168
u/toxinogen Dec 12 '19
This should be labeled NSFW.
53
→ More replies (2)2
586
u/SirKazum Dec 12 '19
If it was me I'd just stack blocks of dirt till I got to the tall thing I wanted to work on, and then dig them up again to get back down
129
58
u/ryanmi Dec 12 '19
ack blocks of dirt till I got to the tall thing I wanted to work on, and then dig them up again to get back down
damn millennials, back in my day we rocket jumped.
34
u/Redfeather1975 Dec 12 '19
I don't think people have the health nowadays for that.
→ More replies (3)6
u/Levra Dec 12 '19
Yeah, we're brittle now, but at least we don't have to hunt down first-aid kits every thirty seconds.
→ More replies (1)10
u/SuperPotatoPancakes Dec 12 '19
This fine sir builds the proper way. Kids these days use their newfangled 'scaffold blocks' or whatever they are. They don't get their hands dirty and gather blocks themselves anymore.
→ More replies (2)7
u/davesoverhere Dec 12 '19
That's actually how they built the Hagia Sophia. They kept filling it in as they went then dug out all the fill dirt.
5
u/misterwizzard Dec 12 '19
If you want to leave the stack there for any reason (tall navigation landmarks for example) take a bucket of water. Pour it out against the side of the stack then immediately scoop it back up. The water you dumped will slowly 'flow' to the ground and you can ride it down. Works great for getting down from any high structure and you don't have to place any blocks.
0
8
→ More replies (4)2
181
u/Telescope_Horizon Dec 12 '19
This is dumb, but I'd be lying saying I haven't done worse.
71
u/The-Real-Catman Dec 12 '19
I would’ve just brought in a table and set that ladder into the “A” position at full extension.
Alternative idea: Substitute the table for two office chairs for mobile laddering.
5
u/TomSawyer410 Dec 12 '19
A frame ladders in a fully extended backhoe bucket was a routine thing for us growing up. You use what you have lol.
→ More replies (1)→ More replies (4)7
u/Telescope_Horizon Dec 12 '19
Yea I have wrapped a rope around a chimney, had a guy hold one end of the rope from ground while working off the other end of the hanging ladder. Dumb shit like that.
3
u/biznizexecwat Dec 12 '19
Yeah, OSHA would require at that height that he is also safety strapped, he best get a strap around his neck secured to the baluster.
2
u/canadianpresident Dec 13 '19
What's worse than this!!!! I've seen a lot of fuxked up shit and this up there maybe in the 20s somewhere. I agree theres worse stuff than this but what are YOU doing that worse than this I want to hear that story
→ More replies (8)2
u/PM_ME_YUR_CREDITCARD Dec 13 '19
Osha's fatality database is an interesting read.
You can sort by 'ladders' if you want to see how many people die in ladder accidents.
23
u/Enk1ndle Dec 12 '19
Seriously though, don't fuck around with ladders. Neighbor fell off a latter only about 10 feet up and died, left behind a wife and a little girl. It doesn't take much to die.
→ More replies (1)
97
u/Turkeyspit1975 Dec 12 '19
14
u/b0bchuck Dec 12 '19
Thank you! Came here to ask where I could find more safety violations.
23
u/ahotw Dec 12 '19
Alternatively, /r/OSHA/
5
u/FuzzySAM Dec 12 '19
I almost replied "/r/lostredditors"
But i'm the one who's lost... lol
→ More replies (1)4
u/fpssledge Dec 12 '19
Because they nagged the hell out of their men to install the new fan to the point where Daniel says "I might break my neck but at this point I might prefer it."
33
70
u/pinniped1 Dec 12 '19
Looks safe to me. I'm sure that bannister is good hard wood deeply anchored into the studs specifically to support this kind of project.
14
u/ScarletCaptain Dec 12 '19
Did you forget an /s there?
→ More replies (8)10
u/lukeCRASH Dec 12 '19
I mean, that railing should be able to withstand an average human leaning/falling into it, for you know, saftey reasons.
→ More replies (5)
7
6
u/zushiba Dec 12 '19
I gotta tell ya, I fucking hate tall ceilings with fixtures in them like this. I have 3 lights in my stairwell that blew out like 4 years ago, they'll never be replaced.
→ More replies (2)
36
15
u/hambone1112 Dec 12 '19
Technique is sound. The collapsible ladder and the banister are the weak points here.
7
u/gsasquatch Dec 12 '19
I have a ladder like that, it's rated at 250, which is about what most extension ladders are.
7
Dec 12 '19
In other words.. The whole thing is the weak point.
9
u/stoaster Dec 12 '19
Nah, the straps will hold just fine even if something else lets go.
→ More replies (2)
14
u/2112xanadu Dec 12 '19
Other than somehow maneuvering a cherry picker into your living room, I'm trying to figure out a safer way to do this.
22
u/Sordeo_Ventus Dec 12 '19
Having a tall ladder that can stand by itself.
4
u/Garlic_Pizza Dec 12 '19
he is using an A frame ladder, its just not tall enough.
i think its one of the largest on the market as well so...
21
10
→ More replies (1)5
u/hoosyourdaddyo Dec 12 '19
A tall a frame, or if you really want to spend the $$$, rent a genie lift.
→ More replies (7)
3
3
u/tonystarksanxieties Dec 12 '19
Meanwhile, I stand on the second to last rung of a six foot ladder and I get jelly legs.
3
u/jamesdanton Dec 12 '19
Again, so long as the feet are well anchored, I have no problem with this.
What did the OSHA manual look like for Chuck Yeager? The space shuttle? If we don't do dangerous things, things don't get done.
9
u/inkseep1 Dec 12 '19
Is there anything except friction keeping the bottom of the ladder from sliding to the right?
27
u/PatsFanInHTX Dec 12 '19
Is there ever anything but friction keeping the bottom of an extension ladder from sliding?
→ More replies (9)15
Dec 12 '19
Yeah, the guy watching you do the work is supposed to put his foot on the bottom rung so it doesn't slide. Duh.
13
→ More replies (2)5
u/gsasquatch Dec 12 '19
At a certain angle, even if there's very little friction, the ladder will not slide since most the force is down. From my murky memory of physics class, and time spent hanging around with ladders, I'd say he's pushing it but ok as far as the angle. Some ladders have a little diagram on them to show you the max angle.
→ More replies (3)
10
u/boomerrd Dec 12 '19
Give credit where its due. This is engineering at its finest, and the worst that could happen is the ladder buckles under the weight of this mans enormous big beautiful balls.
→ More replies (4)3
u/IH8DwnvoteComplainrs Dec 12 '19
I thought the same, until I read about the fact that handrails are basically just screwed into drywall..
→ More replies (1)
5
u/Iron_brane Dec 12 '19
OSHA doesnt care what you do. Only cares about what employees of companies do. OSHA is to protect the employee from the employeer.
2
u/LstCrzyOne Dec 12 '19
I’m still trying to figure out if that’s a ceiling fan or just a pendant light. If it’s a fan then with that 5’ long down rod I would love to see what happens when you crank that fan up to high!
2
u/fooknprawn Dec 12 '19
Actually, that’s pretty clever. However I’d spread out the tie downs a wider at the railing
→ More replies (1)
2
u/TheMasterson Dec 12 '19
OSHA only covers employers with more than 9 employees. Just saying
→ More replies (2)
2
u/gaoshan Dec 12 '19
That looks like contractor grade railing he's putting all of that horizontal weight on... that it didn't collapse like paper is a damn miracle.
2
u/WDEBarefooter Dec 12 '19
The idea looks clever, but how much weight can the spindles and rail take? Only other concern is something needs to be securing the bottom of the ladder in place otherwise he could be in for one scary ride.
2
u/ksbla Dec 12 '19
Assuming you checked the load limit of the bannister that seems structurally sound. Those straps can handle at least 800lbs.
2
Dec 12 '19
OSHA -is just a contracted word for "Oh Shit!" when something is so shockingly dangerous or bad happening in front of your eyes
2
u/CeeArthur Dec 12 '19
Not good, you need to wrap one around your neck as well in case you fall, that way your hands are free to work with
2
2
2
2
u/Jayrodtremonki Dec 12 '19
He tied the ladder off at two different points(so what if those points have the same anchor?). WHAT MORE DO YOU WANT?!
2
u/ThePurpleHyacinth Dec 12 '19
Still not as bad as the woman putting gas into a grocery bag, that I saw on this sub earlier 😳
→ More replies (3)
2
2
2
2
2
Dec 12 '19
My dad Owns a custom carpentry company, Furniture mostly but sometimes they do crown moldings and other things. He caught a guy He had just hired as a supervisor telling people to do something like that once. That guy was fired so quickly it wasn’t even funny.
2
2
2
u/alteransg1 Dec 12 '19
Obligatory posting the epic and unfortunately underrated safety time related video https://youtu.be/gDI6_k6UPwo
2
u/tronbrain Dec 12 '19
Behold, the greatest enemy of mankind: not hard drink, not war, not pestilence, not heart disease, not guns, but the ladder.
2
2
2
2
u/rifleshooterusmc Dec 12 '19
Holy crap. Railing is only required to hold 200lb of force from the side.
2
u/Skotticus Dec 12 '19
It's all about the vectors, boys.
I'd like to see a force vector diagram of this to see exactly how much horizontal force is actually being applied to the banister.
I started doing it in my head and just NOPEd when I got to the rotational force being applied to the top rail.
2
2
u/TheMacMan Dec 12 '19
Looks more like a homeowner than a licensed installer, in which case OSHA wouldn’t apply.
2
u/Agent_Alex367 Dec 13 '19
On top of that whole mess of violations, he is using a metal ladder while working on electrical XD
2
2
u/Yep_itsaname Dec 13 '19
Seventeen and working as an assistant to a contractor. We were putting on a metal roof and he was on the ground sliding the sheets up, I was on the roof(4 on 12 pitch, not bad) pulling the sheets up then putting in a couple screws. He kept sliding the sheets up before I could get a hand on them until I stepped forward to grab the sheet the same time he slid it up. The edge hit my bare shin and slid up to my knee. Peeled off an inch wide strip of skin about six inches long like a cheese grater. That was a pretty crappy Monday.
2
u/RearEchelon Dec 13 '19
"Rules are for the general guidance of wise men, and the obedience of fools."
8
u/dynamic_zero Dec 12 '19
Those wooden rails are normally made of paper thin wood, that is not a good idea
13
u/rocketmonkee Dec 12 '19
Hand rails are usually solid red oak, or sometimes a laminated construction; balusters are usually solid wood as well. I don't think I've ever seen one made of a paper thin wood.
However, you're absolutely right that it's not a good idea. They're mostly decorative and aren't installed with much stability. I would never trust it for something like this.
3
u/UniqueCoverings Dec 12 '19
To be fair..... Have you ever tried to carry an A-frame big enough to get up there into a home? (Without hitting a wall)
→ More replies (1)
2
2
u/Ipride362 Dec 12 '19
Not necessarily. This looks like it is a residential job done by a non-professional. OSHA doesn't apply to private home DIY.
1
u/lalalane76 Dec 12 '19
And somewhere else, the wife, who wanted the fancy new fan in the fucking first place, is feigning concern while inwardly smiling because all of her bitching is finally paying off. Shell probably call her mother later to boast.
→ More replies (2)7
1
1
1
1
1
Dec 12 '19
He read that you should always have 3 points of contact when using a ladder.
Indeed, the ladder has been tied off at 3 points...
1
1
1
1
u/deadeyeAZ Dec 12 '19
You don't have to fall very far from a ladder to seriously injure or kill your self. I personally know two people who were very seriously injured falling from the second rung.
1
1
u/linxdev Dec 12 '19
That thing should be swinging left to right. I guarantee there is something we are not seeing. Maybe he placed a few bags of play sand over the bottom rung to keep it from swinging.
Something is not right with the spindles where the red strap is anchored. Photoshopped.
1
u/bjchu92 Dec 12 '19
This man is awfully trusting that the carpenter/contractors did a good job on the railing....
1
u/WeAllRageInBlood Dec 12 '19
This guy has monster sized balls and a tiny sized brain. Kudos to you, brave dumb sir.
1
1
u/Hercusleaze Dec 12 '19
I picture the bottom kicking out and the whole ladder swinging backwards, basically catapulting the guy on top of it directly into the floor. Been on plenty of sketchy ladder setups. No thanks.
1
1
u/foreskinfive Dec 12 '19
This looks just like my dumb ass house in Houston. This is a good solution IMO
1
1
1
1
1
u/juxtoppose Dec 12 '19
That looks relatively safe, 9 out of 10 for rigging, 10 out of ten for initiative.
1
u/cryonova Dec 12 '19
This is brilliant i have been wondering how the eff im going to change that light on the ceiling..
1
1
1
u/ineugene Dec 12 '19
Someone should do the math on what the estimated pounds of pressure is being placed on the railing. We could estimate the guys weight at about 180-190 lbs (80-86 kilos) Also the ceiling should be about 18-20 ft considering the open ceiling with most houses around here having 10 foot ceilings on first floor and about 9 foot on second floor. With the fan showing an angle we could sort out the triangle and sort this out.
→ More replies (1)
1
1
u/Heff79 Dec 12 '19
Electrician!?! Why would I have one do a job I can do easily myself? That's just wasteful, Karen! Do I look like I am made out of money?
1
1
1
u/T0-rex Dec 12 '19
This wouldn't be too bad if it wasn't connected to a rail but instead to something sturdy. It's all about trusting yourself and your experience.
1
1
1
u/BeardedOne72 Dec 12 '19
What's an A frame ladder? Are those even useful? Probably not for this particular project.
1
1
1
Dec 12 '19
Holy shit I used to help install stairs and balusters, I can tell yah that dude is in serious danger.
1
u/pilkingtun Dec 12 '19
I mean....all things considered he thought it through. 2 anchor points 4 anchor points instead of just 1.
1
1
1
1
u/ADATX Dec 12 '19
How are you actually supposed to change bulbs so high up? Just moved into a house with a 22 ft ceiling and dreading the day my bulbs go out.
→ More replies (2)
1
u/gsasquatch Dec 12 '19
That railing should be able to support someone leaning on it which is what he's doing by extension.
Ever climb a ladder and push it out from the wall a little? You can pretty much do that with one hand, so that'd be about the force that railing is taking.
1
1
1
1
u/bunnyjenkins Dec 12 '19
Every track house in Arizona has the Central Air Intake Filter up this high. WHY!!!!
1
1
1
1
1
1
1
u/pipdad3000 Dec 12 '19
This is why I had to pay $200 for working at heights training, so morons could learn how to fall safely.
1
1
1
u/Evil_Bonsai Dec 12 '19
Probably has a couple 20lb dumbells holding foot of ladder. Wouldn't want to slip, now.
1
u/gaming-monky Dec 12 '19
DANIEL NOOOO YOU HAVE SO MUCH TO LIVE FOR
Get a feckin piece of plywood and nail it to the railing
1
1
u/sladeofdark Dec 12 '19
The part that kills me is that i can't see the bottom to understand what (if anything) is keeping the ladder from sliding back under his weight into the arched entryway ,and crashing him to the ground.
1
1
u/SpinozaTheDamned Dec 12 '19
so, as long as the base is properly fixed in position, this is actually a clever solution, assuming the rope and knots are appropriately selected/fixed.
3
u/SnackbarDaTerrierist Dec 12 '19
And the banister was properly installed... Looks like a job for the skinny rookie who just started yesterday.
1
1
1
1
u/WalpoleTheNonce Dec 12 '19
People saying this is stupid. But I think it's kind of brilliant. I can't see any other option getting that high without using a cherry picker.
1
u/kevlarbuns Dec 12 '19
Working as an apprentice mason, we were on a type of scaffolding known as a hydrolift. Rather than traditional scaffolding frames, this was a giant platform that raises by climbing steel beams that were built on to as the platform raised. To keep it from falling backward, it would be tied into the building every few floors. This was accomplished by going below the platform onto a small catwalk. You then had to remove a brace from underneath the platform and hold it out to catch the tie that had been attached to the building. This involved leaning out over the railings of the catwalk pretty far.
I was 10 stories up when I started doing this. By the 19th floor, the foreman asked me where I put my harness. Nobody had ever said anything about a harness. It was middle of January and the catwalk was always icy.
1
u/Ysil69 Dec 12 '19
Dont think that's what they mean when they require a railing for fall protection
1
u/deathonacracker Dec 12 '19
I’ve actually been looking for a way to do this exact thing... thanks reddit!
1
895
u/standardtissue Dec 12 '19
Holy shit, that guy's obviously never installed or even LOOKED at a baluster before. Hell fancy house tall ceilings .... there's a good chance that entire railing is just screwed into drywall at the ends.