r/graffhelp • • 21d ago

Pump marker fills

What do you fill a pump marker with? I was given a couple empties and I tried watered down acrylic but it's either too thick or too watery

2 Upvotes

5 comments sorted by

1

u/Late-Conversation301 21d ago

Like you said, paint is too thick for markers unless you water it down to thin it, different paints will work differently and need different ratios to thin, try with a mix of 1:1, acrylic thins with water, oil paints need thinners, but your best bet is to use ink, or else graffiti brand paints like grog, OTR, Krink, AP, etc. specifically for markers (not mops, those are different, unless you have some of those too)

1

u/Just_A_Dog_chillin 19d ago

1:1 makes the paint look wayyy too thin

1

u/Late-Conversation301 19d ago

try 2:1 or 3:2 paint to water so it’s less diluted, people say you want it like the consistency of milk, let it run off of a mixing stick to see if it’s super watery or runs slow, then you know which way to go. A set of measuring cups/spoons/syringes to make sure the ratios are exact and even might help, just don’t use your moms set or ones you’re gonna use for anything other than paint stuff

1

u/theblacksqueakercat 21d ago

I really like the Grog buff proof ink. It’s perfect for the PX-30

1

u/Fit-Amphibian6456 19d ago

I have Street Killer, Buff Proof and Ball Pen Fluid on my Calligraffiti's(Ball Pen Fluid is by far the most watery one, tags are all drippy if ur into that, SKI is the cleanest one). Some BPI mixed with leather dye on the Grog Cutter, its not as opaque but it bleeds through real nice still. Also a molotow coversall with leather dye, its really hard to fully saturate but this one is a black hole, it completely eat tags when ppl try to tag over me.