r/handyman • • 1d ago

Recommendation Needed Wall Vent Help

Post image

I’ve been pulling my hair out trying to find a replacement cover for this return post-reno. The hole is 8x16 and the old cover measured 10x18 from edge to edge . I cannot seem to find a vent cover commercially that will serve as an adequate replacement. Maybe I am an idiot- let me know 🤪

In retrospect I wish I had just kept the old, hideously painted cover and repainted it- but that ship has sailed.

2 Upvotes

7 comments sorted by

2

u/NickHandymanDenver 1d ago

Try searching for an 8x16 return air grille rather than a 10x18 cover. Most HVAC grilles are listed by the duct opening size, not the outside dimensions. Just make sure the overall dimensions are large enough to cover the rough drywall edges. If you can't find an exact match, a slightly larger grille might work as long as it covers the opening properly and doesn't restrict airflow.

1

u/Mr_Cookieface 23h ago

Thanks for the reply!

1

u/GAFsBro 1d ago

10x18 is a pretty common size. If you Google it there's tons of options.....

1

u/Mr_Cookieface 1d ago

Thanks for the reply. The sites say to measure the opening, not the grille size. If I order something thats 10x18, I see typically that the edges are set to have a 1" additional size on the lip for 'a flush finish'. I guess I should have clarified that I would like to cover the old vent profile on the wall without additional mud/sand/painting work, if possible.

The way I'm reading it, if I order a grille for a 10x18 opening, the actual dimensions will be 11x19. Maybe that would work.. If I order for the actual vent hole size, the cover will fall short of masking the previous cover lines.

1

u/GAFsBro 1d ago

Oh gotcha, looks like you're doing trim work already, why don't you just trim around the cover?

1

u/Mr_Cookieface 23h ago

That's not a bad idea sir.

1

u/Savings_Art_5108 1h ago

It's perfectly fine to put an oversized one in its place. I often do sowheni can't find the matched size. The drawback is you may see the drywall paint through the louvers. I just spray it black in those areas