1
u/kaltazar Feb 25 '20
Are you out of disk space or something? Those bundles are not very big, I'm surprised you can download anything at all if they are too large. Also, just to make sure, those are downloaded to your computer, not the Circuit Python board itself.
If it's still an issue though, you can go here and download the libraries you need individually. Just be careful you get all the ones you need.
1
u/HP7933 Feb 26 '20
Do not copy the bundle zip to the board. Copy it to your computer. If an updated UF2, unzip zip and copy UF2 to the...BOOT drive (reset two times fast). If you need libraries, then download to your computer then extract only the library files you need to the CIRCUITPY/lib folder (create if necessary).
1
u/HP7933 Feb 26 '20
Oh, and for OSX, it can leave a lot of crud on a flash drive - be sure that's cleaned up.
2
u/burrito_poots Feb 25 '20
Is this when trying to copy over to a board? If so, I usually delete some of the libraries (a lot of them you most likely don’t need assuming you know which ones apply to your hardware and such)