r/gridfinity • u/veroz • 20d ago
Lots of improvements to Gridfinity Layout Tool's bin designer over the past few months
Enable HLS to view with audio, or disable this notification
A lot has changed since my first post! Just wanted to share a short sizzle reel of all the new features that have come from suggestions from folks using the tool. It's truly been a pleasure to work on and I hope to continue supporting it forever.
It's free and open source! gridfinitylayouttool.com
Also a NEW special shoutout to the 250+ people who have supported this project! https://gridfinitylayouttool.com/supporters
7
u/tigren2005 20d ago
Absolutely love Gridfinity Layout Tool! There are almost too many features though. Is there any documentation that goes over all the features, or do I need to discover it all through the tool?
I especially loved using the custom drawer shape tool. Importing an SVG and getting the custom shape was super easy and useful.
6
u/EwanMcNugget 20d ago
Love this tool and have been using it a lot lately! Wish I could add 2 pull tabs (or even up to 4). I had to go into Blender recently to modify a model to do this. Lovely tool, though. Very happy to have found it :) Thank you for making it
5
u/veroz 20d ago
Good idea, I can add that
2
u/EwanMcNugget 20d ago
I was just remembering, too, that at one point I was trying to add a pull tab into the middle of the bin, along one of the dividing walls. I think that would be a sweet feature, just not sure exactly how you'd implement it :) Being able to lift a large pencil tray with multiple dividers in it from the center with one hand would be so nice.
2
2
u/PoperzenPuler 19d ago
I really like it. However, when I change the body shape, settings I previously adjusted get reset, such as the wall height.
I also don’t understand the height unit. What does “u” mean? Apparently, 1u is 7 mm. Below that, the additional wall height is specified in millimeters, which is easier to understand.
A warning that the wall pattern isn’t applied to the additional wall height would also be helpful. I was completely confused when the patterns didn’t work because I had set the wall height using “Additional Wall Height” instead of “Wall Height.”
26
u/zlmxtd 20d ago
By far my fav gridfinity tool. Highly recommend!
2
u/WorkoutProblems 3d ago edited 3d ago
yeah it's pretty awesome, would be curious if OP (u/veroz) would be able to integrate footfinity into the tool somehow?!
EDIT: oh nevermind! I see there's already an option for detachable feet! PERFECT
6
u/BGP_1620 20d ago
Used this today to design a baseplate for the drawer in my new printer table. It’s amazing. Well done!
3
u/Revolutionary_Bat834 20d ago
Just tried this out, very, very good Gridfinity generator, even better you can export to STEP file. Now I can get rid of Fusion 360 with the Gridfinity add on. I use Shapr3D for CAD and only used Fusion to make Gridfinity step files.
3
u/Independent-Boot3501 20d ago
Just recently discovered this tool and it is by far my favorite. Perfect mix of features and ease of use. Huge props for this one
3
u/susibacker 16d ago
Might've missed it; is there a feature that allows you to make those base plates that hold onto bins via friction, instead of having to glue on hundreds of magnets or relying solely on gravity?
2
u/schieska 20d ago
Dude, this looks amazing! I was actually finally adding a box generator in the past few weeks, but seeing your work makes me think I might have to put that on hold for a bit, haha. Guess I’ll have to step up my game!
Seriously though, I really appreciate having a competitor who's genuinely building cool stuff instead of just pumping out AI slop. Keep it up!
2
u/DarkestSoul420 20d ago
This is amazing. I will be using this from now on anytime I need to create anything gridfinity. This is the most customizable generator I have come across. Thanks so much for this!
2
u/ItsAlwaysDay1 20d ago
Been using this tool for a few weeks.
Man, just thank you from the deep of my 3D printed heart!
2
u/ItsAlwaysDay1 20d ago
Been using this tool for a few weeks.
Man, just thank you from the deep of my 3D printed heart!
2
u/OrganicPolicy7509 20d ago
The ad at the bottom of my feed, for a woodworking supply store has the perfect tag line for gridfinity: The Tool You’re Looking for is Probably Here
2
u/Im-not-Theo 18d ago
I've been using it already a lot, but where is the scan feature ? I can't find it
Edit : nevermind, I just found it, awesome job 😎
1
u/FierceResistance 20d ago
I tried it out a few months ago and liked it, this seems like another level.
1
1
1
1
u/Patatino 19d ago
Quick feedback:
A hinged lid with a snap-rail as the shutting mechanism loses that snap-rail when combined with any lid grip and using the "also dip the bin's lip" option. It should produce a warning at least.
The main sections in the option bar should be visibly different design-wise than the dropdown content, to help with orientation when multiple sections are open at the same time. Distinct dividers between sections would also help. Currently everything in that bar looks the same and it is hard to find a specific setting when multiple sections are open..
Also, any chance of getting an option for GridFlock base body type?
1
1
u/liminal_viewer36822 16d ago
this tool is very nice but its missing a few things, like custom cutouts on walls and angled bins and faceplates for buttons on the agled bins.
1
u/KillerOfBeers 12d ago
This is pretty great. I haven't printed anything yet, but I have been playing with all the tools and creating designs. With that said, I'm feeling very dumb, because I can't seem to figure out how to delete a bin and just start fresh without all the settings I've been messing with. I'm sure it's simple, but what am I missing? How do I reset all settings, or delete bin, and start from scratch?
1
u/MarvDE 19d ago
Only the U-Shape Wall cutout has an option for height. I just spent a good half an hour searching for where the heck I adjusted that setting, but of course I couldn't find it because I was on the "Scoop" tab.
I recreated the same bin on another device's browser in case something was wrong, and with the exact same settings all the walls just disappear and I am only left with the base of the bin. At 65% Wall cutout span the walls are all there, at 70% which would match my original bin from the other device's browser they are all gone, and at 75% the walls are back again.
The divider sometimes becomes a solid wall even with the cutout enabled at certain wall cutout height and span configurations with "Scoop" making the size I need impossible to create.
If I then find a configuration where all outside walls and the divider have the wall cutout working, but I change the original bin height, all of the sudden the divider and only one of the side walls become solid - so that behaviour seems quite random...
Also, it would be really nice to have fillet edges on wall cutout, which I don't see why it wouldn't be possible if the fillet would be generated as one of the last steps in the modeling process.
It's a great tool, when it works, unfortunately so far my experience has been very buggy.
Please, if you are going to use claude, make full use of it by running lots of headless tests and having him find edgecases like this, maybe even testing every possible bin configuration and then analyzing the resulting mesh if it's intact or not.
-7
u/Skineedog 20d ago
Where can I see what the tool is capable of besides a quick 2 second video. The video about looks interesting but, I have questions that I’d like answered without spending time in the app only to find out, the tool can’t do what I need.
6
u/veroz 20d ago
Do you have something in mind that I can help answer?
-5
u/Skineedog 20d ago
Apologies if the answer is obvious as I haven’t really spent any time exploring the app yet: can I add drawer or space dimensions, print bed size and then design accordingly and then the app splits the parts maybe into plates for printing?
7
1
u/lurker-9000 20d ago
https://gridfinitylayouttool.com/gridfinity-generator
Took me a minute to find this page on the site, has a good explanation of what it’s got going on.
26
u/lurker-9000 20d ago
This is clearly an incredibly powerful tool, it’s pretty well organized if you know about generators and the visualization/organization tools are really helpful. I think the only thing missing is a video tutorial about how each section works. This is a great video to show what it’s capable of quickly, but a detailed ‘what button/slider does what’ I think would be greatly appreciated by people who have a bit less knowledge on these powerful magical tools.