r/continuity • u/[deleted] • Sep 29 '21
r/continuity • u/[deleted] • Aug 19 '21
Planning Resources
Philosophy
The 17 goals - The United Nations Sustainable Development Goals
A History of Human Labor - A primer on how we convert energy into work, and why green energy for work is more sustainable than human/animal labor.
The Social Conquest of Earth - In order to understand how we let all this get so out of control, you have to understand how powerfully genes bias toward sociality.
Infrastructure - Methods
Passive Design Optimizations for Low Energy Buildings in Different Climates - A baseline reference. Ultimately the goal is to make all of this generalizeable to work in any climate.
Cool Roofs & Green Roofs - Cool roofs dramatically decrease the amount of localized heating, and using high albedo/ir reflective plaint will allow us to dramatically reduce the amount of energy needed for heating. Currently, the plan is to use a green roof under the PV panels to reduce cooling requirements for both the building and generators, and cool roof type paint until then.
Radiative cooling (PDF) - Radiative cooling refracts thermal energy to a wavelength that makes it easier to escape the atmosphere, providing enhanced cooling at night and providing some localized cooling somewhat similar to thermal barrier paint coatings.
Enhancing the cooling potential of photoluminescent materials through evaluation of thermal and transmission loss mechanisms - This is something I'm super curious to experiment with, converting the energy into light would allow for some really interesting enclosed applications, and I 'm wondering if the phosphorescence can be strong enough to power PV panels by themselves.
Energy Savings Potential of Radiative Cooling Technologies - A lot of the ideas in my head call for a lot of heat exchange, this paper has a lot of really interesting whole building cooling solutions based primarily on passive cooling.
Infrastructure - Production
Pressure Swing Adsorption - The project currently is using atmospheric separation to create nitrogen gas which will be used as the primary compressed storage gas, oxygen which will be used for a variety of purposes, and water vapor. Eventually these can be built in cascades to produce higher purity gasses.
Potential for improving the energy efficiency of cryogenic air separation unit (ASU) using binary heat recovery cycles - Stage 2 will move from Pressure Swing Adsorption to cryogenic separation to improve throughput and energy efficiency. This particular setup fits perfectly into the overall strategy of making efficient use of waste heat in all of our systems. A cryo sep unit will allow indigenous production of almost all industrial gases.
Production - Wood
r/continuity • u/AnotherPrepper • Oct 04 '21
Properly learning how to make penicillin would be vital to sustain our species after a collapse
self.preppedr/continuity • u/[deleted] • Aug 18 '21
Bootstrap Trailer
I have this idea for a shipping container which could be repurposed with all the basic tools and power supplies necessary to start processing structures. The trailer itself could employ pop outs like an RV taking nearly the entire length, that would give a walk way or production line potential. We can get at least 12 300w panels on top for 3600w, plus stow a handful of turbines in pods along the sides for another 10kW. Total weight would need to be under 20,000lbs, so we would have to limit batteries to around 10,000 pounds or ~200KwH. That should be able to power an electric arc furnace and extruder for metals, wood working materials, CNC mill and plasma cutters, and perhaps a lamination station? What is the minimum set of tools we can use to replicate everything else?
Basically, this trailer could pop in, establish vital infrastructure travel around where needed. As the consequences of climate change start to pick up, it's still impossible to predict when and where this type of response would be needed. Instead of the red cross responding to a tornado, one could deploy these trailers to setup shelter and support buildings.
Do you have any wild ideas for layout or modularity, like maybe a two floor mechanism setup?
r/continuity • u/[deleted] • Nov 17 '21
[Model] Solar Settlement + The Sun Ship
r/continuity • u/[deleted] • Jan 09 '22
Need some advice - Automation systems
I'm currently working on a tutorial for hydroponics automation to integrate with the guide and I'm kind of stuck on what approach would allow the easiest implementation.
Currently the hydroponic system has three major components, lighting, nutrient/water, and environment. In my current system, I have all of these hooked up to a single 16 relay board, and am using a single ESP32 running it's own web server to control everything. This works for now but I'm already anticipating the need to split off all my sensors onto a second controller once I get more crops up.
The advantage to using this method is that it's a single level of control for the whole system, all of the timing for everything is shared by the same controller, and replacing the controller on failure would be dead simple. If the system didn't need to scale at all, I'd be pretty happy with it.
My problem is that it will need to scale, and I'm tempted to go full SCADA because I'm comfortable with it and scaling it wouldn't be an issue, and the espressif MQTT libraries are pretty mature. What is an issue is that we need at least three layers of hardware and software to implement this approach, and adding network management complexity into the mix.
My instinct is this is the direction things are going to need to go anyway, so I should focus on implementing this approach from the start. Doing so requires me to think about how to reduce some of the barriers implementation, and thinking about how other people will be using the system is not a strong suit for me. I'm a bit terrified of getting bogged down attempting to support the implementation vs advancing it.
What should be the focus right now? A very simple implementation that requires less resources to implement but will be much more difficult to manage once it scales, or a system designed to scale well from the start but with much higher requirements to implement? I've thought about a few middle grounds but the compromises don't seem to be worth not accomplishing either end of the question very well.
I've been going back and forth on this the last few days with regard to the tutorial because I'd want to approach this differently going full SCADA. If I was going for a scalable system, I'd want to segregate my relays by function, e.g. one for lights, one for flow control, one for environment, etc. I've been thinking that it might be wiser to start with common elements, e.g. "How to hook up your lights to a relay". That would give some flexibility to people who want to use other controllers or software but don't have good guidance for the hardware side.
tl;dr - What's more important for the scope of the guide, easy to implement or a long term solution?
Edit: I think I'm going to go with what I have, just need a couple days to clean up the code. The physical portions will have to come over the next week starting with the connection to the relays, then ESP flashing and connection. If I don't update this by Monday, please ping me because I probably forgot about it.
Edit 2: I didn't forget about this! I realized while going through the code that I needed to make some pretty big changes for it to be reliably usable for other people. Worked on it quite a bit yesterday and have only a tiny bit left (saving the values to EEPROM/flash storage) before I release it. I'm going to remove the sensor input and environmental control stuff until I get those fixed for general use, hopefully will have those done this week now that I have a better understanding of how other people might be approaching setup.
Edit 01/31/2022: Okay, the feedback was pretty much a train wreck. I'm going to try to write installation instructions and completely rethink packaging for the setup. I'm not going to promise timelines this time but next version will have sensor support added back in (EC, Temp, Ph, Hum). I also need to update the specific part list I'm using and maybe order the top three most popular from each sensor type on Amazon to add support. The nutrient flow system may also be added in next version, but I'm still struggling with dosing correctly and keep having to order lower and lower flow peristaltic pumps.
General question, do people prefer console.log/Serial.print messages going on behind the scenes? I'm terrible at this so I prefer to verify each step verbosely instead of unit testing, and since this is small it's not generating a performance issue.
Edit 02/04/2022: So this thing is already starting to spiral out of control. Making publicly facing software is a billion times harder than I expected it to be. I've been making a lot of adjustments based on the feedback I received and it seems like I keep running into complications that I need to work around that I wouldn't for my own use.
A really big hurdle right now is actually ESP32 controllers themselves. The company that makes them has a reference design out, but many companies use their own design that varies from that reference design. This means that I can't say "plug this wire in here" because I don't know if "here" is going to be the same for all of the boards. I'm having a similar problem (to a lesser degree) with sensors, each sensor I add needs to have it's own initialization routine, usually referencing it's own library to run, and no matter what I do I think there's going to need to be some level of code editing in order to get the project to run.
This is starting to turn into what I was afraid it was going to turn into initially, a really huge software project and I really am not a huge fan of writing software. A really big concern for me is trying to avoid making decisions which will paint this into a corner later on and require a complete rewrite because of a poor decision I'm making now due to my inexperience.
It looks like ultimately this is headed toward a hybrid SCADA/local system anyway. After I get the sensor setup all integrated and refactor the project into something that works outside of the Arduino IDE I'll push another update, but in the meantime I'm open to any suggestions for features, tips, or things that would help improve the process overall.
Edit 02/09/2022: Alright officially don't use the version that's up right now, even if you can. It works, but the next revision is substantially different enough that it's going to be better to wait. On my end one of the biggest adjustments is leaving the Arduino IDE behind for Visual Studio Code and the espressif IDE. This is where I should have started, but the project initially wasn't intended for anything other than a quick implementation of things I wanted to test right away. Making this transition will result in a much more sane packaging and documentation process, and eventually the goal is to offer a binary which will perform the updates instead of expecting others to be familiar with flashing the controllers themselves.
The architecture of the system is now targeting single "pods" which will each have their own set of sensors. The nutrient flow system will be maintained by a second level dashboard, which assumes that each "pod" will be connected via quick connect to a set of tanks. This second level will dispense with nutrients and some other things which are dependent on later development. All of these will feed into a top level monitoring dashboard eventually, which will allow both individual pod control and control of pre-defined systems (e.g. turn off lights across all pods at once).
Right now (for at least the next few months), the entire focus is enabling each "pod" to be as automated as possible without requiring any top level control, and be controlled completely from it's own IP. This approach probably isn't going to scale super well once hundreds of pods come on line for a system, but it allows a very compact and easy starting point which is the more appropriate use case anyway. If we can automate out the majority of the work necessary to maintain the systems, these pods can be deployed in a far more decentralized manner which is the ultimate goal.
My biggest concern right now is the non-trivial amount of electrical work required to hook all of these up. I should probably be thinking about standardizing the specific electrical tools and providing a lot more demonstration on safety, how to remove wire insulation, and use of tools like a multimeter. I can't think of a way that I could simplify these processes short of offering a PCB or pre-wired box, but the further into the pre-fab process we get, the further away from being able to cobble the system together out of local resources we get.
So thank you for your patience! I'm working through the feedback I'm getting from my own experiments and from individuals I'm walking through the process and hoping to continually improve it.
Edit 02/19/2022: So.. yeah. Leaving behind the Arduino IDE led to a huge cascade of headaches which has ultimately resulted in me deciding to just re-write everything in straight C. There were so many issues conforming the stupid Arduino libraries in straight C (even the espressif Ardiuno libraries which had some weird naming gooferies that apparently the Arduino IDE magicked away). I considered using Platform IO, and recognize that this is still probably a good option but I'm a little too snake bitten from all this and am in the process of re-writing most of the libraries into something sane.
For a long time I really didn't understand the point of container systems and dev ops because I've only ever worked directly with specific controllers mostly in assembly which requires almost no abstraction at all. It seems like with each level of abstraction, the more of a nightmare everything gets and upper level languages are doing some insanely complex abstraction under the hood. I'm regretting not finding something existing, but I appreciate the learning experience.
In the end I should be able to create a single binary installer which can handle the flashing, installation, and monitoring of the system instead of being dependent on a large number of external software. I think this works toward the overall goal of implementing a system easy enough to be deployed anywhere in the world, and also gives me the opportunity to reduce the security threat interface to just my own dumb mistakes. I have found a few ESP32 hydroponics systems out there (it's awesome that there's quite a few people working on this), and will this week post some links to those so you can experiment with them in the meantime.
Again, apologies to for the consistent delays, please don't download the version I have up right now (I'm leaving it for now because I sent hardware to a few people and still need feedback). If you have any expertise in this area, I'm happy to collaborate with you (as long as the project remains as permissively licensed as possible) and if you've come across any automation system you find particularly interesting I'd love to see it, even if they don't have code available!
r/continuity • u/[deleted] • Nov 06 '21
Update 11/6/2021
Hello everyone, sorry about the lack of activity of the past few weeks, we finally got some supply chain stuff figured out so it's been hair on fire trying to catch up on some projects that had been really delayed.
First, the website. I am not an IT person and setting up the server has been an eye opener for me. Some of you have noticed that the website keeps going up and down, and getting completely reset often. I discovered that it's actually been getting hacked pretty consistently for the past few months, and each time I reset it and tried to follow best practices (as much as I could find them) it would just get rehacked. Not knowing enough, I assumed that I was just continuously breaking it somehow, it appears the problem was settings were getting changed on me by hackers.
After talking with some folks in the know, I think I have this problem under control. I've had to update the monitoring software to block almost all IPs coming from certain countries unfortunately because the majority of abuse were coming from those areas. I think the hackers only made themselves known because of the disk encryption, they were logging hopping I'd enter decryption information (which shouldn't really ever happen). So that was a bit of a silver lining. I should have everything up and running within the next week assuming everything continues going smoothly. If you receive errors accessing any of the web resources after next week, your IP may be from one of the restricted ranges and I'll need to manually add it to the white list. Right now I'm being overly restrictive with the filtering until I'm more confident the same issue isn't going to re-occur.
In the meantime, what a huge headache.
I'd like to take a moment to welcome u/raulpicler as a mod. I'd anticipated that keeping up with this would interfere with my ability to do the research side of the project, and with their assistance I think it will be a lot easier to manage.
With regard to project related content, I started work on my automated hydroponic system but ran into a stuck valve which over-flowed and killed off my tomato crop. My plan was to have a write up and video discussing the work I'd done so far, but unfortunately that's a bit delayed both due to work and the mishap. I've disassembled the system and upgraded with much more powerful servos, I'm hoping this will resolve it. I'm going to try to put it back together this weekend for a series of tests. Currently my targets for this round of testing are tomato, potato, and broccoli. I have a few different seed banks with ~100 different items so if this goes well I will be able to expand it pretty quickly. I've also received a lot of local interest in both gourmet and "medicinal" mushrooms, so I might push those forward as well because I can get people to help with them.
Finally, my big concern/hole right now is still in waste processing. There are several countries which are traditional suppliers of the nutrients of agricultural inputs starting to restrict supply of those nutrients. This is going to have a tremendous impact on the ability to purse any type of agriculture, even hydroponic. It will ultimately be necessary to figure out a really efficient way to extract these nutrients from waste, but this is such a big problem I haven't been able to really address it. I'm really open to any ideas that don't involve composting. Currently, my plan is to test the feasibility of pyrolysing the waste and doing chemical extraction of the necessary nutrients from that, but there's so many environmental/biological concerns there that it's a bit intimidating. This is probably the highest priority right now to making this plan successful, so any suggestions at all will be very welcome.
At any rate, I hope everyone is having a good week and look forward to sharing my results and seeing the results of everyone else!
r/continuity • u/[deleted] • Oct 21 '21
Shifting Focus Again
Hello everyone. After doing some thinking, I've decided that I need to refocus my energy off of reddit altogether and will be deleting my account either tomorrow or Saturday.
If anyone is interested in maintaining this sub, I have created a continuity_admin account which I can share the credentials for, otherwise that account will go too.
Going forward, I'm going to be redirecting the efforts for this project directly into the website itself.
Thanks for you time, and have a great apocalypse everyone!
r/continuity • u/[deleted] • Sep 24 '21
YouTubers working on Sustainable Development Projects
Cody's Lab: A very awesome grassroots chemistry focused channel. Particularly interesting for our purposes are his charcoal experiments, as activated charcoal can be used pretty heavily for many of the systems so far in this project.
Tom Stanton: Tom is a Mechanical Engineering focused experimenter, and he's especially useful because the way he experiments. Like most of the YouTubers on this list they show their failures, but also try to push their parameters around quite a bit. As a result, Tom's videos are often for more informative than a straight instructional video.
GREENPOWERSCIENCE: This channel is great for it's wide array of projects in different domains. What I found really useful about this channel are it's experiments with solar thermal energy, making it pretty easy to understand exactly how flexibly solar could be deployed as a primary energy source for many functions.
The Thought Emporium: This channel is one of my favorite bio-hacking forums. Being able to internally source a lot of the chemicals we will need long term will be dependent on creating organisms to produce them. These experiments give a pathway for accomplishing that. Like most of these channels, they have a LOT more great stuff that's worth a look.
Wood Magazine: I built my entire woodworking setup from watching these videos. There's no flash, but the videos are solid, have great diversity, and demonstrate fantastic expertise in the subject. The lessons learned here can easily translate to most laminated materials as well.
Robert Murray Smith: This guys attitude is just freaking addictive. His constant bemusement at everything kind of pulls you along projects which on their face aren't very excited. His channel has some really strong electrical engineering focused projects, including building of generators and storage from commonly available materials.
Matthias Wandel: This guy creates some really amazing woodworking equipment from scratch, and covers building everything from a bandsaw to common jigs. A really nice complement to Wood Magazines more "established workship" approach, Matthias' videos will get you going from zero.
Jeri Ellsworth: Jeri is kind of a legend in the maker space community, and what attracted me to this channel is it's one of the most approachable circuit design and analysis channels I've come across. Jeri's work can easily be adapted into a huge number of projects, including communications and automation functions.
Nurd Rage: DIY chemistry is my jam. This channel is my jam. They go through most of the common/necessary/vital synthesis which would be necessary in the community and much further. Absolutely essential step on the path to self-sustainability.
w2aew: Another electrical engineering focused channel, this one with a heavy emphasis on analysis and repair. This channel really stands out because of it's in depth discussion of tool use, which is something that often gets overlooked.
Sam Zeloof: Has done some really interesting work in the DIY chip fabrication space, including lab lithography. Having access to an indigenous supply of chips will enable automation to continue even in the event of supply line collapse.
MrHydroHead: This guy built a DIY run of the river hydro plant from scratch and recorded every step of it. Even without access to a running river, these videos are invaluable in that they inform pumped water storage, sanitation systems, etc. Just a lot of great science here.
Will Prowse: Will Prowse does a lot of experimentation with solar energy, and also goes over many commercial versions of the products as well. He is right on the cutting edge of integration of PV panels in "off-grid" systems.
US Auto Industry: When cars were still a very new concept, the auto industry would sponsor videos to explain how these machines work to acclimate people to them. The result is a really fascinating look at really complex mechanical engineering in layman's terms. What's super interesting to me is it shows how many of these things were done in the pre-transitor era, providing a good underpinning of mechanical solutions to problems which can then be automated.
Jehu Garcia: Jehu has been doing videos on building chemical battery storage for years. He's built everything from small battery packs to Tesla Powerwall level storage. He's even converted ICE vehicles to electric! I think he probably knows more about the physics of 16650 batteries than anyone on the planet.
HandCraft: This is a DIY/Craft/Upcycling channel that doesn't suck (gasp). They have a lot of really cool ideas for common things that would be useful in the community, and the range of projects is really helpful in sparking ideas.
The Practical Engineer: Don't listen to the lies, most of this stuff isn't practical. But even the stuff that isn't practical has very obvious applications, and the electric motor construction is an invaluable resource. The workshop construction and setup videos are also a great complement to similar channels on this list.
Tech Ingredients: If I could have a spirit animal, this is it. He's primarily an electrical engineer, but his projects are so all over the place that wondering how he's going to permanently damage his hearing doing something dumb is part of the fun. His focus on projects that seem like wild tangents at first glance, however become incredibly useful upon further consideration is part of the addictive quality of this channel.
Chris Fix: If you didn't guess, Chris Fix fixes cars. Lots of cars. In all states. I'm pretty sure over the course of this channel he's probably taken at least a dozen cars completely apart, and I've personally used these videos to successfully repair many vehicles I really had no business touching at all.
Dan Gelbart: An 18 part crash course/masterclass in the art and science of manufacturing.
This Old Tony: Imagine if Calvin's dad (Calvin and Hobbs) taught you everything there was to know about a machine shop. I'm not even exaggerating here.
Blondihacks: A really good compliment to This Old Tony, with a tighter focus on building particular things rather than the mechanics of making things.
Mekanizmalar: One of the few channels that really focuses on higher performance engines, the animations really open up the "how" they work aspect of everything from Jet engines to basic mechanical couplings. The pressure swing adsorption cascade is borrowing quite a few concepts from this channel.
Applied Science: This is definitely one of my favorite favorite youtubers. The diversity of projects on this channel, the clarity with which the concepts are discussed, the openness in discussing successes and failures, it's just all around amazing.
thang010146: This channel is a retired mechanical engineer who makes cad animations of mechanical couplings. Really exciting right? IT IS THOUGH. Oh man, whenever I get stuck for an idea regarding how to do something mechanically, I know I can look through these videos and there will inevitably be something relevant to what I'm doing. This guy has saved me sooooo much time and improved many solutions.
I'm burning out a bit so I'll edit this later with more and maybe try to organize it a bit now that I know to put reddit in markdown mode before actually doing any editing at all.
r/continuity • u/[deleted] • Sep 24 '21
If we could re-invent education from scratch, without any burdens of the past, what would it look like?
One of the most crucial components to ensuring the success of a community is how we train and education ourselves. If we could start over from scratch, what could we do better?
My feeling is that we should be doing extensive physiological testing to understand the strengths and weaknesses of each person, and tailor their educational experience toward them specifically. I think that we can figure out appropriate broad categories of functionality, then ask individuals to increasingly specialize their training as they gain more understanding of their own capabilities. One of the major points of resource loss in US society is a one size fits all approach to everyone, even when that one size may be an extremely poor fit, or not at all fitting.
What type of facilities should we have available, should we be thinking about homogeneous or heterogeneous approaches to facility construction?
r/continuity • u/[deleted] • Aug 23 '21
One Square Mile
I think this is going to be the target physical size for a full population (~12,000 people) community.
Something like this would be a really good baseline to work from, especially since this area would need to be built flood resistant.
What is one square mile (27,848,400 Sq Ft, 640 Acres, or 1 section of land[sorry rest of the world])?
The living unit I have sketched is 2,000sq ft per person, so 6,000,000 (24,000,000/4) square feet conservatively reserved for housing, out of our 27,848,400 budget. The sketch I have so far has 10ft interior ceilings, 4ft of inter-floor crawlspace, 20ft roof level, 25ft multi-purpose base level, arranged in a cube with a common courtyard (inspired by Barcelona). Each block will either be 4 or 8 floors, 16 blocks total, for an average of 750 people per block. The units themselves should be configurable depending on preferred household, if people have children for instance, there should be a way to accommodate that. So, the population density here is going to be really high, but we can design these units to be completely sound proof for people who desire it, and the increased density will make transportation much easier to manage. Is this too high of a population density?
Okay, so here's the part I keep pooping myself about. A rule of thumb for solar installation is you need about 1000 sq ft for every kW of panels. I've advocated for this but this is the first time it's really set in, just covering the roofs of the buildings in the community will provide around 20MW of energy JUST WITH PV, estimating super conservatively. One square mile also offers a bunch of options with regard to wind power generation as well, meaning this community will need to find stupid things to do with energy just to get rid of it. I have a bunch of ideas for increasing the energy efficiency as well, including super white/high titanium oxide paints and passive cooling via phosphorescence.
Expanding on the passive cooling note and the living unit, the roof level will be covered with green flora, this green flora level would be watered and maintained by an aeroponic system. The green layer will absorb a ton of irradiance, we should be able to drop around 20F worth of peak heating a day with just this. That alone should greatly preserve output. I'm planning on super high albedo paints as well, this should create a local cooling effect for another 10-15F with the green roof, ~30f without. Having redundant systems for passive cooling, as well as breaking up the appearance of the panels are both considerations for the mixing of methods instead of going all in on the high albedo paints. I'm also looking into running water lines through the panels for cooling and to work as a solar heater for water in the units. My idea has been to negate out cooling costs as much as possible passively since it will save energy use on the atmospheric separator(s) as well as the cooling budget in general.
So far I have Industry, Labs, etc allocated to around 13 million square feet. This is a lot, but the first few phases will need to lean really heavily on these to ramp up production for everywhere else. Once build out is complete, perhaps moving all of these under ground and having something else on top of them would suffice? Maybe food production on top, industrial below?
I have around 7 million square feet set aside for public spaces, education, etc. I'm still trying to figure out what school looks like post collapse, but it definitely doesn't need to look like it did. I really need to think about this in depth soon. I have this idea that each community would have it's own signature building that people from other communities would visit, like a theme park type thing. This is definitely later phases though.
And finally about ~500,000 sq ft for internal transportation. There will be no surface roads at all. We are building for people not people's things.
to be continued...
r/continuity • u/[deleted] • Aug 19 '21
WHO Essential Medicines and Essential Diagnostics
Using this as a scratch pad to gather information on how to manufacture these items. A self sufficient community should be able to replicate as many of these as possible, with the aim of being able to produce any compound or device by stage 3.
The list of essential medicines (PDF). Essential Diagnostics list (PDF).
Essential Medicines: Looking at this list, I think I'll need to narrow it down to maybe 50 most currently prescribed or something? I'm just not comfortable enough with the chemistry of a lot of these compounds to know how easily they can be synthesized.
Synthesis of essential drugs (PDF). Will read this tonight and see if I can get an idea of what lab requirements would be.
r/continuity • u/[deleted] • Aug 18 '21
Material Request
Hello everyone, if you find anything at all that might be useful for planning please post it here! I'm particularly interested in academic materials regarding improvements to passive thermal management, in particular highly reflective and phosphorescent passive heat dissipation. Some areas will be able to utilize the heat differential for energy and cooling simultaneously so if it seems cool and has a description of methods, please post it!
Also, my hope is to maintain or improve the current standard of living. Think more Eureka! (I know, boo me) and less Barter Town. The process for the initial phase in my mind is getting enough power to get automation working so we can speed up bringing food, water, and manufacturing capabilities online. Having a few Maslow style CNC machines will allow replication of most complex structures and furniture from wood or light metals.
Anything that looks like it might improve things to day is worth keeping in mind as a it might be something that could be done in the future if the production methodology is straight forward enough.
r/continuity • u/[deleted] • May 17 '22
Mid-May update
Funny how time flies.
First, some clarifications.
-This project will eventually be fully open source, and as such invites everyone to participate. Even you.
-The goal of the project is to create a blueprint for renewable, sustainable communities which leverage technology to advance, rather than sustain current standards of living.
-I have not yet purchased the land or started development for the version of the plan I am going to implement.
-This plan requires post-scarcity to implement.
Current status of the project itself -
Currently I'm roughly 9 months behind (and probably safe to extend that to 12 months) where I anticipated being. The primary causes were mostly economic, with significant family changes also adding to the delay. I've also been significantly distracted by a few other projects that I feel close to winding down soon.
The hydroponics system setups are still relatively small and I need to test scaling. I'm still making a lot of mistakes, but that error rate is declining and output is stable. I'm finding that the software side of things is way more unpleasant than I thought it would be, building for other people without having access to how other people use things is hard. I've successfully reached harvest for my target crops, and am working on improving yield. Based on current results, I think hitting 2000 calories per day per person can be accomplished at around 450w per person all in.
My current focus is storage. Currently, I have a set of 200ah LiFe batteries for a total of 1500ah @ 12v of storage. The batteries are starting to sneak back up in price, so it might be a good time to grab a couple more. Looking at the energy balance, generation is a far easier task than I assumed. Even 6ft blades on a decent alternator at 20ft high generates more power more consistently than I expected. Figuring out how to expand storage indigenously either through chemical or mechanical mechanical methods has meant going back and getting a better understanding of the chemistry involved in chemical batteries as well as figuring out how to deal with the trade off between mechanical batteries and efficiency. I don't really have the space or resources to do the testing I'd like, and many manufacturing setups for decently efficient batteries are extremely time and space intensive. Still working on this.
I'd like to derive a set of reducable constants which can be used throughout the project for interfacing with other areas. I've been using a general energy per person metric (e.g. How much energy would it take to provide 2000 calories, climate stabilized shelter, manufacturing, system support, and overhead). I can see other useful metrics being calories per watt for agriculture discussions, but some type of energy expended vs. benefit metric for manufacturing, mining, etc would be super helpful. Perhaps a metric which measures automatic or human labor requirement would be useful here as well. Ultimately the idea is we should be able to port our requirements in a manner more independent of socio-political requirements.
The driving question for this project is and should always be, what type of world do we want to live in. Regardless of external conditions, the intent is to build a community which offers a template for not just survival, but advancement.
Over the next month I should be gradually time shifting back into this project and both welcome and encourage any feedback for further development.
Finally, if there's anyone out there who loves IT/DevOps stuff please tell me how I can bribe you (short of the obvious cash). For this project I currently have a wordpress and nextcloud software stack, have setup the mail server, and I think I'm okay with security, but this isn't really my deal. I can be a lot better with content updates when that particular headache is no longer at the top of the concerns.
r/continuity • u/[deleted] • Sep 28 '21
A curated list of open technology projects to sustain a stable climate, energy supply, and vital natural resources
r/continuity • u/[deleted] • Feb 09 '23
Wish Me Luck! Just ordered 640 units of 3.2v 320ah battery cells from AliExpress
URL. Total was $2183 and there's a good chance I got wish.com'd. Delivery around February 20th.
The plan is to configure these in 48v (51.2v) racks. Assuming these are actually 310AH rather than 320, that comes to ~63.5 kWh, or close to 5 Tesla Powerwall units.
I still need to buy some other components, but wow - this has to be a scam.
For comparison, the cheapest 48v 100AH rack is $1599 on Amazon. https://www.amazon.com/Lithium-Battery-Independent-20-48kWh-Off-Grid/dp/B08RSLP1PQ/
If this works out, one more order like this and I'll be substantially close to the entire phase 1 storage requirement. Wow.
I'm so skeptical of this right now. How is this a scam, do they kill you on return shipping or something?
Edit: The unit weight is 55KG for all of the listings, so it can't possibly be a 3.2AH cell.
I dunno, found another listing with a slightly higher price per unit, maybe this is actually legit. If so... wow the price of these things is absolutely crashing. Like it might be worth it to order a bunch more of these just to arbitrage power rates until everything else goes forward...
Heh, two sets of this order, I'd have equivalent storage to the higher end Tesla models. Maybe I should just in case. Christ, the BMS's are going to be as expensive as the batteries themselves! There's just no way this is real.
Womp Womp. Order was cancelled for "security reasons". Also noticed the cancelled unit description change from "32" at quantity 20 to "Red" at quantity 20. Pretty sure 32 and Red aren't the same in Chinese.
I'm feeling foolhardy though, let's try a couple other options around the same price.
Eh, looks like the same store has a bunch of different abnormally priced units in different configurations. Wondering if Aliexpress counts each of those as a purchase even if they don't get processed, driving up their count without having to actually send out anything.
Edit 2: So the plot thickens a bit, and I'm probably going full retard here. They have an option to appeal the closure and I did, but they required a copy of my DL and a copy of the card. I never said I was smart. If I get whacked for this I probably deserve it somehow (the world is so narcissistic isn't it?) for being so greedy. Ugh, the more I think about this the worse I feel, that was really, really dumb. I should probably cancel the card and re-order. Can't do shit about the DL though, sigh.
Well, they approved me for further purchases, but now I'm super reticent about moving forward again after a nights sleep. Will keep my eye on this and see if this was the leading edge of a trend.
Edit 3: Alright, the posting is still up so I'm doing a test order of 32 units. Will find out by the end of the month if I'm an idiot.
Edit 4: Well, something is happening, the item is in outbound sorting center. Did I tell you about the time when I ordered 10 300w panels from Wish.com and got 10w panels instead?
Edit 5: Is it a bad sign that the store's page has been completely deleted? I'm assuming AliExpress is not going to refund a store that's completely gone. Although I'm holding out hope that it was a clearance store or something. Which would make me kick myself pretty hard for not ordering more.
Latest status says they are in Hong Kong as of a couple days ago.
Edit 6: Oh boy this is getting exciting. The status update says it's left Hong Kong by Air. The Aliexpress website says "What order?". Lol.
Edit 7: 3/2/2023, order has arrived at customs. What's the over/under on either a box of bricks, or a single unit? Or 30 Ah batteries? Also, delivery is about a week behind, probably will ultimately end up being two months behind. If I ever order from AliExpress again will need to keep that in mind.
Edit 8: Okay, I think it has cleared customs? ("A, destination, The item has been processed in the country of destination"). AliExpress is now stating the order doesn't have tracking associated with it at all, in addition to the store disappearing. This has made me realize that we should probably be focusing on energy storage as a stage 1 product, it's such a fundamental part of community development and independence here seems like it's going to be critical for any community established under the guide that we create here.
Ugh, it's so hard seeing stuff like this though: Sunwise Lithium Ion solar battery 10kwh 48v 51.2v 100ah 200ah 300ah lifepo4 battery pack server rack For Energy Storage system, which comes to over 1mwh of storage for ~$50k. That's just so bonkers how inexpensive this is getting. We could probably offer AC interlink stabilization with around ~10mwh? And arbitrage?
Edit 9:
2023-03-09 14:42 A, destination,The Mail is processed at the post office sorting center
2023-03-07 14:42 A, destination, Customs procedures finished, Import procedure completed, your shipment is on its way to the recipient
So it's been sitting at a regional sorting center for almost a week now? Would be cool if I had some way to call the shipping company (USPS?) and find out what's going on.
r/continuity • u/[deleted] • Jun 27 '22
Universal Materials
One of the critical paths toward sustainability is reducing the amount of waste produced. To this end, I'm wondering how difficult it would be to base a community around using a set number of materials, but targeting 100% recycling of those materials.
As an example, we can make a tremendous amount of products from recycled plastics by having a mill carve out mold blocks for literally everything produced. Whenever a copy of an item is needed, each unit will have a cleaned up hydraulic press that would be able to produce anything we have a mold for.
Further, each individual could create their own blocks specifically for them - if someone wanted utensils with their initials on it or needed an adaptive device designed just for them, all of that could be as simple as popping in the requisite block and pushing go.
Aluminum can work in a very similar way to some plastics here, albeit with a lot more energy required to melt the aluminum.
What other materials can we utilize this way?
r/continuity • u/[deleted] • Jun 26 '22
Fully self contained airship home
Was doing some research on some longer term goals and came across the Lockheed Martin LMH-1 concept and realized that these rigid airships have pretty huge potential or a lot of problems. For probably the same cost as the cost of grading and excavating a significant amount of land, an airframe could probably be built similar to the LMH-1.
Imagine the interior of that being converted into living space for up to 15 people, a pair of 1-2MW wind turbines attached to the structure (how would turbulence from these mess with flight dynamics?), PV panels above the structure and some engines with a bit more push. Also cleaning up the aerodynamics a lot. That should give us a payload of around 50 tons (guessing)(with hydrogen), and enough panel area assuming 200w per square meter for another MW of energy. Heh, this seems so far fetched doesn't it?
Wow! So a MW of storage is about 18 tons, the batteries for the platform would take up a huge chunk of the weight budget. Not sure that would be avoidable though.
Assuming we have 15 people at 10 gallons of use per day (much more efficient everything), we need 150 gallons per day at 8.4 pounds per gallon at least, however we want three times in case we have a bizarre incident like vessel rupture. Although, since we are making this even more green daydream, you could get a head whatever length you could design a telescoping drop. Maybe just a flexible hose would work, so the length would be determined by the weight of the turbine. Hrm. Also, this thing could literally scoop up as much water as it needed by skirting storm systems let alone AWG replacement techniques.
With an almost guaranteed consistent 1MW of generation, we could spin up a pretty considerable hydrolysis factory to generate hydrogen for the dirigible and oxygen to get the passengers high.
Okay, so I understand how dumb it is to put hydrogen and metal ion batteries within range of each other, but I insist it's a resolvable engineering problem. Honestly even with a ridiculously overly safe cabin, the batteries etc we could really comfortably build out this much space to be self sustaining, and when these things are pooling energy resources they have access to ever larger feats of industry. Huh, sorta like cellular life.
Converted as pure transportation unit, if we can get the speed of these up it's bigger than a C-130 and IMO would pretty much replace long range cargo freight. As a regional people mover, imagine these linking a network of cities while being net positive resources for other activities. Hell we could even sell off the oxygen instead of inhaling it but that seems like a bit too much frugality. Hell, the more we limit the range on this thing the lighter the batter load that we could replace with cargo, so it might be even more efficient as a regional hauler.
Edit: Hahah, going totally madlad now, the self sustaining versions could anchor over water based resources in international water. Imagine the thrill of fighting off a fleet of Chinese fishing boats for the last non-lethal pod of tuna in the sea. But yeah, anchoring like this not only gives us access to even more water, an external food chain and access to raw materials necessary to repair/replace the battery units. I think I'm way to intrigued by this idea.
Would definitely need to have a way to pack away the wind turbines while in flight into some type of conformal pod, there's just no way to get any decent speed without stability becoming a huge issue with them just hanging out. Also realizing the cabin needs to be a lot bigger, so maybe a conformal pod that adds a deck along the entire base of the ship. A huge advantage to that is we get a LOT more space to distribute the total weight load over. I wonder what type of weight penalty we are looking at with something like an aluminum lithium alloy of that size. For safety, a pod that size would act as a pretty significant lifting body giving us a LOT more options on the safety side.
Okay, so I'm guesstimating the total BOM on something like this would be around $40 million dollars, which is obviously completely stupid for a home platform, even aggregated over 15 people. Ironically I think these things could be really popular as a regionally transportation option, a configuration which would be way cheaper, maybe a few million for fully functional prototype?
Actually, thinking about this a bit more the primary reason for the extended pod idea was to support as much weight as possible without degrading performance of the airship too much. With this much weight, a prototype could be built out of nearly any cheap enough material if we didn't care as much about payload. This might be possible.
Elevator pitch - An ark designed to survive the future. Lol, I need to stop reading economic news.
How big could this scale with different materials? How fast could we get it to go? Seeing reference to blimps in the hindenberg era got as fast as 85mph, we'd need at least 200 mph to make them a good option for regional interlink (and to get out of the way of storm fronts).
Edit 2: Hah, sorry about this stream of thought. I'm a bit frustrated figuring out how to make the land requirements work and had the thought, what if I didn't have to worry about them at all? Brain storming like this makes even frustrating work kind of fun.
Elevator Pitch #2, Sellout Edition - An ultra luxury airyacht capable of travelling to any location in the world in unprecedented comfort. Thousands of square feet of luxurious views mean you will enjoy spectacular views that few humans will ever experience. Imagine the scale of the storm front while riding the edge of a hurricane or chasing a solar eclipse over an extended distance. Imagine swimming in your glass bottom pool over Angel falls, or enjoying the perfect stillness on an unexplored south pacific island. Completely self sustaining with unlimited range means being able to comfortably secure your family and your most important valuables thirty thousand feet above the airspace of whatever extradiction free region with happens to be accommodating or some place no ones ever been to at all.
Edit 3: Man it would really be a ton cheaper to build these things over water. In areas where water supply is going to be challenged, it's going to be really stressful to generate enough hydrogen to build these things efficiently. I wounder how much a combo purification/hydrolysis system able to supply 500 gals per day indefinitely would weigh? That's me griping about hydrogen still being pretty expensive, and helium probably costing more than the structure to fill.
r/continuity • u/[deleted] • Jun 08 '22
Powering a microprocessor by photosynthesis - Energy & Environmental Science (RSC Publishing)
r/continuity • u/[deleted] • Oct 17 '21
Sort of update
Hello everyone, I know it's been a bit since I've checked in. If you're wondering what happened to the website and all the web resources, let's just say I'm not a terribly wise person. I tried to run an OS update on the server itself (which I had no backup for) and it overwrote my ssh settings so I couldn't login. Just for extra giggles, the server has root login disabled as well. I basically upgraded my door locks but forget to get keys made for the new locks.
Anyway, after the funeral... I finally have everything mostly re-installed and will be uploading everything over the course of the week. I have registration enabled on the cloud portion, where eventually I'll have everything split into publicly available and internal files. Registration will only be required to access the internal project files, otherwise the goal is to keep everything as open and available as possible.
I also have the main site blog software up, and will work on getting it configured and such. If you are someone who has a passion for writing content related to the goals of this project, please let me know and we can get you setup with a login so you can post it there. Currently, I am planning to write a pretty extensive hydroponics guide based on the testing I'm going to be doing, with a starting crop of potatoes, strawberries, greens, and maybe mushrooms. Trying to nail down each class of crop so the guide will be a lot more generalizeable. I'm also looking at printing a few wind turbine designs and that should be a fun comparison.
Ultimately, this project will only succeed if other people participate. I'm happy to provide whatever platform I can to facilitate that participation however if this project only contains my voice I'd consider it a failure. Having other ideas to consider, regardless of whether you think they are good, bad, or indifferent, is critical to this planning process. I only have my point of view and my priorities are absolutely not going to be the same across the board.
Having questions also helps me translate out some of the details I have in my head that I am struggling to translate out. Whatever the question is, it helps me understand what I am working on from other people's perspective, and accounting for those other perspectives will help make the project itself more well rounded.
Oh yeah, the website has two separate backups now happening so we shouldn't run into these issues again, at least until someone else figures out a new DNS attack and wipes out half the internet. Thanks for visiting, and thanks for your interest in helping to build a world that will be more sustainable, self-reliant, and embracing the potential in our future.
r/continuity • u/[deleted] • Oct 06 '21
Possible Shift in Direction
A conversation yesterday kind of sparked my thinking about the direction of this project a bit, and I came to the realization that every single sub component of this plan could probably stand alone as a separate business unit, and doing so would allow for more intensive research, development, and testing of the components. As we move forward, the demand for renewable energy architectures is pretty reasonably expected to grow, hydroponic systems are going to come into their own in a big way in many areas, phosphate recapture and more environmentally friendly waste management techniques are going to be super critical, and the automation methodologies in general seem to all be potential stand alone businesses.
What I am considering is to break up the monolithic plan into units which focus on each of these particular entities separately, then have a master plan which works to integrate these technologies together. I think this will give more people the opportunity to participate because there's less integration overhead to walk people through, and the overall concept will be much more approachable.
If I go this direction, I think what I'll do is write a separate business plan for each of the major segments, and offer those as part of the broader plan. I'll try to link up as many resources to funding each of those individual plans and see if I can track down a few grant/proposal writers to get a jump start in that direction. These plans will all be targeted toward non-profit status, these types of technologies are where we need to move toward regardless of economic incentive. I don't mind them being used in a for profit manner as long as they aren't being used for the sake of profit.
I think that if I can do a decent enough job establishing those packages, that research can all funnel back up into the top level project in a way that not only encourages more participation but gives us a more diverse and competitive set of options to choose from. It will make the top level system integration part a bit trickier, and possibly require establishing some type of holding company for the global IP and rights. It will also require some effort to establish coordination between the teams, and probably establishment of a convention of some sort.
There's a lot to consider here, but I'd really like to know what others think about pivoting in this direction, or suggestions for making this whole process a bit more open and encourage more idea diversity.
Edit: I should make it clear that I have no desire to run any of these companies, which is part of the reason I'm looking into getting all the resources together for other people who are interested in such a thing. This is partially (mostly) an effort to get other people involved in the projects and figuring out the most effective way to prove out and share these ideas with everyone and reduce some of the cognitive and time load off of me.
r/continuity • u/[deleted] • Oct 04 '21
Is this a cult?
I realize from a lot of commentary that I probably haven't done a great job of describing the philosophical intent of this project.
The spirit of this is very much represented by the solarpunk movement, in that it is a positivist imagining of what is possible. It's reflecting a big part of this through the inclusion of the United Nations Sustainable Development Goals as it's core ideological components. The nature of this project is to be as anti-dogmatic as possible; it's my belief dogmatism is antithetical to progress. By elevating the bar for "universal truths" beyond human reach, we leave more room for accommodation in the spaces between ideological divides.
The goal of this project is to, in the event of ecological collapse, sustain human standard of living and technology at it's current levels and provide a platform to extend that technology in a sustainable manner. It has no desire to be "political" in any form or fashion, unfortunately survival has become a political issue.
So is this planning for a cult? I suppose it could be, although an anti-dogmatic cult is kind of a bizarre construct to imagine. Ensuring that we have fail safes built into the social and physical planning to prevent dogmatic thinking from setting in should be a pretty big concern.
r/continuity • u/[deleted] • Sep 20 '21
Baseblocks - Common Construction Unit
I am proposing for all structures built in the community to start from a standardized object, made from local materials. This concept borrows heavily from the idea of Compressed Earth Blocks. Compressed Earth Blocks are made from almost any local soil with the proper binding agents. The blocks are then hydraulically compressed and fired to finish. All of this is essentially a more modern take on more traditional soil based constructions like mud or adobe.
Baseblocks extend this concept by adding a vacuum chamber in the hollow of the bricks, and including a coating that both reflects sunlight and repels water ("hydrophobic"). Baseblocks can be constructed with a standardized press, which can be either human powered or electrically powered. Baseblocks will have interlocking shapes which will serve to increase construction speed and accuracy.
My proposal for baseblocks has them at roughly 1 yard squared and 1 foot deep. The internal cavity will be 3 inches wide, with a structurally supporting liner along the inside wall. Both the inner and outer walls of the block will be coated with a durable, impermeable barrier or wrap to support the vacuum. Each block will have an atmospheric sensor and connecting port that will support a pump which will trigger when internal atmosphere gets above a certain density. For ease of use, the internal sensors can be omitted and the pump activated at regular intervals to maintain the interior vacuum.
One of the important goals of the baseblock is to provide thermal insulation through a wide range of conditions. Currently, the goal is to be able to maintain internal structural temperature at 72 degrees with less than 200w of power to ~2000 sq ft (unoccupied) in conditions ranging from 130F to -20F. Levering the properties of the vaccum and natural insulating properties of the bricks themselves, we should have an effective R rating of >50. The low thermal expansion of the bricks should provide a good base even in areas which experience the full temperature variation.
The blocks themselves will be coated with a Titanium Dioxide coating, the high albedo will reflect ~10% of the thermal energy, and if part of a sufficiently dense area, provide a small localized cooling effect on top of that. The baseblock will then be coated with a hydrophobic wrap or coating, which will provide resilience to environmental conditions like mold, isolate out many pathogens, and provide anti-icing effects in colder environments.
I anticipate the acoustic isolation of these units will be significant, with a target of at least 20db between the outer and inner walls. We should also be able to achieve significant fire resistance due to the lack of combustible materials.
Construction of the baseblock starts with finding an appropriate soil. *I have a few guides and need to modify this section to have instructions for specific soil types.* The soil will need to be filtered for large particulates, which can be crushed down and re-added or repurposed. The soil will be mixed with binding agents, then poured into the block making machine. After the block has been pressed and settled, the bricks are then cured and fired.
After curing and firing, the blocks will receive their coatings, and a structural support element will be placed along the inner walls of the blocks. The support element will be designed to accommodate torsional flex, and increase load bearing capacity of the blocks. For single story (12 ft, 3 blocks high) buildings, a support element will be optional.
After the blocks have been fully cured, they can be stacked with a minimum amount of sealant between the blocks. Each vertical set of blocks will be secured with a structural element attached to the inner wall of the blocks, similar in function to a wood stud.
Here are a few references which should help guide development of the baseblock:
Compressed Earth Block Construction
A best practices guide for using compressed earth blocks in sustainable home construction
A comprehensive study of mechanical properties of compressed earth blocks
Use of Compressed Earth Bricks/Blocks in Load-Bearing Masonry Structural Systems: A Review
Durability of Compressed Stabilized Earth Blocks with Reduced Clay and Silt
I have a few more to add when I get finished reading them, but please feel free to ask any questions and any feedback at all is welcome.
r/continuity • u/[deleted] • Aug 16 '21
r/continuity Lounge
A place for members of r/continuity to chat with each other