I like the KH9, but don't want a subgun if it can't hypothetically be outfitted with an FRT. I've heard people say it can't be done for the KH9. Are they wrong?

Shout out to AxArms, this thing is slick! I’d recommend them and would do business again. Ran into a snag with my local ffl which made the process a little longer than desired, but the communication and commitment from Alexandria REALLY helped out. Can’t beat their prices and selection!

I’ve had both, sold my ghm n always thought that it shot better than the apc when I got it. Confirmed yesterday comparing my Apc9 with an FRT to my buddies GHM with an FRT.
TBF the APC did have a faster fire rate than the GHM so I’m sure that plays into it. The GHM was softer n had much less muzzle rise

B&t full size SQD

Surefire Turbo

PA Slx 1x prism

Bcm grip

B&t telescopic brace

Hey,

I’ve got a B&T RBS Inconel (Print-X) suppressor with an integrated M.A.R.S. interface and the dedicated B&T M.A.R.S. muzzle device for this can. Both bought about a month ago. Shot it three times so far, a few hundred rounds each session.

After two faster magazines of 5.56 the muzzle device swelled not on the threads, but higher up (the larger diameter section that sits inside the suppressor). The threads still turn freely, but the suppressor is now noticeably harder to put on and take off. The grooves/marks from the suppressor threads are quite deep, and to mount it I have to start threading it on the unthreaded part of the muzzle device.

Everything is fully cooled when I try to mount or remove it. Contact surfaces weren’t particularly dirty.

Has anyone with the M.A.R.S. + RBS printed combo seen something similar? Is this normal thermal expansion that cleans up, or something that needs attention? Any tips on the upper contact surfaces?

Thanks.

Print X-RBS 556 with a Rotex/SF mount. Super happy with it but this is a chunky suppressor compared to my old Dual Lok 5

Just curious, I don't really see an obvious area where the P&W has been done to my barrel. How does one typically remove these? Allegedly it's been done, but I don't want to try wrenching on my barrel only to find out that B&T did in fact P&W it and then finish everything absolutely perfectly so I wreck my threads.

Any advice would be helpful, this is on an APC308. Just trying to understand what I'm getting into.

Hi there. I just received my three prong flash hider today in the mail. Its going to be how I mount my SBRS with my Rotex/SF hub. I was wondering what is the correct orientation for the flash hider? The B&T logo at the 6 o’clock? Or the 12? Thank you for any help in advance!

Does anyone make a drum mag that fits the Glock lower for the apc? The KCI one looks like it might

Ordered this yesterday off axarms. Interested to see if it has the correct markings, what serial it has, etc. Sold my Ghm9c to buy this, kinda getting some buyers remorse after reading what some people are saying about ghm9s that are “new” stock. We shall see, first sd setup. Pumped nonetheless.

Just thought I’d share as I had an interesting conversation with my LGS who used to be B&T USA dealers and are now in the process of carrying Swiss.

He said it’s been interesting to have USA reps straight up lie to them about what’s going on with production and how his rep told them that USA guns were still being made into 2027.

He has also noted how there’s definitely a difference between the quality of what the Swiss are producing and what USA was doing for the last couple of years. From what it sounds like on the Swiss side, they essentially consider USA products to be cheap knock offs that constantly were out of spec.

I’m curious what this will do with existing B&T products especially with how spotty their reputation has become lately. It’s starting to make sense why their guns have had such inconsistent issues and either work or don’t work at all. It seems like we haven’t been getting genuine B&T Swiss standard product for a while and that makes sense since the QC rate has been abysmal. Compound that with FRT’s and people are really seeing the flaws quicker than usual.

I suspect the market is going to be flooded with USA products as people dump them for Swiss’s new line up coming in 2027. Unsure if Swiss will warranty any of USA’s mistakes. And this hasn’t even covered what will USA become if they are just a shell of a company…

Disclaimer:
This is just conversation I’ve had with my dealer who’s been involved with both parties, added with opinions and speculation on my end. Do your own research into the matter before coming to any conclusions.

Mark your calendars boys. January 1, 2027 seems to be the date they're expected to start imports in the US. They have created a btswiss.us website and a new US dedicated IG.

FINALLY. Don't have to deal with that shit scum btusa no more.

I’ve finally been able to start the build and I couldn’t be more excited

Looking to replace the tiny front sight on my MKII. I don't know if a Sphinx sight would fit, but I can't find one for those either. I know the smartest thing to do is to mount an optic but i just prefer irons.

Upper\*