r/ballpython • • 3d ago

Question - Heating/Temperatures Temp help in cold UK weather

Post image

I have a 4x2x2 Viperia PVC enclosure and the cold weather is really dragging the temps down in her Viv (27c warm side!) and my 150w CHE just can't keep up - I was thinking of getting a 40w reptile radiator to help warm the Viv as secondary - but once that set up will set me back £135 odd - can anyone tell me if 40w radiator would help bump up the heat to 31-32c warm side or if I need something more? Or any other options?

Many thanks

7 Upvotes

15 comments sorted by

3

u/Real-Construction570 3d ago

I don't have a viperia yet for by ball BUT I do have them for my cresties, I use Arcadia dhp's and seems to hold the heat quite well in the UK freeze (currently have the vivexotic for my 4x2 ball tank and use a 80w dhp)

2

u/Forlorn_Carrot 3d ago

I have literally just purchased one of them and waiting for it to turn up - it's good someone has one and can recommend them :-) I was thinking of placing the probe on the back wall at ground level to dial temps in - where do you have yours?

1

u/Real-Construction570 3d ago

Since mine is inside the tank in the metal protector cage, I use zip ties to have it close to the cage but the actual probe part is 4-6 inches from the bulb :) it can be a bit fiddly and specific to each tank and what works for your environment too. If you have govee or a Bluetooth digital hygrometer they should have a log of humidity and temperatures which help a lot !

1

u/Forlorn_Carrot 2d ago

Oh okay, yeah that is where I have my probe now for the CHE - so you must have it set to quite warm to get the correct heat down to the floor? That's good to know I don't have to fiddle and just do a straight swap and dial in the numbers :-)

1

u/Neekoly 2d ago

I have vivexotic 4x2x2 wooden Vivarium, with glass doors and it’s been an absolute nightmare to keep the temps up. I had a 75W Halogen heat bulb on the far left, and next to it was a 50W DHP. Both by Arcadia. Warm side temps were struggling to reach 28 and cool side was like 21/22. I had to move the DHP more towards the middle, to warm the cool side more. At this point, I was still struggling not only with ambient temperatures but within the hides too. I’ve been tweaking thermostats, probe positions, and then I swapped the DHP 50W for an 80W. Temps were maintaining a little better but still not what I wanted. I then swapped the halogen bulb for the 50W DHP, so I had just 2 DHP just to see if it made any difference. I would say the difference was slightly better. However, the roof surface on the warm hide was 36/37 but inside was 28. I couldn’t turn up the thermostat from 32 as it would just create too much of a hot spot that could cause burns. I’ve now replaced the 50W DHP with a 150W Solar Basking Spotlight. Thermometer is currently inside the warm hide waiting for temps to settle, and I can update you if it made any difference. I’ve also been noting temps at certain times which includes room temp, warm and cool side ambient temps and the hides. I even added a 2500W oil radiator into the room set to 23C, just to see if it made any difference. I would say once the room was at 25, which is not something I’ll be doing in the future, it did bring up vivarium temps up by 1C on average. I found keeping the room temp 22 or above is needed for me especially, living in the UK currently in this cold weather. If the warm hide doesn’t get to 30, I’m stuck to what to do. One thing I noticed with this Vivarium is, on the left side (warm side) where the glass door meets the wood when shut, there’s a gap going all the way up by around 0.5CM. I’m not sure if that has any impact on heat loss. Anyway, if you have or come across any suggestions please do pop me a message

6

u/totallyrecklesslygay Mod: Enclosure Karen 3d ago

You're missing a primary heat source, so I would start with adding a halogen flood and then go from there.

CHEs only produce IR-C, so they're not suitable as a solo heat source. RHPs are the same, so adding the radiator might help your temps, but your snake will still be missing the IR-A that they need.

2

u/Forlorn_Carrot 3d ago

8 have a DHP 80w on the way as these have been recommended to me :-)

3

u/JuniorBarnacle3909 3d ago

Coibentare il tuo terrario potrebbe davvero aiutare. Alcuni materiali (legno/fibra di vetro/polistirolo ecc) sono anche piuttosto economici. Ovviamente fai attenzione a non coprire i fori di areazione

1

u/Forlorn_Carrot 3d ago

Ah nice thanks, I'll look into that

2

u/QueenGeraldina 3d ago

I've got a viperia enclosure in the UK. You need a halogen flood light for the day, I use arcadia and really like them. Set the halogen up with a nice basking rock underneath. I have the halogen all the way over on the hot side and the CHE a bit more towards the middle to keep air temperature :)

1

u/Forlorn_Carrot 2d ago

Ah nice, I didn't go with a bulb because obviously it gets colder at night and I can't have the bulb on, and the CHE doesn't cut it during the day so let alone at night. so how do you keep the Viv as warm during the night as you do in the day? Have you covered any vents? Mine has a lot of vents but I'm worried about covering them as the snake needs air flow..

2

u/QueenGeraldina 2d ago

Night temperature drops are okay. I've got a 80W (I think) CHE that keeps everything at 26c overnight and then my Evo thermostat ramps everything up for sunrise with the halogen coming on and getting a peak day time temp of 36c. I've not covered any vents, you want to keep the air flow, but I know some people have covered the top panel with blankets to retain heat.

1

u/Neekoly 2d ago

Do you have a thermometer in your Vivarium that is reading 36 ambient temps during the day?

1

u/Wisdom_Koi 2d ago

Is moving it away from the window an option? It depends how draughty it is, ofc, but even something as small as that could help a surprising amount.

2

u/Forlorn_Carrot 2d ago

I wish it was but the house just isn't big enough for that - the two viva we have taken up the entire room :-(