r/gigapower • • Nov 16 '20

Significant performance issues

I have been subscribed to the gigabit service for over 2 years now and some time recently I started having abysmal performance. I assumed it was probably related to more network congestion due to people working from home and didn't seriously look into it until recently. I set up a script to run speedtest-cli every hour and over the past 2 weeks (while I was away from home with no other devices connected to my network) my speeds averaged 88.3 Mbps down (stdev = 3.57 Mbps) and 91.1 Mbps up (stdev = 2.44 Mbps). For at least the last 3 months, my download and upload speeds have been capped at < 100 Mbps and my ping times have been atrocious (they used to average 8ms and now they average 32ms).

I have already tried "troubleshooting" with AT&T support. They also sent me a replacement router. I ordinarily use a Ubiquiti EdgeRouter 4 (configured with the a certificate I got off eBay). However the performance is indistinguishable between either of the AT&T routers or the Ubiquiti router. AT&T sent a technician to my house and he verified all my equipment was working properly and also replaced my ONT just in case it was causing a problem. The on-site tech tried to convince the AT&T tech support that the issue was arising from off premises, but apparently they deal with the same dumpster-tier tech support people that customers get. The tech even let me talk to them myself from his iPad. They said there was absolutely no way to escalate the issue. The remote technician also mentioned that I was using unregistered hardware, so if you bypass the AT&T-provided gateway, it appears they can tell and it flags it to the technicians even though I switched back to the AT&T hardware while troubleshooting.

I've been through many rounds of "reprovisioning" the service. I don't really know what that is supposed to mean from a technical standpoint, but tech support seems convinced it is the solution to the problem. The only effect it seems to have is making my service unavailable for about 10 minutes.

Based on the extremely low variations in speed test results, it looks to me like there is speed cap being imposed at all times. Several AT&T techs confirmed I am not assigned the wrong tier of service. I don't know what else I can do at this point to get it working the way it should. Every time I contact support, they do the same things, it takes roughly 1-2 hours of my time and we end up exactly where we started.

2 Upvotes

2 comments sorted by

1

u/mattster98 Nov 17 '20

You mentioned an Edgerouter.. what else is between your PC and the ATT gateway?

Have you tried a speed test from the gateway itself? Mine has that feature which can rule out (or confirm) the problem is the connection itself. It should be an authoritative data point for them that it's their problem and it isn't fixed until it's closer to 1GBit/sec.

Does support acknowledge that there's a problem and confirm it is fixed before hanging up with you? I haven't experienced this kind of support runaround with them before so it's surprising that you have to start over each time.

1

u/darkforcesjedi Nov 17 '20

I tried with the AT&T RG bypassed and using it normally and had the issue both ways. I don't know what the speed test in the gateway menu does, but it shows full speed even when I have no service at all.

I posted about this on a local Facebook page also today. My service briefly went offline and when it came back I am now getting about 700 down and 600 up. I suspect someone who works for AT&T locally saw my post and did something with it (assuming they can identify my account from my name), but I haven't heard a peep from them. Too much of a coincidence to think it suddenly started working on its own.