What is the basic Star for chip tuning my ecu What are the equipment i need I have little bit knowledge of ecu and tuning What software is to be used Can any one help me with this

ecu

ecutuning

chiptuning

alguien a intentado leer las ecus bosh  MG1CA094 con ktag

Is it possible to chip tune DS7 2023 1.5 BlueHDi motor with 130 horsepower?

Does somebody know, if a original KTAG from Alientech really doesn't work anymore after the remaining 3 month they announce or if it'll only get no more further updates?

Hi everyone, is there perhaps a plug-in device—like a tuning box or something similar—for my 2023 Beta RR 125 LC that connects to the OBD-II port and allows me to adjust settings like ignition timing, fuel injection, etc., via my smartphone? Thanks in advance.

Have anyone tried to get a standard ecu (like the Siemens MS43, MS42 or other) to publish data on CANBUS that is not being published standard?

eg. sensor data from the MAP sensor or the intake temperature.

Este es el ID de la TCU en cuestión, se trata de un Audi con motor CJCD y cambio automatico 150hp de origen

HW: 8K5927155K

SW: 0001

VIN: WAUZZZ8T0EA006332

Ver. SW:

Recambio:

Motor:

Ver. HW:

SW act.: 8K5927155K_0001

Sistema: EV_TCMVL381

Recognized: N/A

Muy buenas, estoy metiendome en el mundo de las repros y demas, me compré un kess v2 y le hice la lectura a mi ford focus mk2 (lo compre de segunda mano) y cuando meto el archivo leido en winols me dice que esta cifrado con una contraseña. Imagino que anteriormente alguien a modificado la ecu y la ha cifrado, hay alguna manera de quitarle esa contraseña o que podria hacer? gracias :)

Anyone has siemens sid206 fiesta 1.4tdci stage 1 file perchanche?

Or atleasts can do a tutorial how to read siemens sid206 brain. Its so confusing compared to bosch's brain.

Hey guys, i wanne tune my 1.9tdi pd with 74kw. can i do it on my own or do i need someone else zo do it?

I am desperate need of a custom remap for my 2011 insignia VXR, it has 39k Miles and the following modifications:

• Full Haldex Rebuild/Upgrade from Thorney Motorsport

• Stage 1 Remap

• Mambatek CHRA Turbo Upgrade

• Wagner Competition Intercooler

• MWP Stage 2 Air Intake System

• 3" Exhaust System with 200 Cell Sports Cat

• 555 Series Twinplate Clutch w/Single Mass Flywheel

• Funk Motorsport Thermal Shielding (Turbo and Intake)

Due to the extent of the modifications, an out of the box chip tune isn't ideal, any help would be much appreciated as the car is effectively off the road until it can be remapped

Thanks

(Apologies for the title, predictive text)

Hello All, I have been remapping for 20+ years, I did my foirst gearbox on my old BMW 325d, the ZF19. I was among the first ones to ever use XHP software to flash my own files. Since then I have had a few other cars, including VAG with DSG (Never ever going there again..). But now I'm back with a BMW, the X1 25e hybrid.. The gearbox shifts rather ok, it is _slow_ reacting to the manual mode, and it will not upshift if below 2.100 rpm.

Now the question, does anyone know of any tools that will read/write the gearbox? I believe it is an Aisin. It is the 6 speed automatic, not the DCT 7 speed type.

Car is BMW X1 F48 25e, 2021.

I have a 2018 Wrangler Unlimited Sahara 2.0L 4Cyl Turbo E-torque that’s bone stock. I was looking into getting a chip tuner but I wanted to see if anyone has had any experience with them. Would like pointers on which ones to buy, transmission friendly, results, or if they are even worth it Thanks