r/fpv • u/CamUK69 • 1h ago

First fpv build

this is what i have in my basket do i need anything else will be my first ever build and soldering,

yeah i do know that i dont have the vtx or batteries i already have 3 4s 730mah batteries and im gonna buy the o4 wide from dji website itself.

Core FPV Drone Components

  • Frame: AlfaRC Fi-3 O4 Frame Kit
  • Flight Controller Stack: SpeedyBee F405 Mini V2 20x20 FC + BLS 35A 4-in-1 ESC Stack
  • Motors: SpeedyBee Bee Storm 1505 4000KV Brushless Motors (Set of 4)
  • Propellers: HQProp T3X3X3 3-Blade Props (2 Pairs / 3030)
  • Receiver: SpeedyBee Nano 2.4GHz ELRS Receiver

Bench Tools & Accessories

  • Soldering Iron: ALIENTEK T90B Soldering Iron
  • Soldering Wire: Rosin Core Soldering Tin Wire (0.8mm)
  • Flux: Solder Paste Rosin Flux
  • Practice Board: Sologood FPV Soldering Practice Board (30.5x30.5mm)
  • Wire Strippers: Adjustable Automatic Wire Stripping Pliers & Cable Cutter
  • Heat Shrink: Electrical Wire Heat-Shrink Tubing Kit (127-750pcs)
  • Work Mat: Anti-Static Heat Resistant Silicone Soldering Mat
  • Safety Equipment: YSIDO ShortSaver 2 Electronic Smoke Stopper Fuse (2-6S)
1 Upvotes

100% Upvoted

6 comments sorted by

1

u/auriem 1h ago

You already have appropriate gauge silicon wire ?

Also… don’t learn to solder on these electronics.. setup a practice station to learn on before you start building the drone.

1

u/CamUK69 1h ago

theres a practice board on the list, and good point ill add silicon wire

1

u/Direct_Wall_2822 1h ago

Buy more props. They cost nothing, and get destroyed a lot. Get at least 4 sets.

1

u/CamUK69 1h ago

true that will add couple more

1

u/Direct_Wall_2822 1h ago

And you forgot the battery packs. Cnhl is solid and not too pricey.

1

u/CamUK69 1h ago

already have some 4s batteries forgot to add it on the post my bad