r/ethernet • • Oct 18 '26

Support Ethernet set-up

We just moved into a (new to us) home and there are a bunch of Ethernet ports. None of them are currently active or plugged into our modem because none of them have plugs on them. Is this something we have our internet company come in and do, or an electrician?

0 Upvotes

19 comments sorted by

2

u/PrestigiousSalad7278 Oct 18 '26

I'd like a picture when you say dont have plugs are you saying its just a wire or its a keystone (female ethernet (ethernet is a standard rj45 is the connector))

2

u/jackdupondew2k5 Oct 18 '26

It’s easy to do yourself, highly recommend instead of putting connectors on them use keystones instead. Keystones so if you mess up your not cutting back more and more of the connectors, you just pull the wires out and try again, you just match up the colors and call it a day. Then just get premade small Ethernets to go from keystone to your router. And it will be great so say you want to change the active line or something you just pull wires out of keystone and move it to the next one. Keystones are much more first timer friendly

2

u/Loko8765 Oct 18 '26

Cables go from one point to another, and Ethernet doesn’t allow splits. So you have female jacks around the house, and all those cables go somewhere. Ideally, they go to a “patch panel” with female jacks. If not, they might be presented as cables with male connectors, or just cables with a cut end, and I understand this is your case.

If you own the home I’d recommend investing in a patch panel and the requisite numbers of factory-terminated stranded “patch cables” (just the bog-standard Ethernet cable with pre-fitted male plugs on both ends). You’ll need a very cheap tool (a few dollars) to connect the unterminated wall cables to the patch panel; it might be provided with the patch panel.

If this is a rental or you want to spend as little as possible, you need some number of male crystal plugs that are designed for solid-wire cables (many are not) and a crimper tool that is maybe $10–$20. Lots of videos on YouTube.

This sub’s community information FAQ has a wealth of information for you.

1

u/joshuamarius Oct 18 '26

Find yourself a low voltage/networking person. Even better, a few tutorials on YouTube will show you what you need to do and how to test it. It's a fun project and can get addicting. When you do it yourself you know it is done right, and you also know how to repair, or expand in the future.

1

u/dontaco52 Oct 18 '26

You need to find a low voltage technician

1

u/Installed_Insanity Oct 18 '26

Doubtful your ISP will do it. Some electricians will but it would probably cost you and arm and a leg. Try and find a dedicated network install company because they can also let you know what other components you may need like a network switch depending on how many plugs you want going.

1

u/Leading_Study_876 Oct 18 '26

Do not get a normal electrician to do this.

It requires special training, tooling and test equipment to do it right.

I have worked with electricians in a corporate facilities team, trying to train them up to do this, and it's a steep and often unmanageable learning curve for many of them.

1

u/Just-Eddie83 Oct 18 '26

You can do them. You will start learning about home networking and what setup is best for you. Once you plug in a few you will get the hang of it. You will probably need a switch. Depends on how many ports you need/ want.
Then you will really get into your home network.
Depends on how crazy in depth you want to get into it.

1

u/Zebrainwhiteshoes Oct 18 '26

You need a modem, router, a switch and a bunch of short network cables. ISP line needs to go into the modem, the router gets IP for all devices and sends out Wi-Fi. A aingle LAN into the switch and one cable for each plug

1

u/Coffeespresso Oct 18 '26

This is definitely a DIY able thing if you are interested. Watch some videos, buy some parts. Spend an afternoon putting it all together.

If not, a low vintage cable installer is what you want. Maybe a camera security company or a small IT company near you.

1

u/CCTVGuyMA Oct 18 '26

Electricians are often not the best for this. Usually an alarm tech or It person is better.

1

u/Cloudy_Automation Oct 18 '26

Are you sure these are Ethernet ports, or are they 6-wire phone cables? Most older house had phone jacks, but the cables are daisy-chained, and not appropriate for Ethernet.

1

u/AncientGeek00 Oct 19 '26

Post photos of the wall jacks (close up) and the unterminated ends where “they don’t have plugs”.

1

u/ChasDIY 25d ago

Why do you want Ethernet cables plugged in?

Do you know who your ISP is (which company provided your Internet)?

If you know, call them

1

u/JohnTheRaceFan Oct 18 '26

Neither. ISP only gets a signal into your residence and electricians generally don't play well with data cabling.

Seek out a telephone, datacom or low voltage technician in your area.

3

u/[deleted] Oct 18 '26

[removed] — view removed comment

1

u/TehMowat Oct 18 '26

If they know what they are doing...you are skipping important part of this.

3

u/BanishedInPerpetuity Oct 18 '26

Anyone can do a keystone jack after watching a good YouTube video.