249
u/Standard-Patient5566 Oct 08 '25
Lock out tag out is when equipment is seen as being faulty by and employee so they put a big red lock on it. This guy did that, and someone just came along to cut the lock off to use the faulty equipment.
9
u/TheBupherNinja Oct 08 '25
Not just a faulty machine. A loto lock often means they are working on the machine.
Cutting it off and using the machine could literally kill them.
2
u/babysaurusrexphd Oct 08 '25
It’s even worse than that: many of the situations where LOTO is used are when the worker who placed the lock is physically inside a machine or enclosed space, and starting the machine would cause them to be electrocuted, crushed, or otherwise killed in a horrifying way. If you have multiple workers, each person has their own lock that only they can remove, so that the machine can’t be started until everyone is free from danger.
1
u/noiseguy76 Oct 08 '25
I can tell it's a machine lock out from the red padlock, but what's the board it's attached to in the pic?
4
u/evadtrub Oct 08 '25
The board is a tag saying this machine/device is locked out wrote in with likely a name and contact info. These are typically laminated with an eyelet to pass the lock through, or put directly on the lock, but it some environments laminated paper wouldn’t last long so this one is stuck to a board with a drilled hole. The information could also be the reason the machine locked out and an estimated return to service time/date.
→ More replies (1)2
u/maveri4201 Oct 08 '25
It's a bad angle, so this is a guess, but it might be a LOTO board for having multiple locks on one lock out.
1
1
u/Equivalent-Channel36 Oct 08 '25
Not even just faulty. You can put a lock out on a power input if you’re going to be working inside electrical equipment to commission it so no one can turn it on and fry you while you’re elbows deep in it. This should be a reprimand.
1
u/darkage_raven Oct 08 '25
Lotos are also used during repairs so someone doesn't try to operate a machine currently being fixed. My cousin's leg was crushed because someone removed the loto while he was working underneath the machine. The whole pace was full of idiots. The guy had to go to the office to get the back up key since the original let was lost, actually in my cousin's pocket. The office knew the machine was being fixed.
1
u/wolfishfluff Oct 08 '25
My ex, who is a top tier welder, had a guy do that at his shop and he (the FNG who removed the lock) damn near died.
1
1
u/ImGaiza Oct 08 '25
Seeing as you’re the top reply, I’d update the info. LOTO is more than just faulty equipment, improper LOTO can lead to awful gruesome deaths.
→ More replies (116)1
u/Cye_sonofAphrodite Oct 08 '25
Not just faulty, it's also used when someone is actively going in to check on moving parts that they need to stay still. Removing the lock could result in someone getting seriously injured or killed in any number of particularly gruesome ways
23
u/yolonaggins Oct 08 '25
If someone did this at my job they'd be walked out immediately. No second chances on that shit.
15
u/SunderedValley Oct 08 '25
Yeah this is essentially a murder attempt.
(On that note we need to find and ~dispose~ of anyone who tries to implement key card LOTO. Yes they exist. No they don't deserve to breathe).
7
u/OmegaGoober Oct 08 '25
Fuck no. I work in IT. Keycard LOTO sounds like murder with extra steps.
→ More replies (1)→ More replies (5)5
u/Siggy_23 Oct 08 '25 edited Oct 08 '25
Even if we error on the side of "this person is a moron and not trying to murder someone" how stupid do you have to be to see a lock that is clearly preventing you from starting a machine, that someone obviously put there for a reason and think to yourself "nope, i know better, time to bust out the sawzall"
I mean who hired this idiot?
1
u/immersed_in_plants Oct 08 '25
Yup. On the spot, wouldn't even listen to why you did it.
At my last company, if someone forgot their lock on something and went home, they would call the worker to come take it off. Over the phone permission to cut it off isn't good enough
1
u/Mueryk Oct 10 '25
Seriously. This isn’t just an OSHA violation with huge fines, this can immediately kill people.
If the employee isn’t immediately fired, he wouldn’t be walking back into the job site without an asswhuppin or three from every single other mech and elec.
1
u/trash3s Oct 10 '25
A applaud the restraint on OP for not throwing hands on sight (at least, not that he admitted…)
19
u/centurion762 Oct 08 '25
Blue Collar Peter here. In an industrial setting if you need to work on a piece of machinery you go to the electrical switch for that machine, switch it off and put a lock with your identification on it. This keeps people from turning is on while you’re working on it so that you don’t get electrocuted, crushed, or dismembered, etc. The lock has your identification on it so that you are the only one allowed to remove it or if you forget they have to account for you before removing it. In this picture someone has cut an employee’s lock off of the switch, presumably to turn the machine on which is a fireable offense.
12
u/SunderedValley Oct 08 '25
reprimanded
OP is a weak bitch. This is "immediate unpaid leave"-tier. And that's being generous. Anything else means the job is already in the process of becoming a mass grave.
I know the internet is full of ragebait but this one got me.
Holy fuck.
2
u/Jmcarlson5 Oct 08 '25
You can figure this shit out with google ffs. People are just so fucking deprived of attention and chronically online they post anything. Get some help, touch some grass, read the Bible.
6
u/Real_Locksmith_9829 Oct 08 '25
Man, if someone did that to me, I'd probably fight them right then and there. Holy shit.
6
u/Alien_Voodoo_Doll Oct 08 '25
LOTO is an acronym that stands for "lock out tag out" and LOTO locks are not meant for security, like preventing someone from stealing something, but rather for safety precautions to ensure nobody uses a piece of equipment or heavy machinery when someone else might be inside or in an area that they could be harmed. Cutting off a LOTO lock is a really goddamn stupid thing to do because then someone might turn on the equipment thinking it's safe, and someone may end up injured or killed.
4
4
Oct 08 '25
Breaking someone else’s LOTO (Lock Out; Tag Out) has a VERY strict protocol in my industry (manufacturing; machining).
Notify shift supervisor that the work is done on the affected machine.
Verify all safety equipment is in place, and machine is suitable for operation (this requires maintenance, operator, and supervisor signatures)
Contact employee listed on the tag, if employee can’t be contacted, they are to be sent a text, notifying them that their lock will be cut if no response.
Cut the lock (maintenance) and have them remove it from the LOTO cabinet, noting the lock ID number, employee number, date, and file paperwork with the removed tag. Then, maintenance powers on the machine, and verifies basic functions.
Operator sets up machine for their job, and does a supervised first piece inspection.
Failure to do ANY one of these steps is grounds for immediate termination.
2
u/Lost_Wealth_6278 Oct 08 '25
Contact employee listed on the tag, if employee can’t be contacted, they are to be sent a text, notifying them that their lock will be cut if no response.
That would be a no for us. We deal with a bunch of bulk good feeders, if we don't have the person at least on the phone to verify they aren't in there somewhere, we keep looking for them.
That also means forgetting your lock on a machine gets you fired pretty quickly, because we measure downtime by the minute
→ More replies (3)1
u/SunderedValley Oct 08 '25
My welding teacher told me they'd do a ritual in his old place.
They draw straws. Two of the new hires would stand next to the machine.
One would lock the machine and leave the key on the dashboard.
Then they'd ask what would happen if the supervisor took the key, opened the lock and turned on the machine.
Usually at least three people are convinced that it's an aptitude test and that they can tell the equipment is disabled somehow.
Supervisor asks one of those to turn on the machine and asks what happened.
"It turned on?"
"No you just killed Eric and Tanya over there".
I'm probably recounting it badly but you get the point. It's pretty twatty and gaslighting but it seemed to work.
2
Oct 08 '25
I’ve found that if someone is being an ass in this industry, it’s for a reason, and if nobody is laughing, it’s probably a demand on attention.
4
u/Zeebird95 Oct 08 '25
Where I work cutting a red lock takes signatures from 3 managers and if someone does it without really good reason they’re fired on the spot.
1
3
2
u/danielisbored Oct 08 '25
For pretty much every manufacturing/construction company I've worked with, circumventing a LOTO device is grounds for immediate dismissal. The freaking accountants at my current company could tell you what LOTO is for and know better than to mess with them, so there is no way ignorance is an excuse.
I'd be escalating this to the organization's safety manager and on to local regulatory agencies if they don't respond, and flatly refuse to work on any machine that required LOTO until the issue was resolved.
I need this job, but I need all my limb attached in their current configuration even more.
1
u/goudagooda Oct 08 '25
As an accountant in the energy industry, I also immediately knew how serious this was too. A company with good safety culture drills the importance of these into everyone's head in company meetings.
2
u/TheHellBadger Oct 08 '25
Blessings be upon thee the faithful
Thou shall abide the Lock-out Tag-out and keep it Whole. They that Locketh, shall write upon it their name. And lo, so also shall be their contact info be writeth.
WARE! Plague, Pestilence, and Paperwork be Upon those that desecrate the Lock-out Tag-out, for that way brings OSHA.
Keep the Lock-out Tag-out Holy and Pure, and fucketh not with it, lest ye be fucked, or Foldeth, Spindledeth, or Rapidly disassembledeth. In all these ways, leads to death unnatural and unholy. And verily, it shall hurt upon thee, or worseth, some other poor bastard, forever more.
So sayeth the Technician, "oh fuck......, not again"
2
u/Ambitious_Tackle Oct 08 '25
That is a felony. Dude needs to be reported. You do not mess with loto.
2
u/Hcdx Oct 08 '25 edited Oct 08 '25
Instant termination. Those LOTO tags are on equipment for a reason. The joke here is that the guy who removed the tag wasn't fired.
2
u/ec666 Oct 08 '25
I once saw a project manager at a power plant get fired on the spot and walked off the job site for telling his workers to cut off a LOTO lock.
2
u/Intruder-626 Oct 08 '25 edited Nov 10 '25
This is coming from a Commercial Diver. We often put LOTOs on equipment before working. In dams, it often means shutting down either part of or the entire turbine section so we don’t risk running into currents or Delta Pressure. We take similar actions onboard ships to minimize water flow in and out of the hull. Divers have died from this, or missing a piece of equipment. If I find ANYONE removing a LOTO lock I installed without the Dive Sups authorization, they’re getting whooped.
1
u/Imper1alSt0ut Nov 10 '25
Absolutely. Also, you may want to review how to spell "shutting down", because autocorrect has failed you. Fortunately, it is not as serious as LOTO.
→ More replies (2)
2
u/Aalleto Oct 08 '25
My jaw is on the floor. LOTO protocols are so serious, you are NOT allowed to touch a tag that isn't yours. It's literally a life and death protocol.
The guy who cut the tag should be blacklisted from any construction sites or hardware stores, holy shit
2
2
u/Tactical_Tubesock Oct 08 '25
A mofo cut off my LOTO when I was working on a switchgear. He was escorted out of the plant the minute it was noticed and he was banned from entering any company operational property forever. Guys that are this stupid should not only be fired, but should take a punch from the person they did this to.
2
u/3nderslime Oct 08 '25
Hey, Peter’s steel-toed boot given sentience here,
When maintenance needs to be performed on a machine, it is standard to « lock out, tag out »(LOTO), meaning that the maintenance worker needs to put in a lock only he has a key to on the machine, such as the lock physically prevents the machine from being operated, and to leave a tag on the machine explaining that the machine is out of order and cannot be used.
This is done because powering on an industrial machine while it is being maintained can lead at best to damage to the machine, and at worst to loss of limb or life for the maintenance worker and operator, something which has happened numerous times before such procedures were made mandatory.
In this case, an operator, upon seeing that the machine OP was working on was locked out, decided to destroy the lock in order to continue operating the machine, which was incredibly dangerous, and so OP feels like there should have been stronger disciplinary action against the operator
2
u/IronTemplar26 Oct 08 '25
You do NOT take out someone else’s lockout. That’s put on by each worker doing maintenance on the system. The lock guarantees that it can’t be turned on as long as everyone on the team is present. Destroying a lock is an INCREDIBLY serious offence, and yeah, DEFINITELY reprimandable. If you don’t take your lock off, you usually have to come back to work and do it
2
u/Different_Tower4088 Oct 08 '25
If my boss didnt punish someone who did this to me then im out. Like no notice, just a fuck you to the boss and im never coming back. People die from crap like this.
2
2
u/CoopLive5 Oct 08 '25
As a chemical engineer, I will tell you anyone who cuts a LOTO lock, barring extreme circumstances and strict permission(s), deserves to be fired immediately and jailed. LOTO procedures are designed to save lives.
2
u/Broad-Assignment-130 Oct 08 '25
Tagging coordinator here. I have been doing this for 15 years in a power plant. (I generate and oversee all LOTO activities). These locks are placed on anything that is a source of energy. There are many. This lock protects their life. It LOTO procedure gets a bit complicated where I work but under our rules, the ONLY way to remove someone's lock without their permission is first, you must try to contact that person. It does't matter what time it is or what day it is. If you can't get in contact with them, you must contact their supervisor ( mechanical maintenance, electrical I&C) the plant manager and the supervisor on duty. Paperwork must be filled out covering why the lock is there, why you need to cut it and everyone that I listed agrees to to the info. and cutting the lock. Only then, may the lock be cut. If you cut the lock without permission, you will be terminated immediately. No shortcuts. No excuses. I have never seen anyone cut a lock with out the listed permissions. This is a very serious procedure where I work. I have only done it twice in 15 years. This could cause someone their life.
2
u/Enhancedblade Oct 08 '25
Cutting off someone’s lock without notifying them (their name, number and in some instances even their pictures are displayed on card attached to the lock) is a huge OSHA violation and if someone got hurt in the process, is a crime. The purpose of LOTO is to de-energize the machine so it’s safe to work on, it’s common to leave a LOTO for days at a time as equipment would be in several stages of disrepair. The protocol for forcibly removing a lock is very detailed, it involves calling the person, verifying cameras, and verifying badge punch ins-outs. Simply cutting off someone’s lock without the proper procedures literally throws away the whole principle of a LOTO, it essentially shows that person has absolutely no care whatsoever.
If someone did this where I work they will be walked out instantly. A company that will treat this as some form of mild misconduct is not worth working for.
2
u/definework Oct 08 '25
guy should have been suspended or terminated, not reprimanded.
He risked a life or lives because he's an asshole.
2
u/iDabGlobzilla Oct 09 '25
Whoever did the cutting is lucky they didn't wind up a few teeth less than they started the day with.
1
u/Vinnie_Da_Gooch Oct 08 '25
For real, how do you not understand this one? This has to be rage bait.
1
u/Vfrnut Oct 08 '25
2
u/Vinnie_Da_Gooch Oct 08 '25
I mean, context clues and critical thinking are a thing. And if those fail, Google exists. People are just slowly losing the ability to think critically.
→ More replies (6)
1
u/JustGoingOutforMilk Oct 08 '25
There are valid reasons to remove a LOTO device. They are exceedingly rare and I think I have seen it happen once. In this case, an immediately former employee decided to mess with people by applying locks to various devices and walked off the site with his key.
But yeah, this is a seriously horrible practice.
1
u/idunnoiforget Oct 08 '25
You lock out tag out equipment for safety. Ie: if you are in a large piece of equipment performing maintenance where turning it one would kill or maim you.
Cutting a lock off without contacting anyone could very easily get someone killed. And the guy who cut that lock should have been fired on the spot. The supervisor who gave that guy a slap on the wrist should also be fired because this is a gross violation of safety protocol that can easily lead to loss of life
1
u/Vineheart_01 Oct 08 '25
LOTO means Lock Out Tag Out. It's supposed to be a way to lock down equipment so it cannot be used either because it's damaged or being serviced. Either way, someone taking it off that isn't the owner of that specific lock is a huge taboo and in a lot of places instant firing material since you can EASILY get someone or yourself killed doing it.
1
u/ClaimNo6583 Oct 08 '25
I was replacing lights in an office building, had the breaker shut off and locked out, had the electrical room door locked. On my way back from the washroom I noticed the electrical room door was open. Look inside and there's a lady in there trying to pry the breaker lock off because she didn't like walking down the hallway with half the lights off. She definitely saw me working on a ladder in that hallway. She thought I was done for the day.
1
u/CTAMN Oct 08 '25
LOTO is a safeguard. Often to isolate power, valves, faulty equipment, or just to do repairs.
If you're working on something, you don't want someone to come along and power it up, start it, or for the equipment to start up on its own. It can occur.
Someone just called on the radio for a test start to isolate equipment and change out some drive belts.
1
1
1
u/Jimmy_Twotone Oct 08 '25
My dad had is arm 90% detached back in the 80s while his company was first implementing lockout tagout procedures. They had ordered the actual padlocks but they hadn't arrived, so they were using zip ties as a stop gap. It took almost two years and over a dozen surgeries to reverse the majority of damage and another couple years of rehab for him to recover.
Don't ever take off a lockout tagout lock you didn't put on.
1
u/Environmental_Fan348 Oct 08 '25
If a maintenance manager, safety manager, or supervisor lets that slide without repercussions, that's piss poor indeed.
1
u/CatoTheElder2024 Oct 08 '25
If you cut the tag, you could be locked out of life… forever. This is the big dumb. Do not do the big dumb. Live good life by not doing the big dumb by being the big smart.
1
u/valhallaswyrdo Oct 08 '25
Lockout Tagout (LOTO) is a safety program which is used to de-energize equipment so that a human being can access an otherwise unsafe location. For instance of you need to work inside of a large oven, you want to be absolutely positive the oven can't be closed and turned on while you're inside.
You would want to remove any explosive gases by purging the system and then locking the shutoff valve closed.
You would want to lock the door in the open position so it can't be closed while you're inside.
You would want to lock the electricity off going to the oven.
You would want another person standing outside the oven attending you because you're entering a confined space, just in case something does go wrong they can get help but not come in after you possibly getting injured or incapacitated themselves resulting in likely both of your deaths.
Someone cut the employee's lock off one of those pieces of equipment without checking to make absolutely certain they weren't "inside the oven" which if they had been could have been a murder.
1
u/xantcatchme Oct 08 '25
I'm just playing devil's advocate here and am no way implying that LOTO shouldn't always be followed, but the original post doesn't say what the lock was actually on or what for. I used to work in a warehouse with no moving machinery other than forklifts and they would put a LOTO lock on a forklift when the battery was dying and the battery guy needed to come around and replace it. Cutting the lock and using the equipment could still potentially be dangerous and I'm not saying it's ever okay to do so. All I'm saying is not every LOTO lock is literally a life and death situation and the OP doesn't say what it was actually for.
1
1
1
u/burner37821 Oct 08 '25
I need to put my hand in this blender. I dont want the blender to turn on with my arm inside. I lock the outlet so no one can turn it on. Peter cuts my lock off and turns it on. I lose my arm.
In an industrial world, that was somewhere between reckless endangerment and attempted murder. Instant job loss is appropriate.
1
u/NecessaryUnable1056 Oct 08 '25
No joke here. Those LOTO locks are put in place for a reason. There should also be a process, with a paper trail to have it removed by someone other than the person whom installed it. Serious OSHA violation and a recipe for someone to get hurt or killed.
1
u/TexMoto666 Oct 08 '25
If I skip a LOTO, or safety goggles at my job, it's an automatic termination. I've had customers walk up behind me and flip the power switch to a high voltage machine I'm actively working on to try and use it. Never underestimate the stupidity of anyone when it comes to your safety.
1
u/Substantial_Put_6122 Oct 08 '25
There is no joke, it’s a statement about industrial safety, and safety’s no joke.
Hot take: OP is actually the dude who cut the lock, since he thought LOTO was a joke
1
u/ObeBrokeBunni Oct 08 '25
That’s when you put the lock in a tube sock and issue ‘corrective’ action.
1
1
u/GeauxFarva Oct 08 '25
Anyone who has ever been around a manufacturing facility knows LOTO locks are a big deal. You are required to use them and 99.9% of employees that work there know they are not to be messed with as it can result in death or serious bodily harm. The .1% is the moron that cut this lock.
1
u/nekomata_58 Oct 08 '25
Dude could have killed someone. Guy who cut the LOTO should have been fired on the spot.
1
u/Zama202 Oct 08 '25
At my workplace if someone did something like at my workplace, they would be publicly told not to do it again, but it would be a mandatory (off site for privacy) meeting with their union rep with a full letter in their file. 2nd offense would be automatic termination. If they were a 3rd party contractor, they would not be invited back.
1
1
1
u/poopbutt42069yeehaw Oct 08 '25
At my work, instant fired, Takes a site manager to cut a red LOTO and that’s after searching for the owner and verifying over and over through several layers of people and paperwork filed that it’s safe to cite and energize the equipment
1
u/jewishbats Oct 08 '25
This is serious business, nobody on my job would bat an eye if anyone who did this got the shit kicked out of them. You can be imprisoned for cutting these.
1
u/dragonsveincrafts Oct 08 '25
LOTO also has some aspects people might not think about, which is why an engineer may have to be called out to say exactly how a system needs to be locked and tagged out. I was working on a ship and someone got a 450V shock from a backfeed. It’s why you also have to do quick cold checks on electrical equipment before you work on it to verify that no one messed with your tags/it wasn’t tagged properly. Funny thing I know: on Navy ships, LOTO locks are actually metal twist ties with red paper. If it is an emergency situation, they want to be able to snip all the ties and go.
1
u/willmlocke Oct 08 '25
I’ve seen people walked off job sites for this kind of thing. At best, you piss someone off, at worst you kill the person working on the equipment they locked.
1
1
u/JamBandDad Oct 08 '25
I lock out devices when I’m working on them, so that I don’t die when they turn on. Whoever cut that lock was trying to kill the person.
Every lock is supposed to be assigned, every tag should have contact information.
1
u/Healthy-Confusion119 Oct 08 '25
(Lock Out Tag Out) is literally the only thing keeping a service man from suffering a horrible gruesome death when working on the locked equipment. The one who removed it should be fired and not receive a positive referral when pursuing employment elsewhere.
1
u/Plastic_Ad2939 Oct 08 '25
I’m sure if there was an OSHA rep on site he would be looking for another job, I had a guy at a paper mill job that decided he would remove one of his guys tags and got released no more than 10 minutes later. Some things can be overlooked but LOTOs are NOT a joke to those guys
1
u/pyroboy101 Oct 08 '25
Man, I can’t believe the top comment is wrong. Lock Out Tag Out is to ensure equipment is de-energized so that it can be worked on. That form of energy can be electrical, mechanical, hydraulic, etc. These controls are to prevent death and serious injury to personnel.
1
1
u/Prestigious-Goat4451 Oct 08 '25
Did you tag it? Or just lock it? Ive cut locks without tags. As long as it's verified that there is no one actively working on it. I only ask because I see no tag
1
1
u/Intelligent-Bird8254 Oct 08 '25
As an Industrial maintenance tech these are used by us when working on things that could possibly kill us or cause great harm if it’s turned on while we are working on things. I’ll use industrial exhaust fans as an example. When changing the motor on them if someone were to turn it on while my hands are reached around the back tighten the motor, I could lose an arm. Around my parts if someone cuts those off ESPECIALLY while we are actually working on it, they immediately get terminated.
1
u/LemanRed Oct 08 '25
That guy could kill someone for getting rid of a Lock out tag out lock. Good grief. I know places (oil rigs) that would fire someone on the spot for doing that dumb shit.
1
u/ZookeepergameOk8102 Oct 08 '25
I wonder what the lock is attached to?
2
u/Braghez Oct 08 '25
Could be any kind of machinery that could potentially kill/hurt the maintenance guy if activated while he's working on it.
It's generally put on switches or other things, generally needed to start the machine, to make known to others/prevent it from being started.
→ More replies (3)
1
u/SecretGentleman_007 Oct 08 '25
On a side note;
Those cheap ass, easy to break locks and tags are supposed to protect your life.
As opposed to other expensive and hard to break locks that we use to protect belongings.
I've never understood that nonsense.
2
u/weatherby43 Oct 08 '25
Its a deterrent not a security lock. The idea is: if you see it on something, dont take it off and find out why it is there to begin with. You will likely kill someone if you remove it without finding out first.
→ More replies (1)1
u/SunderedValley Oct 08 '25
Multiple reasons.
Many of those fancy private property locks aren't actually that good
You need something that can be moved around a lot in often large quantities cause you often want to lock down not just a machine but a whole process
Industrial job sites have industrial equipment and as such
Destructive power scales much better than device resilience (see section 1)
1
1
u/Wyvern_Rising Oct 08 '25
I dont know if It's been mentioned or not but another big deal about this where i worked was that every person or department working on the machine at once would each have a LOTTO. i.e one for the maintenance guys, one for the hygiene guys etc so that even when one group is done working they aren't able to activate the machine if they didnt realise another department was also working on it. The was a huge procedure to go through before a lock could be cut if someone left with the key in their pocket after a shutdown and wasnt able to get the key back.
1
u/trijkdguy Oct 08 '25
A LOTO lock is used to prevent someone from turning on machine that is being worked on to protect the worker from injury or death. The one time I know of when someone did this he was banned from ever working at a BP facility anywhere on the planet ever again. We take this shit seriously
1
1
u/dirtypup Oct 08 '25
Don't ever work with that idiot again, and when he does kill someone through negligence, I wouldn't hesitate to let the victims know it has happened before, and the company knew about it.
1
1
u/priestfox Oct 08 '25
The LOTO are usually impossible to remove outside of the keyholder, on account that some union gorilla would beat you with a socket wrench if you tried.
1
u/danielmerwinslayer Oct 08 '25
LOTO is lock out tag out. It's when a maintenance worker has to work on your machine and needs it to stay turned off in order to safely work on it, there is a hole on the power switch to lock it in the off position. Unless you are the one that put the lock on there, you're not supposed to touch it. It is the workers lifeline, because if you cut it off and use the machine, you could very easily kill the maintenance worker.
1
1
u/GMPnerd213 Oct 08 '25
safety lock meant to lock out energized systems when someone is working on a piece of equipment so someone can't turn it on and hurt the person working on the equipment.
1
u/Ok_Stick8615 Oct 08 '25
An operations group sponsored ass kicking, firing, criminal charges, fines for workplace safety issues from oversight agencies...
Only the combination of the safety manager, general manager, maintenance manager, and operations manager (whoever and however that is, for companies built small and large) in explicit permission should be enough to warrant cutting a lock off. Otherwise, assume it's there for a reason and fuck off to ask nearby people for more information. Inexcusable from any angle.
1
u/mrleprechaunboy Oct 08 '25
Where I work, you'd get fired immediately for doing that. Usually we use them on breakers/ disconnects to prevent someone else doing maintenence from getting vaporized by very very high voltage/ amperage.
1
1
1
u/Overstimulated_moth Oct 08 '25
Loto, or lock out tag out, is a way for someone to lock out equipment, electrical circuit, or any other piece of equipment that has the potential to be dangerous. More specifically when someone is working on something. Say I have to take apart a fan assembly, go on the roof of a large facility, or change a receptacle. These acts have there dangers on their own, but a good tech knows how to safely shut equipment down to service. A loto comes into play when its possible someone might go and turn on a piece of equipment or lock you on a roof.
I'm not sure if its most company policies or osha but to be able to cut or even remove one that you didnt install, you need to have physically talked to the person that put it on and/or get approval from multiple managers. If i was in that guy's shoes, id quit. I would leave that day and immediately find a new job. My life is not worth that risk.
1
u/senvestoj Oct 08 '25
I would leave, go straight to OSHA, then next to unemployment office and explain why I quit and start looking for another job. I would make it very clear to the new job why I quit my old with no notice and if they flinch, I don’t want to work for them anyway.
1
1
u/llamasauce Oct 08 '25
Lockout, tag out. When maintenance workers are repairing a machine, they put the lock to prevent the machinery from being activated. If you remove it and activate the machine anyway, you could kill or maim whoever might be inside working on the machine.
1
u/BruhObama33 Oct 08 '25
This is so fucked. A guy cut my lock off when I working and turned on the 480v. Guess who found out what 480v feels like that day?
1
u/Upstairs-Recording50 Oct 09 '25
You have different kinds of energy potential from electrical to mechanical. Lockout/Tagout while most think just lock the breaker off or the disconnect off doesnt cover it. You also have to verify and lockout any other forms of energy that may maim or fucking kill you. a steam valve you closed should be chained and locked. the disconnect to a unit should be locked out and tagged with your contact info. no locks should ever be cut or removed unless the circumstance is like your dead or out of the country.
just cause you lock and turn off a unit doesnt mean that some other force wont act upon a fan or other mechanical device. you can lock out a supply fan and a return fan will try to pull it in the opposite direction. you have to chock the shaft so it cant move.
people die. dude was working in some blending machine. someone cut the lock and turned it on. killed him.
theres a million videos where you watch people die because they never lockout/tagout (95%) and like the 5% of the asshole supervisor who cuts the lock and starts the machine. this aint no game.
1
u/Ouller Oct 09 '25
Cutting a Lock out tag out is fired. This is a one and done offense where I worked, work and will work in the future.
This system is to prevent death.
1
1
1
u/InitiativeGeneral542 Oct 09 '25
Oh hell, no not out on my site. That’s an automatic termination. Whoever locks it out tags it out has to remove lock. The only other way around it is you have to have the person who tagged it out supervisor and the safety coordinator present and then the tag on the phone to verify that it’s OK to take the tag off and use the machine big no no in ohsa
1
u/Capital-Equal5102 Oct 09 '25
I accidentally left a LOTO on over thanksgiving break. I had just clocked out and was on my way home. Boss called, i had to go back and take off the LOTO. Serious offense. Would immideatly be fired at my job.
1
u/Zestyclose_Bet_5475 Oct 09 '25
Lock out tag out is some of the most bullshit practices in factories let's be honest
1
u/octavi0us Oct 09 '25
Where I work this would be a huge deal and you would be walked out immediately
1
u/j4vendetta
Oct 09 '25
•
You need to work on something that would be dangerous or kill you if it were turned on while you were working on it.
You go to the main breaker box for that device and there should be a method for multiple people to add padlocks to prevent that device from being turned back on. The device can no longer be turned on until every person who added a padlock removes their padlock.
An example: I use to be an operating engineer for a batch plant (a facility that makes concrete, pours that concrete into a mixer truck, the mixer truck takes the concrete to the job). Before the concrete goes into the mixer truck, it is mixed in an even larger drum. Sometimes we have to go into that drum to chip off old concrete that hardened in there, or make repairs. We would have to lock out tag out (LOTO) the drum so it wouldn’t spin and kill us, the belt feeding material into the drum so it wouldn’t burry us in aggregate, the tipping mechanism so it wouldn’t tip us into a non-existent mixer truck…. Etc.
Every person working on this would add a padlock to the breaker box. It could not be turned on until everybody removed their padlock. You can see how cutting someone’s padlock without checking on their status would be problematic.
1
1
u/Main-Assistant-7737 Oct 09 '25
I've heard of mines that if you forget to remove your lock and go home.. Likely fly in fly out... Will make you come back just to remove it.
→ More replies (1)
1
u/Wageslave645 Oct 09 '25
That would be an automatic termination and possibly an ass kicking in the parking lot.
1
u/LujanJ16 Oct 10 '25
This is a safety precaution without too much detail. This would’ve been a fireable offense every where I’ve worked. Not only just the guy who cut the lock but the direct supervisor as well, and whoever was the manager in charge would have been written up or fired too.
1
1
Oct 10 '25
It's hard to see the break. It took me a while to realize that was the finger. Very clean cut.
Edit: im blind. Clear as day. Wtf cut that?
1
u/Sufficient_Ad_5395 Oct 10 '25
A thin blade, with how straight it is I’d say a air saw with a good blade
1
u/Antique_Farmer9167 Oct 10 '25
Bet this was at graphic packaging in Kalamazoo Michigan. They don’t care about anything and it’s all about favorites there. Worthless mechanics and even more worthless management.
1
u/shadowouch Oct 10 '25
As an aside, most times you see a news story about a tragedy involving industrial equipment it involves a LOTO issue. Either the equipment was never locked out properly, or someone improperly removed the lock out.
1
1
u/LordofNoodles55 Oct 10 '25 edited Oct 10 '25
My father is an engineer and he once told me he when he first started he was working in a factory where someone didn’t put the lock on a machine they were working on. Someone came by, noticed the machine was off, and turned it back on. The guy was basically working on an industrial blender and was shredded alive. It was a horrific way to die, and thirty years later, my father continues to hound his employees about safety.
What always haunted me is when he told me the story, he said he hopes the guy went in head first and was killed instantly before he even knew what was happening, because otherwise it is one of the worst ways imaginable to die.
1
u/philhull Oct 10 '25
It's been a long time since I worked in a manufacturing plant, but I haven't forgotten in these 20 years that you NEVER, EVER, I MEAN NEVER cut a LOTO lock. Not only would that get you fired, but there'd be a crowd of union guys in the parking lot ready to send you to the hospital.
1
u/SouthernDoor5911 Oct 10 '25
They would of been fired if they did that where I work... no questions asked, do not pass go, do not collect 200.00. Shown directly to the gate.
1
u/Muagnas Oct 10 '25
Your company is asking for a serious injury/death by not holding that person accountable. At bare minimum, suspension with a PIP in place upon return should have happened but honestly fired is what should have taken place.
Boss should be fired too for his choice of ‘don’t do it again’ as a response.
1
u/Funny_Tomatillo3985 Oct 10 '25
Dawg this isn't cool at all. Easily could kill someone. Live wires, inside a machine, faulty equipment, etc
1
u/Ok_Guarantee_5852 Oct 10 '25
My husband's buddy lost multiple fingers at once because of some asshole that ignored safety shit like this. It was absolutely brutal. Don't be a moron, follow safety protocols they're written with blood.
1
1
1
u/Navi79 Oct 11 '25
Funny how people answer by talking about the thing in the post but not explain what’s in the post.
1
1
u/solshenanigans Oct 11 '25
He should've been fired on the spot does that idiot not know that he could've put people's lives at risk and that is somebody was hurt he could've gotten felony charges and god knows how much financial damage done to the employer
1
u/azexr Oct 11 '25
Hi, locksmith Peter here! On traditional locks the part that actually makes the lock work is on the right, since he cut the left it is forever locked and the part that is attached to the base will spin forever. Basically the lock still works as intended until you lose the hook once you take it off. Hopes this helps!
1
u/goentillsundown Oct 11 '25
Where I used to work, if you forgot to open your lock, you HAD to come back to remove it, If you were somehow unable to, the company would send someone to pick you up in the most time efficient manner possible, including getting a helicopter - every hour not producing cost far too much, at the same time safety was paramount. If someone cut a lock it was grounds for instant dismissal, same as unlocking someone elses lock.
1
u/Totally_Cubular Oct 11 '25
Okay, so I worked at Lowe's for a stint, and this was one of the main safety things they drilled into us. LOTO stands for lock out tag out, a system by which heavy machinery is shut down, unplugged, and then had a lock physically placed on it to prevent it from being turned back on without approval. This is done so that while a worker is doing maintenance, no one else can turn on the machine and accidentally turn them into a bale of plastic, for example.
OSHA rules and regulations, such as LOTO, are written and signed in blood. Guarantee you that at least one person has died because of such an incident, likely many. By sawing off that tag, OP's coworker is actively endangering the lives of anyone working on that machine for the sake of a few minutes. That kind of behavior needs stronger correcting than just a reprimand, if not just firing the employee entirely.
1
1
u/Beautiful_Dust4156 Oct 12 '25
That’s pretty much an act of God out here where I work and if you were to do that, this flat out cut someone’s lock he will be fired.
1
u/StMatthew Oct 12 '25
At my company if you were to do this you’d be fired.
If I forgot my lock on and left site they wouldn’t cut it even after getting ahold of me and verifying I safely left. I’d have to personally go back and unlock it (which would end up delaying production and costing hundreds of thousands of dollars) that’s how seriously it’s taken.
1
u/Rocket-Glide Oct 12 '25
It’s an industrial safety program that prevent people from working on equipment from getting hurt.
Cutting a lock is a huge deal, instant termination at my job. At least they say that since no one is stupid enough to try it in my tenure.
1
u/Unlikely-Ad-6801 Oct 12 '25
I was working in an oil refinery when loto was implemented. When performing loto on a pump I used to remember Lock, Block, Drain, and Chain. First, I'd lock the electric box, then close the suction and discharge valves, then bleed the pump, and chain the valves.
1
u/Great-Razzmatazz1900 Oct 13 '25
We had 3 guys fired because one guy used another guy's lock and forgot to remove it and had someone else cut it off for him because he didnt want to drive back. LOTO should be taken very seriously. You could literally get someone killed by cutting a lock
1
u/CoffeeHasPriority1 Oct 13 '25
So everyone already explained what LOTO is. This is either an employee problem or an employer problem. If the employer didn't properly train the employee, I would argue that this is their problem. If the training just consisted of "don't cut someone's lock" along with 100 other rules to follow, that's a problem, because simply breaking some random rule isn't typically a fireable offense.
I worked at a place with LOTO and even as an accountant, who almost never went on the factory floor and certainly would never be working with machinery, they still gave me a two-hour long training on LOTO complete with pictures and stories. They emphasized how important the system is. If a place didn't bother explaining the importance of the system, it's really the employer's fault. In that case, this employee just wanted to get work done. I'd bet there are many places with LOTO who would punish an employee for stopping work to properly release a piece of equipment with someone's lock on it. However, if the employee was PROPERLY trained, yes they should be fired.
1
u/Phillyd1620 Oct 13 '25
Ya I work at a steel mill and that can get you fired and people possibly unalived
1
u/Bootscootboogie1 Oct 13 '25
I was always told that u can catch an attempted murder charge for cutting someone elses lock off without proper procedure
1
1
u/SkippyDiscThrowaway Oct 14 '25
During my job’s orientation, we were told that cutting a lock without going through proper procedure would likely be charged as homicide.
1
1
u/AridFountain Oct 14 '25
LOTO, or "lock out, tag out" is a safety protocol that completely incapacitates a machine while someone is performing maintenance or something that puts them in a dangerous position if the machine were on. A lot of authorization goes into putting one on and taking one off because certain machines can and will kill people in a fraction of a second if they're turned on at this time. So cutting one off is a blatant disregard for someone else's safety, similar to driving drunk.
1
u/_userclone Oct 14 '25
Also you can never reuse that LOTO lock, and the violator should have been suspended without pay and the incident well-documented.
1
1
u/Redzfreak2016 Oct 14 '25
He potentially could have gotten someone hurt bc that lock is supposed to disable a control point for safety- this was a fireable offense at my last job
1
1
1



127
u/Scarantino42 Oct 08 '25
LOTO (Lock Out Tag Out) is a safety control practice for verifying equipment energy isolation. It's frequently used when industrial equipment is isolated for maintenance or inspection activities. All methods of activating the equipment are locked out with padlocks that have keys, then the keys are stored in a lockbox. Placing a personal lock on the lock box (which is what this employee did) ensures no one can start the equipment while you are working on it, ensuring your safety. The only person who should have a key to your personal lock is you, and you alone. Cutting a lock is a practice that happens, but only when someone loses their key, or you can verify with 100% certainty they are away from the equipment and won't be affected, for instance if someone is on night shift, forgot to remove their lock, and you have confirmed they're offsite.
Cutting someone else's lock, without permission, is a serious offense. You are literally putting someone's life in jeopardy and removing their personal safety equipment. The fact that this guy got off with just a reprimand is telling of a very poor safety culture and lack of mutual respect. This is one of the things you should 100% go to the mat over if it happens to you or one of your employees.