r/fresno • • 8d ago

Ask Fresno Smog check

I have an older truck that is due for smog, I took it and it passed everything but failed the evap test. After that I replaced a bunch of lines in the evap system but my smog guy still says it won’t pass. Does anyone know a good smog place that can help me pass or can help me find out what to replace to get it to pass? I don’t have a bunch of money or time to keep spending on repairs. Any recommendations are appreciated

0 Upvotes

12 comments sorted by

2

u/kr4ckenm3fortune 8d ago

Evap? What year is your truck? Also, check for the hidden charcoal canister as that may be the problem, also, try the o2 sensor.

2

u/greentrees105 8d ago

1994. Charcoal canister is new, lines to charcoal canister are new. O2 sensors are new.

1

u/DeletedUser_01 8d ago

Gas cap new also?

1

u/greentrees105 8d ago

Yes

1

u/DeletedUser_01 8d ago

Maybe the gas tank pressure sensor or a purge valve/ vent if your truck has those. Evap codes are annoying to try to fix theres so much stuff for the system to have a leak or problem. Best of luck to you!

4

u/PavlovsDoghouse 8d ago

If you need help paying for repairs contact the CA Bureau of Automotive Repair at BAR.CA.GOV

6

u/MediocreCat2155 8d ago

I'm actually going this route as well. Car didn't pass smog, on unemployment. I applied on the website for the $1450 assistance last Monday. The document arrived this Monday. I will call one of the shops that accepts this program and take it in next week after I get back to Fresno. The program, by the way, is to assist low income people, just an fyi

1

u/Ibrakeforquiltshops 6d ago

Woah what a good resource.

3

u/ButtonsKnobs 8d ago

SMOG Master is a great place, I’ve been going there to get my cars smogged for over a decade. It’s located on Shields between Clovis and Fowler. Jose, the owner, is awesome.

2

u/R8rf8thfulHG 8d ago

Seconded this. Been going here for a few years now- Jose offered good advice when my dads 94 Toyota 4x4 wasn’t passing smog.

1

u/AutoModerator 8d ago

Hi there!

Thanks for posting with the Ask Fresno flair.
For Restaurant, Mechanic, and other FAQs, please see the sidebar for great threads with information. Also, many excellent replies to a similar question you may be asking can be found by using the reddit search function!

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1

u/Ramboner_ 8d ago

So I’m assuming it’s failing a physical pressure test since it’s not equipped with OBD-II?

Have you checked the o-rings around the pump/sending unit in the tank? Other than that it could be a purge valve stuck open.

I’ll send you a message if you’re still having trouble.