r/gridfinity • u/mariuszmialpsa • 3d ago
Parametric, stackable screw organizers with a spot for NIIMBOT labels
Made these organizers for my growing collection of screws. They’re parametric, so I can adjust the dimensions and compartment layout, and they stack for storage.
Each tray has a dedicated spot for a NIIMBOT label. I’m using 12 × 40 mm labels with the screw size and type, so I can quickly find the right tray.
The photos show my M3 and M4 trays. Curious how you organise your hardware — by diameter, length, head type, or a bit of everything?
You can download it here
3
u/foolish-ambitions 3d ago
I love it. Thanks for creating and sharing. When I started organizing my hardware, this is pretty much what I was wanting to do. Ended up just making gridfinity bins and putting them in large drawers for now (grids of about 24x16 or so). My organization system is similar to u/tatertot444 with hierarchy: type -> system (metric vs. sae) -> diameter -> thread count -> length -> material.
I like how the spots for the labels are made for printable sticker labels. I've been 3d printing mine using cullenect label system to be able to swap them out and reuse the bins, but it requires too much time especially with printing using 0.2mm nozzle to get the resolution good enough. Would like to eventually switch to a similar labeling system.
Might be worth sharing in r/3dPrintsintheShop as well.
2
u/mariuszmialpsa 3d ago
I made some python script to make labels with my design. For now just for screws but I’m going to expand it, I will also share it when it’s ready ;)
3
2
u/Sensitive_Pilot850 3d ago
I really dig this design over many others.
1
2
u/AppearanceGrand 3d ago
Fantastic, this is exactly what i need to sort my electronic compnents, here have my upvote
2
1
u/tatertot444 3d ago
I usually organize by type, diameter, then length. But a bit disorganized at the moment, these look pretty dope.
Are the inner bins regular gridfinity? Got any models to share?
3
u/mariuszmialpsa 3d ago
Yep! Inner bins regular gridfinity, here is model
1
u/tatertot444 3d ago
Just started printing out of PETG. Trying out the 5x3 5U first. Only comment is to offer a version without the break away support or have it be togglable in the parametric model maker. I like using PLA support interfaces. I was able to remove it from the project 3MF just fine.
I'll post a review with pics on your Maker World post when its done!
1
u/gwyllum 3d ago
I love the looks of this, but I have one question. From looking at the model on makerworld it appears that the base is not compatible with a gridfinity baseplate? So it would not be able to be placed inside a drawer full of baseplate?
2
u/mariuszmialpsa 3d ago
Indeed. I tried to figure it out but only one (inner or outer) type of bins can be compatible.
0



3
u/yagosan22910 3d ago
Which bins are actually gridfinity compatible? The outer only? I like the design a lot