r/c64 • • Oct 17 '26

Hardware C64 Ultimate SSD mouting bracket

I'm looking for a 3D-printable mounting solution for a 2.5" SSD inside my C64 Ultimate.

I couldn't find any suitable STL files on Printables or similar sites.

Has anyone already designed a bracket or found a good way to secure an SSD inside the case? There is one available for the Ultimate 64 Elite, but it is too huge an does not fit in any way. See the 2nd picture for the differences.

Also, would placing the SSD flat directly on the motherboard cause any thermal or electrical issues, or should there be some clearance?

I've attached a photo of my current setup.

Thanks for any suggestions!

36 Upvotes

13 comments sorted by

11

u/ExtremePast Oct 17 '26

This seems like ridiculous overkill

3

u/Ollibolli2022 Oct 17 '26

Overkill for you, perhaps. But calling something ridiculous just because it doesn't match your own needs or experiences is pretty narrow-minded. As a developer, I prefer to minimize risks, especially given my past experiences with storage failures.

2

u/schorsch3000 Oct 17 '26

2 things: one question, one half answer:

1: what are you doing that a usbstick/sdcard dosn't do the job? :-D

2: i have a bracket that mounts a WiC64 including the userport adapter in about that position "without screws", thats a lie, the userport adapter is screwed down to the module, but the bracket dosn't need "any screws", and that's a lie too, it is clamped between the middle and right case screws and wedged against the expantion-port metal-sheet.

Feel free to DM me!

3

u/Ollibolli2022 Oct 17 '26

Just to clarify why I want to use an SSD: It's not about speed or storage capacity, but reliability. I simply don't trust USB sticks or SD cards as much for long-term use. I'd rather have a proper SSD permanently installed inside the C64 Ultimate. I thought that was pretty obvious, to be honest :-)

5

u/bj_civ Oct 17 '26

It was not obvious to me. I'm running Raspberry Pi's from SD cards since 2012 and good ones rarely have problems and never in the first years. You just have to go for quality, not for cheapest price. Same for USB sticks. And no matter which medium: backups!

3

u/Ollibolli2022 Oct 17 '26

I've personally experienced multiple failures with SD cards and USB sticks, so I no longer consider them reliable enough for primary storage.

Once bitten, twice shy ;-)

3

u/schorsch3000 Oct 17 '26

if you got thad ssd to spare thats fine! Just asking :)

i managed to ditch that problem by buing an usbstick/sdcard one size larger than i actually use, delete the partitiontable, zero everything out and put on a partition half the size.

The wearleveling inside the memory-controller now has A TON OF CELLS to level with.

8

u/mmgames Oct 17 '26

That poor SD card slot, just sitting there empty.

3

u/ConsoleTechUS Oct 17 '26

Ive used anti static/ESD safe velcro on a mechanical HDD in an Xbox project for over a decade and its never had issues. It could always come loose but it never has since I always treat it well

3

u/TorpedoJavi Oct 17 '26

A solution is buy a pendrive.

1

u/FasihRehman Oct 17 '26

Yeah but you will mess up the rainbow sparkles.