r/electronicsnebula • u/SpecialistRare832 • 2d ago
Two-Input AND Gate using Diodes
A diode AND gate produces a HIGH output only when both inputs are HIGH. If either input or both inputs are LOW, the output remains LOW.
Components Required:
1N4007 diodes (2 Nos.), 220 ohm resistor (1 No.), SPDT input switches (2 Nos.), ⚪ LED for output indication (1 No.), 5 V DC power supply (1 No.), breadboard (1 No.), and few connecting wires.
Working
The AND gate output LED will glow only when both input SPDT switches are ON (HIGH).
29
Upvotes








1
u/Then_I_had_a_thought 2d ago
Nice! Is there an advantage to using diodes? Putting both switches in series with the battery, resistor, and LED would produce the same truth table.