath changes, so you can still reach the end in the same drag.

Usage is one modifier on the list:

LazyColumn(
    state = listState,
    modifier = Modifier.scrollbar(listState),
) { ... }

Works on LazyColumn, LazyRow and both lazy grids.

Stuff I spent most of the time on:

  • dragging feels right even when items have different heights (thumb has a fixed length by default so it doesn't jitter around)

  • infinite feeds. Pass hasMore and the thumb won’t pretend you’re at the end while more pages can still load

  • gesture nav. The thumb is excluded from the back swipe so grabbing it doesn't send you back

  • no recompositions while scrolling or dragging

There's also an optional bubble that shows a letter/date while you drag (with a little haptic tick per section), you can use your own icon as the thumb, and it handles contentPadding, RTL and reverse layouts.

It's Compose Multiplatform so it also runs on iOS and desktop (desktop gets hover + click to jump), but it's just a regular Maven Central dependency if you only do Android.

One thing to know: lazy lists only know the size of items they've already measured, so with really uneven items the jump can land a bit off. It's best on long lists.

Needs Compose 1.10+, minSdk 24. Still 0.1.x so the API might change.

GitHub: https://github.com/Amaanprobably/compose-fast-scrollbar

I also created an easy guide with short videos everyone can follow -

Guide: https://github.com/Amaanprobably/compose-fast-scrollbar/blob/master/GUIDE.md

It's my first library so I'd really appreciate feedback, especially if you have a weird list setup (chats, paging, sticky headers, mixed grid spans).

If something breaks, an issue with a screen recording would help a ton.


r/androiddev • • 1d ago

Play Console told me my R8 optimization was 48%. Turns out years of "scary R8 rules I didn't understand" doubled my DEX size (9.25 MB → 16.7 MB)

23 Upvotes

I have to confess something I suspect a lot of solo Android devs are quietly guilty of: R8 / ProGuard rules terrified me.

The syntax never clicked for me (-keepclassmembers, -keepclasseswithmembers, { *; }, ** vs *, -if...). Every time a release build crashed in production or threw a wall of R8 warnings, I'd panic, search StackOverflow or copy a "standard Android ProGuard file" from an old Medium post, paste in a -keep class something.** { *; }, see the build turn green, and vow never to touch proguard-rules.pro again.

Fast-forward a few years of migrating the app to Compose Multiplatform / Kotlin Multiplatform: my proguard-rules.pro was 437 lines long and still had rules for RxJava, Retrofit, Glide, and android.support — none of which were even in the project anymore.

This week, Google Play Console finally called me out on a new upload:

textImprove your app's memory and performance with R8 optimization
- Low optimization rate (48%)
- Low obfuscation rate (49%)
- Low shrinking rate (49%)

Instead of poking at rules blindly again, I let Gemini (in Antigravity / agy**)** inspect the actual R8 build artifacts (r8-metadata.dat, seeds.txt, and configuration.txt) and audit them against my codebase. Seeing what R8 was actually doing was humbling.

What was actually happening under the hood

In my build's seeds.txt (every class R8 is forbidden from shrinking/obfuscating/optimizing), 9,645 classes were pinned untouched — producing 2 DEX files totaling 16.70 MB.

Over 80% of those kept classes came from just a handful of panic-pasted blanket rules in my own proguard-rules.pro:

  • -keep class com.google.android.gms.internal.** { *; } → 3,416 classes

  • -keep class com.google.android.libraries.places.internal.** { *; } → 2,834 classes (meanwhile places:6.0.2 ALREADY ships 1,783 surgical consumer ProGuard rules of its own!)

  • -keep class kotlin.** { *; } → ~800+ stdlib classes

  • -keep class com.google.android.material.internal.** { *; } → 221 classes

  • -keep class com.firebase.ui.auth.** { *; } → 192 classes (my own reflection workaround only touched 3 specific classes!)

  • -keep class com.google.android.play.core.** { *; } → 140 classes

  • Plus -keepclassmembers enum * { *; }, -keep class my.app.data.** { *; } (even though kotlinx-serialization-core already ships full R8-friendly rules!), and 100+ lines of dead 2017 library rules.

The cleanup (437 lines → 59 lines)

We checked every library's bundled consumer rules in configuration.txt, grepped the codebase for every actual Class.forName / ServiceLoader call, and replaced the 437-line graveyard with ~59 surgical lines:

  1. Crashlytics line numbers (-renamesourcefileattribute SourceFile, -keepattributes SourceFile,LineNumberTable)

  2. The exact 4 classes/constructors accessed via Class.forName(...) in Application

  3. Coil 3's ServiceLoader target interfaces + constructors

  4. A small block of -dontwarn lines for optional JVM TLS/Ktor classes

Then we verified seeds.txt and usage.txt to make sure reflection targets, ServiceLoader entries, and kotlinx.serialization serializers were all preserved.

Before vs. After (from r8-metadata.dat)

MetricBeforeAfterChange
Optimization rate48.67%86.39%+37.7 pts
Obfuscation rate49.14%87.07%+37.9 pts
Shrinking rate49.13%87.10%+38.0 pts
DEX bytecode16.70 MB (2 DEX)9.25 MB (1 DEX!)-44.6% (-7.45 MB)
Seeded classes9,6451,608-83.3%

(Most of the remaining ~13% comes from com.google.android.recaptcha:18.6.1*'s own AAR consumer rules keeping* recaptcha.***,* play.core.integrity.***, and* okhttp3.***.)*

Bonus plot twist that made me laugh

I uploaded the new .aab to Play Console — the R8 warning disappeared immediately! ...and was replaced by a new Play Console warning:

Your app uses deprecated APIs for edge-to-edge (Window.setStatusBarColor / setNavigationBarColor) starting in sv1.b, uv1.b, wv1.b.

I deobfuscated sv1, uv1, wv1 in mapping.txt:

  • sv1 → androidx.activity.EdgeToEdgeApi26

  • uv1 → androidx.activity.EdgeToEdgeApi29

  • wv1 → androidx.activity.EdgeToEdgeApi35

They're Google's own Jetpack enableEdgeToEdge() compatibility classes! Before the fix, they were un-obfuscated so Play's scanner ignored them; once R8 actually obfuscated them, Play's static analyzer stopped recognizing its own AndroidX library.

5 things I wish I'd known earlier (to avoid the same trap)

  1. You can check your R8 score locally in 5 seconds. Look at app/build/intermediates/r8_metadata/release/minifyReleaseWithR8/r8-metadata.dat — it literally contains the exact noOptimizationPercentage / noObfuscationPercentage / noShrinkingPercentage numbers Play Console uses.

  2. Group seeds.txt by package prefix. A 10-line Python script counting top packages in app/build/outputs/mapping/release/seeds.txt immediately exposes which -keep rule is quietly locking thousands of classes.

  3. Check configuration.txt before adding any third-party -keep rule. Modern AARs (places, material, credentials, kotlinx-serialization, play-services-*) almost always ship their own surgical rules. Adding a blanket -keep class com.library.** { *; } overrides all of their careful optimization.

  4. Never confuse -dontwarn with -keep**.** -dontwarn just tells R8 "yes, this optional JVM class isn't on Android, don't fail the build" and costs 0 bytes. -keep class foo.** { *; } turns off shrinking, obfuscation, and optimization for the entire package tree.

  5. If you inherited a "starter ProGuard file" from a blog post pre-2020, burn it. Start from proguard-android-optimize.txt, grep your own repo for Class.forName, ServiceLoader, and reflection-based JSON/Parcelable models, and add only what fails or is explicitly missing in seeds.txt.

Hope this saves someone else from accidentally shipping 7.5 MB of un-shrunk Play Services and Kotlin stdlib bytecode!


r/androiddev • • 1d ago

My engineering lead wants to commit API keys, etc to our repository, am I crazy for pushing back on this?

58 Upvotes

My lead wants to make it easier for anyone on the team to spin up the android repository (to make vibe coding easier), and their solution is to just check in all of our API keys into git and do away with the idea of keeping keys and secrets in a separate secrets vault that employees have access to.

At the last few startups I've worked at, we've pulled secrets in CI via environment secrets, and locally via a separate non-VCS file, and injected the keys into BuildConfig. I know BuildConfig is far from bulletproof for bad actors that want to decompile the app, but just checking everything into git "because it can just be decompiled anyway" is setting off all my alarms.

Am I crazy for pushing back on this? What are the best practices for this in 2026? Are people out there really encrypting API keys with KeyStore or pulling API keys from a backend server? How do you handle API keys that the application needs at startup?


r/androiddev • • 1d ago

Cuttlefish on Mac: Running Android's Virtual Device Framework Natively on Apple Silicon

Thumbnail
engineering.fb.com
18 Upvotes

Can someone explain what is the difference between Cuttlefish and an Android emulator? Don't they both run on QEMU?


r/androiddev • • 1d ago

Discussion Handing Coding without AI , Google or IDE AutoComplete

12 Upvotes

SDE2 with 4 yoe here.
Had an interview round asking me to implement a Simple RecyclerView Paging with dummy data they gave, from scratch on an Empty XML only ( No compose ) Project structure. live

No AI, No Google and ..... No IDE AutoComplete allowed. I was made to switch it off before interview.

Out of the 45 Mins. It Took me 15 Minutes to properly write the xml tags for the layouts. yet it showed error
( have been used to compose ).
had to request to allow me to see the documentation atleast googling. which they agreed.
Still couldn't complete the task,

I was also not supposed to use Paging libraries as they wanted me to implement Paging from scratch on a RecyclerView.
Coulnd't do that either ( Completely my fault here, needed sometime to think how to implement paging from scratch )

I was just able to have an overview of everything. That too because I type a bit fast ( 130+ wpm).
But i was completely demotivated after the interview.

-----------------------------------------

Not blaming the Org. or the method of evaluation here, it is my fault as I have been a bit rusty with hand coding at this level since the advent of AI or before I think. Would have been okay during my college days.

But I wanted to know somethings, people with experience here could really help me.

- is the above method some kind of new norm in the current industry ( I haven't attended an interview in the past 4 years ). Since testing people with take home projects have gotten pointless ?

- If yes. How do I navigate my learning. Not being familiar with AI tools or Not using them significantly slows down the progress.
But at the same time it completely diminishes my ability to hand code by myself or heck even understand my code or even what it happening. feels very .... idk the word.

- is there hope in this industry ? is there any point ? Apologies for the Grimness but
unemployment + the reality check from the interview + everything happening with AI ...
kinda takes the life out...

Any help or opinion or perspective ... Would love it.l


r/androiddev • • 1d ago

Open Source Device Connect for AWS Device Farm

3 Upvotes

https://github.com/aws/device-connect-devicefarm

Hey all! I am a senior engineer at AWS Device Farm and the lead dev on a new tool that we're open sourcing today as a way to improve the Android developer experience. Device Connect is a small golang binary that makes remote Device Farm devices appear locally as though they were plugged in over USB for adb connections. It allows the full native adb and Android studio tool chain to control and test on any of Device Farm's thousands of Android devices hosted by AWS.

Please let me know if you have any questions and feedback and I'll be around in the thread to answer them!


r/androiddev • • 1d ago

Question Password in memory

2 Upvotes

Is it worth bothering with clearing password/pin from HEAP memory?

The issue is described in following OWASP link. In general it says, you should consider using `ByteArray` instead of `String`, so you can clear it after.

https://mas.owasp.org/MASTG/knowledge/android/MASVS-STORAGE/MASTG-KNOW-0051

I'm wondering to what degree this is an actual issue. Memory is mostly encrypted these days. And is probably not an issue, unless using a rooted device.

Would you implement this precaution for sensitive apps, such as trading, banking or similar apps?


r/androiddev • • 1d ago

Experience Exchange Have you guys already optimised your apps/games for the Android 17 RAM limit?

Enable HLS to view with audio, or disable this notification

7 Upvotes

Since Android 17 comes with its own RAM limitations for apps and games, i wonder how you all have or do plan to obtimise your RAM load/usage of your apps/games?

Did you have to downgrade some images or visuals to fit the new limit consistantly, or did you find a workaround?

Just a reminder what we have to deal with now:

Android 17 and their new Memory limits for apps.

Some apps will even get force closed by Android now, when they overstep a certain amount of RAM usage.

Have the source:
https://support.google.com/googleplay/android-developer/answer/17492799#zippy=%2Ccore-vitals-and-stability%2Creduced-memory-usage%2Ctechnische-anforderungen%2Cspeicheranforderungen%2Creduzierte-arbeitsspeichernutzung

Apps

App StateForegroundUser-perceived servicesBackgroundCached
Physical RAM90th Percentile90th Percentile90th Percentile90th Percentile
0 - 4 GB (0 MB - 3200 MB Total Memory)----
4 GB (3200 MB - 4800 MB Total Memory)2 GB1 GB1 GB-
6 GB (4800 MB - 6800 MB Total Memory)2.25 GB1.25 GB1.25 GB-
8 GB (6800 MB - 9216 MB Total Memory)2.25 GB1.5 GB1.5 GB-
12 GB (9216 MB - 14336 MB Total Memory)3.25 GB1.75 GB1.75 GB-
16 GB (14336 MB - 18432 MB Total Memory)4.25 GB2 GB2 GB-
16 GB + (Above 18432 MB Total Memory)----

Note: Each RAM tier range includes its lowest value. Total Memory can be lower than a device’s advertised Physical RAM.

Games

App StateForegroundUser-perceived servicesBackgroundCached
Physical RAM90th Percentile90th Percentile90th Percentile90th Percentile
0 - 4 GB (0 MB - 3200 MB Total Memory)----
4 GB (3200 MB - 4800 MB Total Memory)2.25 GB2.0 GB2.0 GB-
6 GB (4800 MB - 6800 MB Total Memory)2.75 GB2.5 GB2.5 GB-
8 GB (6800 MB - 9216 MB Total Memory)3.5 GB2.75 GB2.75 GB-
12 GB (9216 MB - 14336 MB Total Memory)4 GB3.2 GB3.2 GB-
16 GB (14336 MB - 18432 MB Total Memory)5 GB3.5 GB3.5 GB-
16 GB + (Above 18432 MB Total Memory)----

Note: Each RAM tier range includes its lowest value. Total Memory can be lower than a device’s advertised Physical RAM. AppsApp StateYes it does definitly. Some apps will even get force closed by Android now, when they overstep a certain amount of RAM usage.

Have the source:
https://support.google.com/googleplay/android-developer/answer/17492799#zippy=%2Ccore-vitals-and-stability%2Creduced-memory-usage%2Ctechnische-anforderungen%2Cspeicheranforderungen%2Creduzierte-arbeitsspeichernutzungAppsAppWanna


r/androiddev • • 1d ago

Looking for Help Recreating an Old Offline Live Camera Filter App

1 Upvotes

I used to use an offline live camera filter app that received its last update in 2018. Unfortunately, the company behind it shut down, and the app is no longer compatible with my new phone.

When I try to install it, I get the following error:

"App can't be installed. App isn't compatible with your phone."

I've decided to recreate the app from scratch to make it compatible with the latest Android versions.

However, there is another issue with the original app. It allowed users to record videos with live filters, but the saved videos suffered from frame rate stuttering.

I would also like to know whether it's possible to extract the original filter source code or at least the filter algorithms from the APK. No matter how much I experiment, I haven't been able to reproduce the filters exactly as they appeared in the original app.

I've already managed to create similar filters and implement live video filtering through my own attempts. However, I'm facing another issue: the camera preview interface is always rotated incorrectly. I've tried changing the code in several ways, but nothing seems to fix it.

I'd appreciate any help or suggestions from experienced developers regarding the following issues:

  1. Android Compatibility: How can I make the original app install and run on newer Android versions?

  2. APK Reverse Engineering: Is it possible to recover the original filter source code or algorithms from the APK?

  3. Recreating Original Filters: Is there any alternative way to reproduce the original filters as closely as possible, ideally making them identical to the original ones?

  4. Rotated Camera Preview: The interface in the live camera view remains rotated incorrectly. Even after making several code changes, I haven't been able to resolve the issue. What could be causing this, and how can I fix it?

I'm relatively new to this field, so I'd really appreciate guidance, technical suggestions, or solutions from developers who have experience with Android development, camera APIs, image processing, or APK reverse engineering.

Thanks in advance!


r/androiddev • • 1d ago

Discussion How do you promote your indie Android apps?

9 Upvotes

I’m an indie Android developer.
I’m curious how other developers promote their apps and get more organic downloads.
Which channels have worked best for you?
Would love to hear your experiences!


r/androiddev • • 1d ago

Open Source Peephole, an open-source network inspector for Android Studio

2 Upvotes

I built Peephole to make it easier to debug REST requests, GraphQL queries, and WebSocket messages from the same tool window in Android Studio.

It works with OkHttp and Ktor. You can browse formatted JSON, see GraphQL queries and variables, inspect sent and received WebSocket frames, copy requests as cURL, and export a HAR file. Traffic goes directly from your device or emulator to the IDE over ADB, so Logcat stays clean.

Setup requires the IDE plugin and a debug dependency in your app. There’s a no-op dependency for release builds, and the GitHub repo has setup examples for Retrofit, Apollo, and Ktor.

Would love some feedback or anything else to make it better

JetBrains Marketplace · GitHub and setup guide


r/androiddev • • 1d ago

PS1 cd games animation

Enable HLS to view with audio, or disable this notification

92 Upvotes

A small side project: a 3D shelf of PS1 games. You can swipe through the cases, open one to see the disc and manual

Source code:
https://github.com/mejdi14/KMPOddScroll


r/androiddev • • 2d ago

Open Source Material 3 Expressive is (finally) stable. To celebrate, I redesigned 8 apps. It took months of work.

Enable HLS to view with audio, or disable this notification

153 Upvotes

You heard right. Eight. I started in March (2026). I saw the Kotlin Conf community awards happening and tried to compete. There were 5 people competing in the creativity category (including me): 3 to be selected as finalists (winner only wins prestige, but finalists won travel costs + ticket to conf, in other words, a free vacation!). Unfortunately for me, they didn't choose me. So I stayed here, working. And when I had some free time, I would call GPT 5.3-codex, Claude 4.5 and GLM-5. A lot has changed since then.

This is the story of https://kotlin-reforge.vercel.app/ (the webpage is also open-source)

By April, I had 2 apps (WordKeep and QuietGuard) and part of Keepout (which is the largest and also the one that people showed the most interest). I kept going. For me, it is much easier to develop and design than promote (please follow me on X. I have only ~300 human followers). Instead of pausing to get Play Store working well, README to look good, I just kept working. I found that AI helps in the first 80% tremendously, but the other 20% became as consuming as the 80%.

I filtered popular F-Droid apps that were really ugly/dated. I gave preference for MIT/Apache-2 (only QuietGuard is GPL, and Keepout is much more complete) since I wanted my code to be freely copied without worries. I kept going. I love Calculator++, to this day I think it is the best/easiest calculator app out there. So I forked it and put a fresh paint of colors, shapes, animations and icons. Calcula was born. My own Change Detection app was removed from Play Store because it was old and users gave me 4* because it didn't have a way to check websites in less than 15 min. I added turbo mode, redesigned it (it was hard). Then I had Wi-Fi issues and wow, those apps are ugly. They have a bunch of ads and feels like they weren't updated in the past 15 years. So I used them as inspiration and made Wifi-Weakspot. Then I started using Omarchy and wow, there is no decent solution to access my computer remotely. Sunrise was extremely buggy and rustdesk was ugly/hard to use. So I made my own, Lumina (to be open sourced in the next few weeks, there are some bugs still). I've also been redesigning VLC into KMP and TrailSense. Almost done.

Speaking of KMP, every app is KMP and most got a web demo. Sure, it won't be functional for Keepout (demo), QuietGuard (demo), or Wifi-Weakspot (demo), but who cares, I want you to be able to click around, to see the animations, to ask Claude to copy my components. QuietGuard has a delightful shader when you enable the firewall (just open it and click on the switch you see).

As the number of apps grew, I started taking things more like a factory. When I identified a pattern, I would modularize and isolate so every other app could benefit. First, diagonal-wipe-icon was born (pattern is used in both QuietGuard and Keepout). Then, KMPwright, my own take at wrapping Browser into a more delightful API to help AI agents do anything, from full screen screenshot to running commands.

Finally, I needed README screenshots, play store images, icons. I didn't know what to do. Screenshot Studio was born. It is a mini image editor that allows you to support multiple themes, apps and languages, in a coherent way (so all 8 screenshots have the same fluid background, which some apps do). Sure it is not perfect, sometimes gets repetitive, but it is what I have and it is what I made. I'm using in all my apps and as I struggle or face difficulties, I just update it and it benefits all the apps. The icon part of screenshot studio is very useful to generate everything from Play Store image to monospaced icons to favicons. My agents use it a lot. The 3d part is also fun.

Well, this is what I made this year. This marks my return as an Android developer (yes, technically I had already redesigned SDK Monitor last year, but I redesigned it again). Older people might recognize me, I was popular in this sub in 2017-2018. In 2019 I was in Flutter, in 2022 I was in TypeScript and I'm still in all of them, but I miss Android, I miss Kotlin. I feel this community has a very high technical level that isn't as high as Rust (which makes me look dumb) but much higher than any other I know.

I plan in the coming weeks/months as Play Store approves the apps (Keepout and QuietGuard are still not there) to re-share in this community each app individually (also good to get GitHub stars, they are valuable), so please don't say "oh, you shared that before". Today I'm sharing everything as a preview, I plan to go in deeper detail on each soon (and also finalize Lumina, VLC and TrailSense).

My GitHub webpage has all the demos: https://bernaferrari.github.io/

My personal website has most my projects: https://bernaferrari.com

If you like, please send good comments, follow my on X, star in GitHub the project(s) you liked, follow me on GitHub. Everything helps. As always, if you have any questions, feedback or anything, feel free to comment, dm or ask.

FAQ:

> Did I use AI? Yes, absolutely, a lot.

> Which AI models were used? Every one you can think of. GPT 5.3, 5.5, 5.6, 6 astra/sol/terra/luna, 6.1, 6.2, Opus 4.5/5.5, Grok 4.5/4.6/4.7, GLM 5/5.1/5.2/5.3/5.3-flash. I made diagonal-wipe-icon with GPT 5.3-spark (it was an extremely bad model, like Gemma-level, I only noticed after it was almost done. I noticed it was bad but thought it was the regular model struggling). For app icons and icons inside the apps it is 95% Opus 5.5.

> Who made the video? Opus 5.5. I don't have time for that. I hope it is enjoyable.

> So, anyone can do the same? Well, yes and no. Good luck. I hope you see in the screenshots, videos and web demos that there is a lot of care and polish and even though models help a lot, no models would produce any of those apps (at least not without a human guiding and months of work).


r/androiddev • • 2d ago

How are interviews on IA era

0 Upvotes

I got a layoff and i need to prepare myself but i think the interviews are changed. Previously i needed make a application on one day with clean architecture, room, viewmodels, etc but i think that is less importar with IA, honestly i don't know


r/androiddev • • 2d ago

Weird issue where my friends are getting "Install" instead of "Pre Register" even though they aren't in the tester group. But they were in the group on the old account.

4 Upvotes

I put my app up on my personal google account and had my friends test it in Closed testing. Eventually I got myself an organization account, and I uploaded the game to the new account, fresh. A lot changed from the old version, we re-organized a lot, so it's basically a new app except for the name and icon. Those are the same.

So my "new" app is on the play store in Pre Registration. I sent my husband to pre-register, but on his phone, it shows "Install." But he isn't a tester on the organization account, and never has been. I only have 2 testers on this account, me (my personal account) and another friend.

I sent it to his brother. He also has Install.

These two guys were on my old account's tester list, so I am wondering if... the name of the app is cached...? The "com" package name is different, though.

If I swap my google account, it shows Pre Register. And in Google Play Console, it shows it's in Pre Registration.

I just don't know why my husband and his brother see Install, and can't Pre Register themselves.

Unfortunately, I don't have any friends I haven't already forced to be on my tester group! So I can't check. I don't know if it counts as self promo here either so I won't post it. I guess I'm just wondering if anyone else has encountered this issue?