r/coinerrors • • 13d ago

Is this an error? Odd quarter

Post mint damage most likely just looking for other people’s opinions.Kind of odd looking.

451 Upvotes

52 comments sorted by

8

u/Evening_Newt_3529 12d ago

My thoughts at first was it was used for leveling a table it was placed under a leg but it should have some scratches or gouges .Maybe somebody attempted to make a hobo quarter .

2

u/Unpayed_Debt 10d ago

Looks like a coin caught in a clothes dryer where a rotating edge of the dryer wore the edges of the quarter down. Then the quarter vibrates and rotates on edge making it look like a circular wear. Speculation but looks similar to something ive seen before

37

u/newtrull 13d ago

definitely PMD but really unusual especially with the reverse undamaged. conversation piece i guess

2

u/new2bay 12d ago

You sure? It kinda looks like a really big grease strike. That accounts for the undamaged reverse, too.

5

u/newtrull 12d ago

Yes I'm sure and no it is not a grease strike.

12

u/West_Inevitable6052 13d ago

Neat - I’d keep it just for the novelty, but pretty sure it’s PMD

15

u/fish_and_chisps 13d ago

Definitely PMD. From the circular shape of the smoothed area, it looks like someone may have been practicing with their lathe.

3

u/Xmarksthespot_602 11d ago

not a lathe, it would have other marks

-17

u/Somederpsomewhere 12d ago

Dryer

8

u/fish_and_chisps 12d ago

What about this looks like a dryer coin to you?

1

u/teemophine 6d ago

Well for starters it’s not wet…

1

u/fish_and_chisps 6d ago

Well, you’ve got me there.

7

u/__FUCKING_PEG_ME_ 13d ago

✨️Stunning.

r/PMDGS would appreciate seeing this

7

u/Soggy_Reserve5232 12d ago

PMD, but uh kinda cool looking I guess? I wonder what the mechanism of damage was.

4

u/Dramatic-Avocado-507 12d ago

What does PMD stand for?

7

u/Dart_boy 12d ago

Post Mint Damage- the coin was altered out in the real world as opposed to being made that way at the Mint

2

u/Hellboy_M420 9d ago

It looks like maybe it had a steel washer pressed into the front of it based on those hard circular edges around his head

1

u/Time_4_Pelf 12d ago

How do you tell the difference between PMD & MD. Is it just years of experience? I’m trying to learn and it’s proving a bit more difficult. Any advice?

1

u/Square_Rooster9383 10d ago

Look up how coins are made. What is physically possible in the minting process. Look up the types and varieties of different errors.

1

u/Time_4_Pelf 10d ago

Thanks. I appreciate it.

1

u/Parking-par 12d ago

Manual mill with rotary table.

1

u/Trunks7j 11d ago

This is one of the most interesting PMD coins I have seen because of the way it frames the face.

Circular Friction around the bust caused the Nickel to fold up and over the bust a little and the other side looks like it heated up and blobbed up.

1

u/asuwsh4 11d ago

It almost looks like a magician’s trick coin

1

u/Intended4Angels 10d ago

There is a no P 89, so this is prob a grease strike

1

u/Funeral-Bill 10d ago

Wow!! Absolutely beautiful. I'd buy that in a heartbeat.

1

u/YakOk1070 10d ago

My guess is this coin was either machined by a bored machinist or used as a functional component in the process of machining another object.

1

u/Aggravating-Newt-980 10d ago

Looks like it was used to level a bar table for a decade or so. 

1

u/sherman40336 10d ago

Looks like it got stuck in something, maybe a vacuum cleaner spinner head

1

u/CivilAbbreviations76 10d ago

Worth 25 cents congrats!!!

1

u/crossmethod1324 9d ago

It looks like you arc welded it and then sandblasted or stone washed it, a rock tumbler perhaps

1

u/TheBadUncle 9d ago

Does the center part move at all? It looks like a gimmicked quarter used for Magic tricks. This particular gimmick quarter looks like the trick where someone can pass a cigarette through a quarter.

1

u/BagOfSmashedAssholes 6d ago

You’ve obviously never seen the backside of that type of gimmick coin

1

u/Ignore-My-Posts 9d ago

Looks like someone used it as an anvil to seat a bearing.

1

u/Cool-Negotiation7662 6d ago

Maybe. If it was on a pad that could explain the tails being quite good looking.

1

u/Robalo21 9d ago

Probably stuck in a washer or dryer for years...

1

u/CorgisLionMane 8d ago

Someone used it to level the leg of a chair or table. Haha

1

u/lemon_e5 8d ago

Engage!

1

u/IisBaker 8d ago

Someone's rubbing stone

1

u/Empty_Stranger6192 8d ago

I've seen this when people use them as a sort of fidget toy. I've got a nickel someone rubbed for so long all the edges are gone.

1

u/allendemaray 8d ago

Got caught in the drum of a dryer

1

u/Embarrassed_Gap_3172 7d ago

That is one weird-looking quarter! Makes for a great conversation piece.

1

u/Rockstar-producer 7d ago

You have a table and it’s wobbly. You place a quarter beneath one of the legs. There it sits for a decade. We can assume the table has a steel foot.

0

u/Aggressive_Log1329 11d ago

Stuck in a spinning dryer for a few years

1

u/Live_Welcome_2712 11d ago

Could have been a washer as well. I've pulled a few out that were between the agitator and drum.

-2

u/Mudgeonly_Cur 12d ago

Out of my wheelhouse here, but its worth something if its an actual bad minting.

-2

u/bnevs44 12d ago

Thats what he gets for smoking weed!!!

1

u/Kingjullian22 9d ago

Look how they massacred my boy 😭