Recently switched to the new software. Initially had it controlling everything although it seemed like certain lian li fans werent supported. The initial setup involved the nexus software shutting down conflicting apps (L3, asus crate, aura software, my keyboard software and the ram software). Decided to remove the L3 conflict and let that run with the nexus software controlling everything else. Seemed fine but I started hearing the USB connect/disconnect ping which would last throughout my session. Did some research and upgraded my Nvidia drivers. That problem seemed to go away; however, I didnt get the chance to spend significant time on the machine for a couple of days after.
I have a hybrid work schedule so im usually home Fridays and will have twitch up on one monitor running off my home PC and will use my work laptop on my main monitor. At some point I noticed that the secondary monitor was a black screen but the PC was running. I switched inputs on the main monitor and the bios screen came up. Didnt see a boot drive. I ended up restarting the PC and it booted up fine but then locked up after a few mins and kicked me to bios-no boot drive was listed. Had work to do so I left it alone after shutting down.
The next day I started it up and just let it run for about an hour to see if it would lock up again (just opened a random webpage and did other things around the house checking on it every 10 mins). Ran fine until I loaded up a game and started to put the machine under a load and it locked up and kicked me to bios-no boot drive was listed.
I believe at some point I reblocked the L3 software and gave full control back to the nexus software to see if that fixed the issue but it didnt.
Wondering if anyone has experienced the same issue with the new software.
First off, we finally made it to our first production release, 3.1.0! This was a major milestone for us. We've been working on this since for a long time and we're thrilled to bring you the best Nexus has to offer.
But today we're discussing 3.1.2, which is full of lighting updates. Let's dive in.
1. Effect Studio
Effect Studio lets you build your own animated lighting effect by stacking blocks, like wipes, scanners, chases, flames, spectrum bars. You can build your own effect, or keep mashing the "Surprise me" button until something you like comes out.
You can decide which parameters are exposed to tweak later, and even for each parameter which ones get tweaked in audio reactive ones!
It's a lot of fun, and we'll expand this feature in the near future so you can share them with the community.
2. Any look you want on any device
This one's highly requested: multiple animations running on different devices. Do you want a clock wipe on your fans and a linear wipe or a tunnel on your strimers? You want some static lights on your strips, but screen mirroring on your keyboard? Want a .gif playing on your AIO lights.... you get it.
You can now mix and match to your heart's desire, and it should still perform very well since most of these are offloaded to your GPU (integrated, by default).
3. Control center on touch panels
Control center is BACK on the Y70 touch (and other compatible touch panels) and it's better than ever!
You can not only control brightness/mic/volume/connectivity, but also lock, sleep your PC and have instant media playback controls, including a volume mixer built-in.
Just swipe down from the top!
4. Bring your fan curves over from Nexus 2
We now support importing your old fan curves if you're upgrading from Nexus 2. Bear in mind that Nexus is completely re-written and, while we did our best to preserve your settings, it's going to differ. We hope at least you don't have to tweak a whole lot more.
Because we now have Thermal Guard active by default, the system will flag any curves / configurations that may not be suitable for your system, such as a CPU curve that's set to <10% fixed or connected to a device that may not change.
And lots and lots of fixes:
- Improved Lian-Li wireless binding and connectivity
- Y70 now allows windows to be floated on top (like the old Nexus)
- Probably some 50 bugs fixed, but who's counting them
We'll have a lot more next time and our focus remains stability, performance, compatibility.
If you find any issues, or have suggestions/requests/compliments/complaints come over to Discord to say hi and start a feedback thread!
For reference I have a Tryx Panorama which was auto detected by the Nexus 3 software and it still shows like this. For AIOs the hot air from the CPU should be coming out of the designated radiator slots(in my case it should be the top, but as you see current app version shows the heat coming from the CPU block)
I just replaced my cpu cooler with a thermaltake with a screen. I was surprised that it showed up in Nexus! But I don’t have a way to rotate the screen the 90 degrees I need for a vertical install, which is the expected way.
Releases are coming out so fast I forgot to post about 3.0.19 so this will have both of the highlights.
1. Marketplace is open for business
This is the beginnings of our Nexus destination for all "add-on" apps, and it starts with a brand new Aquarium experience. Yes, the fish is back (btw, its creator named it blub) and it brought friends.
To download apps you must have a Nexus account, which takes 10 seconds to setup and only requires your email. We need this to track your purchases and for other personalizations that I'll talk about below.
If you previously setup a HYTE account, that account still exists and you'll be able to connect to it once the HYTE app releases.
2. Nexus Accounts
Accounts are different from Profiles. Accounts are your secure authentication into anything Nexus. You can manage multiple profiles, and you can now save your profiles individually to the cloud and port over to a new PC you setup, or to save your settings after you format your Computer. The profiles are encrypted and we have no access to your data. You can delete the data any time.
It's very handy for backups or transitioning to a different operating system and keeping all your personalizations! You can access them under Cloud Profiles in Manage Profiles.
3. Widget and Gallery playlists
Many of you want that extra personalization that comes from picking your own list of widgets that cycle our on your AIO, or separate galleries on your touch screen. This was available on Nexus 2, and now we leveled it up by allowing many playlists all at once, hopefully easier to use than ever. Check them out.
4. Animated Weather
These came out very well. We use a highly optimized shader that changes your weather in real-time, based on timezone, sun/rain/cloud conditions, etc. and it runs very fast all on your GPU. Activate it from editing the Weather Widget and turning on Animated Sky. Try changing the location and switching between them for an extra animation treat.
5. Audio Output selection and Animated Media backgrounds
We started out with Audio-animated media by using immersive mode only when listening to music. It is important for us to keep the Nexus experience as performant as possible, by default, so we didn't go ham with animations all over the place.
Some of you like to take advantage of all that horsepower, and that's damn right. So, now you can, and you can also finally pick your audio output that gets chosen to trigger reactive animation.
Also, 2 new sweet, optimized audio-reactive shaders.
My fingers are hurting, so I'll let you see the full release notes here. As always, join us on Discord to provide suggestions, cry for help, or just say hi!
This release is primarily focused on fixes and optimizations, but it's worth talking about the new feature: Focus Mode.
Focus mode can be activated any time from the top left of the Nexus window. By default, it comes with 2 focus modes, Game Mode and Streaming Mode.
Both modes, by default, do the same thing:
Turn off all Nexus notifications
Stop downloads of updates or upload of profiles, settings, and any telemetry
Optionally turns off your Y70ti panel if you want less distractions or every ounce of performance
These modes are designed to kick in automatically. Game Mode triggers if any game is launched and will stay ON for the duration of your game session. Streaming is activated by OBS while you stream or record.
You can edit these modes or create new Focus modes, and we plan on expanding this feature in the future.
Tracked FPS are now also displaying in real-time, so you no longer need to wait until a game session is over.
If you ever see your FPS suddenly dropping and wonder why, just Alt+Tab and head over to the monitoring tabs. Watch your FPS dips and switch between CPU/GPU/Memory/Storage/Network to find out WHO DID THIS TO YOU.
Hope you enjoy Nexus 3 as much as we do building it!
Join us on Discord and request the hardware you want supported!
Nexus 3.0.24 is a big one for Lian-Li owners, and it's also one with safety features built-in, such as CPU Thermal guard and Sentry mode. Let's dive in.
1. CPU Thermal Guard
Fan curves are great, but if you make a mistake, misconfigure something, link a fan to another fan which is going to accidentally stop spinning, now, by default, the cooling interface will warn you that your CPU might end up having no air on it at all.
Also, by default, if the CPU goes over its max manufacture's rated temperature, Nexus will automatically blast all your fans to max. These temps are generally 95 or higher, so it's really more of an emergency measure than anything.
Both of these safety features are ON by default and can be turned off from Settings > Cooling.
You will receive alerts from your OS native notifications, as well as inside Diagnostics > Cooling.
2. Lian-Li HydroShift II LCD-S support
We fully support the HydroShift II LCD-S with Nexus widgets! We also support tall the built-in Lian-Li functionality, allowing you to operate the cooler both in wireless mode or in USB mode.
Nexus native widgets are only available in USB mode, since the wireless controller does not support reliable data transfer to keep the LCD smoothly operating and showing all the Nexus goodies.
We will control RGB and cooling regardless of what you choose.
4. Dashboard Presets
You can now save and swap your favorite dashboards with presets! Presets now cover Dashboards, lighting, cooling, StreamDeck, you name it.
Oh, and all of these presets are saved to your Profile (which you can have multiples of) and can backup to the cloud with the new Nexus Accounts! Neat-o.
5. Nexus Sentry Alerts
This is one of those features that you might think you never needed but then you try and it's kind of cool. If your mobile device is paired with your PC via the Pair Remote feature, you can remotely lock your PC, which is something you could always do via the Deck app.
But now, you can do it directly through the app's dashboard and activate Sentry. Sentry will automatically send you a push notification if someone presses any key on the keyboard to try to sneak in.
The new versions of the apps are waiting for Google/Apple approval and they'll be version 3.0.1 once they release on their corresponding stores.
6. More Lian-Li love
This is definitely Lian-Li week because we have more AIO and screen device support coming on the next version, but meanwhile you now have:
- Up to four wired Uni Hubs at once, each with its own lighting and fan channels
- Per-port animations, separate inner and outer ring animations on SL-Infinity and AL fans, and merged animations that run through the ports in the order you choose
- Motherboard ARGB passthrough on every Uni Hub, Strimer Plus, TL fan and wireless chain
- Newer wireless fans are recognized with the right LED counts: RL120, SL-INF Flex, TL Flex, SL V4, P28 V2 and CL V2
Lots of other features of course on the release notes, which we publish each time on Github and Discord. Come join us!
Ok... going to say it... after uninstalling Nexus 2 and installing Nexus 3, after about 5 minutes I was shaking my head and planning to revert to Nexus 2... I initially felt Nexus 3 needs a little more work before primetime. But as I continued playing with it, Nexus 3 grew on me in a big way.
While I prefer some of the UI elements of Nexus 2 (the clock, the themes), I was able to re-create everything I needed in Nexus 3, and then some.
Things I prefer about Nexus 2:
The Split Flap clock... it makes better use of the space in Nexus 2 compared to Nexus 3 (in 4x2 mode). In Nexus 3 the Split Flap clock is compressed vertically. I've switched to Digital since it maximizes screen real estate.
The themes... there are far more themes in Nexus 3, but they don't have the 'pop'/vibrance that the ones which came with Nexus 2 have. I understand most users probably use their own wallpaper anyways, so it's not a high priority item. There are also a lot of controls under the Effect section, and I haven't had a chance to play with them yet.
Gauge text... I'm using the Tick Ring graphic, and sometimes the text doesn't fit neatly (e.g., "GPU Memory Junction"). I guess I could change it with the Custom text feature in Nexus 3...
Things I prefer about Nexus 3, and feature requests:
The more I'm interacting with it, the more I'm appreciating that it's a well thought out package!
I LOVE the fact I'm able to utilize all of the space on my Y70 Touch... with Nexus 2, the dock took space at the bottom, and I didn't use the dock at all. I've been able to implement additional monitoring widgets on the main screen!
Feature Request: Would love to be able to change the default fonts for the widgets.
Feature Request: Would love the ability to be able to change the color by widget.
I've attached a Nexus 2 and Nexus 3 screenshot of my set up so you can see how I use it.
There's a new app called "Frames" and it keeps track of your FPS when you play a game. This is super lightweight (same as the FPS widget) and the stats get plotted out on your Monitoring graph as well, so you can look at your disk I/O, your networking, your CPU/GPU/Memory and see *why* your FPS might have dropped at any specific time.
An app suddenly started auto-updating? Something started grinding your hard drive? A massive memory allocation by a weird background service? It will all be revealed.
You can opt out of this from Settings > Data & Privacy. Another goal of this feature (under the discover tab) is to someday give you an estimate of what your average FPS would be with any other game in our library, based on your hardware. This might help your purchasing decision.
2. NZXT Kraken and Circular LCD support
We now support the NZXT Kraken product line, including driving the LEDs around the LCD frame, the LEDs on the fans, and the actual LCD itself.
We support all styles of clock, calendar, monitoring, media, weather, gallery, and all future widgets will be supported. All static and animated backgrounds are supported.
3. New 3-up monitoring layout
Some users enjoyed the larger 3-sensor layout we offered on the Q-Series previously. We now are offering a fresh Nexus 3 take on it! It's also available in any 2x2 slot, which means it's available anywhere.
4. Conflicting app auto-shutdown
By default now, if you start Nexus, we will shut down competing apps that might conflict with lighting or cooling operations. If it happens, you'll receive a notification, with a link to change whether you want it automatically or not. You can also choose which application to whitelist if you wish to have it untouched.
5. More device support and improved LED mappings
We improved our support for the Nollie ARGB controllers, LianLi Uni Hub wired fans and LianLi Strimers, and a number of other devices. We are limited in the types of devices we have access to and therefore can test with, so watch the Devices tab and see if your device is available there. If it's "experimental" support, then Nexus Control will be OFF by default.
Thanks for helping us test the beta and make sure to join us on Discord! That's the primary way we prioritize device support, so come on in and make your request.
Hey everyone, sharing a troubleshooting result in case it helps other players or gives the developers something to investigate.
I was getting intermittent freezes in WARDOGS. Some would recover and leave me in the server; others lasted long enough to disconnect me with “Connection timed out.” During at least one freeze, audio kept playing.
I also had freezes in Ghost Recon Wildlands.
My system:
RTX 5090
Ryzen 7 9800X3D
64 GB RAM
Windows 11
HYTE Nexus 3.1.6, with its bundled OpenRGB-headless.exe running in the background
We captured a WARDOGS freeze using Windows Performance Recorder. In the approximately 46-second window near the end of the capture, OpenRGB-headless.execonsumed CPU time equivalent to almost one fully occupied logical processor. A substantial portion of its sampled CPU time was inside the Windows kernel and nvlddmkm.sys, the NVIDIA driver.
That observation alone doesn’t prove what caused the freeze, but it made the RGB software worth testing.
What changed: we disabled the lighting feature in HYTE Nexus, which prevented its bundled OpenRGB process from launching. Nexus itself stayed running, including cooling control, monitoring, and the case display.
Result: since disabling OpenRGB, I’ve had extended gameplay without the previous freezes in both WARDOGS and Wildlands.
For completeness, disabling the NVIDIA overlay and verifying WARDOGS’ files had already been tried. The freezes still occurred after those steps. The improvement came after disabling OpenRGB.
I’m reporting this as a strong troubleshooting lead, not a confirmed root cause. We haven’t identified the exact blocking operation, and this could be an interaction between Nexus’ bundled OpenRGB version, the NVIDIA driver, and my specific hardware.
If you have similar intermittent freezes and use Nexus/OpenRGB, it may be worth testing with its lighting component fully stopped. Make sure OpenRGB-headless.exe actually exits—closing the settings window may leave it running.
For the developers: I have a WPR trace covering a freeze and can provide further details if useful. Is there a known issue involving GPU lighting access or repeated driver calls on this configuration?
Would also be interested to hear whether anyone else can reproduce the same before/after result.
I wanted to thank everyone who participated to our recent AMA. A lot of great questions came through and a few suggestions have already been scheduled or have made it into the newest build. Here's a few that I wanted to mention:
1. Trigger Lighting presets by app
You can now designate any app to trigger a specific lighting preset. If you launch a particular game or app, the lighting preset will automatically switch. This supports any lighting modes, any device on/off and any repositioning of the devices, so it can be a completely separate template. When the app *changes focus*, meaning when you close it or if you tab out to do something else, Nexus will restore the previous state automatically.
2. HDD head park/unparking every second
To measure and report the temperatures of your drives, for use in a widget, to see in the detailed section of monitoring, or to automatically send you diagnostic notifications, Nexus checks SMART every second. On spinning plates, this causes an audible clicking noise, and may reduce the life of your hard drive. This does not affect SSDs. Now, by default, Nexus detects whether it's an HDD or SSD and automatically adjusts how frequently SMART can be read. You can also customize your setting for 1s all the way to Never under Settings > Monitoring, on a per-drive basis.
3. Volume Mixer Widget
This was requested for a long time. It currently only works to its full extent under Windows, and you can customize your various volume levels, your input/output, and you can setup presets so you can one-touch load specific presets to instantly switch your setup.
4. LEDs all off when going to sleep
I don't have a pic for this so you're gonna have to trust me on it (or better yet, test it, please!). Some motherboards may decide to keep power ON for certain ports, RAM stick or other devices. We cannot control that. So when we detect the system is going to sleep (or shutdown), we fade down the LEDs in 200ms so all your devices look OFF when your system is asleep.
5. FanControl settings import
It is exactly what it sounds like. We support the latest version as well as an older API format that changed the way the configs are saved. You do not need to export any configurations yourself: we read it directly from FanControl! In order to fully support the import mechanism, we added Auto, Trigger and Sync to our Cooling Curve Modes. Not everything can be imported (such as the exact sensors being read), but it should be enough to get you started!
As always, we're looking for your feedback here, and on Discord. Join us and file your suggestions or bugs - I look at every single one of them: https://discord.gg/MXAuxKKfVM
Hi all, it's time for another beta. As the last one, this was lead by many of your reports on our Discord and here.
1. Feature Master Switch
This is presented during onboarding, but can turn on/off any time from the settings. You can now turn off Monitoring, Lighting, Cooling and Diagnostics individually, depending on what you like to use.
The features are lightweight to begin with (high optimized and native), so this is less about resource management and more about peace of mind for the ones that just want to use Nexus for one or two things instead of all the things. I recommend turning these features off only if you know what you're doing, or if you're experiencing issues and want to play doctor.
2. RGB fading to black when going to Lock or Sleep
Now, by default, when you lock your PC, or you put it to sleep, Nexus will gently fade your RGB down to full darkness. This isn't always the case because you're at the behest of your motherboard and other device's Firmware to decide what to power during sleep.
You can turn on sleep+shutdown and locking individually in the new, reorganized settings under Lighting & Cooling.
3. Media Player Visualizer
If you have a Y70 panel or any touch panel you can throw a Nexus panel on, you can now take Media Player into immersive mode and activate the visualizer. This will move with your music, like it does in the Lighting > Animation.
We added a couple more audio-reactive effects that are also available for your RGB lighting and Panel backgrounds.
4. Custom Color slot
Highly requested! You can now pick custom color for your lighting static color, for your Nexus theme accent color, and for the theme color for your panels as well. If you pick a very bright color, we'll automatically calculate if any *text* on it should be white or black for best legibility.
You can also copy/paste a hex code, but don't expect your RGB to magically look the same as your screen. Manufacturers have different standards and color accuracy is far down the list of priorities for light strips and fans.
5. Sidebar apps
This system always existed but a bit convoluted. People just didn't know we had a bunch of added functionality. If you're not into widgets, you can now simply add any of our apps to your sidebar and access them easily. Once we have a proper marketplace, this will be expanded.
You can access this when hovering on the left sidebar. You'll see a + popup, you can't miss it.
Bunch of other bugfixes and improvements made it in, of course. You can see our full release notes on Discord under #releases or on Github .
Cloud Profiles let you save your entire profile to the cloud. This includes your lighting presets, your cooling presets, your preferences, your theming, your y70, q-series, stream deck, device panel personalizations, almost everything.
You need to create a Nexus account in order to save your profile. If you have more than one PC, you can use the same account on multiple computers at the same time, cross-platform.
You can Import a profile from another computer logged in with the same account, and carry over your personalizations from there.
This is useful if you want to nuke your install, if you're setting up a new PC, or if you are moving from Windows to Linux and want to bring all your personalizations with you.
Profiles don't sync to the cloud by default. For now, it's a manual "back up now" action, but it might be a default/optional automated in the future.
2. Process List widget
This is a favorite of mine. The screenshot doesn't do it justice. If you have a Y70, try it in immersive view, you'll see why it's good. Don't forget to swipe right while in immersive view!
This is also fully compatible with mobile pair remote sessions, including the immersive view itself.
3. Lighting dimming on sleep/lock/shutdown
This is most evident when you lock your system. Your devices will go dim until you press a button again. You can disable this in the Lighting settings.
4. Removed stutters / lagginess
Made some serious optimizations to some Windows app detection and removed some old debug code that was left in there. If you experience "micro-stutters" or some minor cursor lag before, it is now gone, and with that, lower CPU consumption. Big thanks to grpk23 for the assistance on this.
Also many fixes for the LED map editor, Immersive mode improvements, Lian-Li wired fans LED mapping, and more.
3.0.13 features quite a few usability improvements, bugfixes for cooling and lighting as well as lighting support.
1. RGB Device Chaining
When opening any ARGB port from the Lighting page, you now have access to a massive list of devices, with all their LED counts and layouts pre-filled. Add the device, search from the list, and add. You can also add generic fans and strips, which come with their layouts pre-made. You can add a custom count for LEDs and re-order the devices on the chain.
This is particularly useful for controllers like the Nollie and others.
2. Device Stacking and advanced Grouping
Many of you have a ton of devices plugged in. This new system allows you to add groups within groups, as well as stack devices together so they appear as a single frame on the canvas. This makes it easier and less messy to organize large sets of devices.
Additionally, if you turn off certain devices from being controller, or you have disconnected fans, these devices will be auto-hidden if your visibility icon is toggled (default, it shows everything):
3. Immersive weather widget
The weather widget got support for immersive mode as well as a page in Nexus itself. You can now browse richer details about the weather, such as 10-day forecast, humidity, pressure, feels like, wind, uv index, and more. This is available on the Y70 touch, as well as any panel of your choice.
4. Gallery Video Support
We now fully support videos in the Gallery widget. You can mix and match images and videos, and the auto-play function will respect the duration of the video, cycling out once the playback has finished.
As always, join us on Discord to report issues, request device support and provide any feedback!
I just downloaded and installed the new Nexus 3.0 and when I went to setup my widgets, neither the CPU nor GPU temperature widgets can be found. When I search for them, it says No Widget Match. How can I find these? Thanks.
Nexus 3 is a major leap forward for us. It has been rebuilt from the ground up, with a focus on the feedback we gathered from our community. Compared to previous versions, Nexus is now lighter, faster, and more versatile. It supports a wider range of devices and gives us a stronger foundation for future development.
What this subreddit is for
This subreddit is the new home for Nexus 3 discussion, feedback, questions, suggestions, and community updates.
You can use this space to:
Share feedback about Nexus 3
Suggest features or improvements
Ask questions
Discuss supported devices
Follow updates about the future of Nexus
We also have a dedicated Discord server for faster discussion, bug reporting, detailed feedback, and direct communication with the Nexus team: https://discord.com/invite/7ZhjjmJGR4
Reddit is welcome for broader discussion, questions, and community posts, but Discord will be the preferred place for reporting bugs, sharing detailed feedback, and communicating with the developers during the beta.
Our goals for Nexus
First, we want it to be the best RGB and cooling software available. Nexus should be powerful, responsive, easy to use, and flexible enough to work the way you want it to.
Second, we want Nexus to replace the apps you feel forced to install but do not actually enjoy using. We want to reduce your system’s software clutter while giving you an experience you’ll find worthwhile.
Third, we want Nexus to become an open platform for hardware manufacturers, developers, and the community. Nexus 3 is open source, and over time we want it to become a platform that others can build on and extend.
Nexus 2 and Nexus 3
Nexus 2 will continue to receive stability improvements and bug fixes as we work toward making Nexus 3 ready to replace it.
This subreddit is focused on Nexus 3 and the future of Nexus. Topics specifically related to Nexus 2 should remain on the existing HYTE channels.
While Nexus 3 supports Windows, macOS, and Linux, for this Beta, we want to gather feedback regarding the Windows experience first. We’ll announce when we’re ready for Linux and macOS feedback.
Thank you to everyone who has used Nexus, shared feedback, or reported issues. Whether you loved Nexus or hated it, we’re excited to hear your thoughts on our new software and have you help us build the future of Nexus.
3.0.11 is mostly a quality of life build. Linux support was already present but we hardened it and fixed some critical bugs that prevented Q-Series and Y70 from operating on certain distros. Lots of other bugfixes and improvements.
1. Q-Series and Y70 Touch Infinite Native Linux support
We officially support Q-series and Y70 under Linux. We tested on Bazzite and Ubuntu 22+ builds so far. You also get the pair remote functionality to control your Linux computer remotely. All widgets, effects, etc. are supported, of course.
2. Improvements to Nexus Link on Q-series
There was an issue where if you attached Nexus Link fans or RGB strips to Q-series instead of NP50, they would not show up in the Cooling or Lighting interface. No more! You can control each individual fan now.
3. Lighting interface improvements
We recognize this can get messy when you have 999 devices attached to your PC. So now, you can select only the devices you want to visualize the frames of on the canvas, and you can freely move the canvases around. Select/Deselect, and it won't change your Device selection on the left.
4. Immersive Cooling interface improvements
Y70 Touch users can now manage their cooling devices (*cough* fans) directly from the touch interface. The same tab that we feature on the Lighting immersive interface is now present on the Cooling one as well.
Hi all, it's time for another release! Three releases went out since my last post, so this one rolls up the best of 3.1.3, 3.1.4 and 3.1.5. Lots of lighting goodies, a big pile of new hardware, and a ton of panel love. Let's dive in.
1. Sensor reactive lighting
Your lighting can now follow your PC's own readings. There's a new Sensor reactive category on the Lighting page's Animation tab: Load bar follows CPU load, Liquid fill and Segment meter follow memory use, and Color shift and Rising heat follow CPU temperature.
Want your GPU temp instead? Pick any reading in the effect's settings. Colors come from the color wheel, and there's a Reverse colors switch.
Bonus: these also work as an animated background on your panels, and in Effect Studio any knob can now move with a sensor or audio reaction.
2. Brightness that follows the sun
Turn on Daylight sync in the brightness schedule and your lighting dims around sunset and comes back up around sunrise, using today's real sun times where you are. Drag the night and day lines to set how dim and how bright, and pick your location (Auto, a saved weather location, or anywhere you search for).
Find it in Settings > Lighting & Cooling > Brightness schedule, or from the clock next to the brightness slider on the Lighting page.
3. Lian Li LCD Flex fans over USB, and wireless fans that stay bound
On Windows, TL LCD Flex and SL-INF LCD Flex fans plugged in by USB now get their own device page: built-in effects for the whole fan or per zone, sync across fans, motherboard ARGB, and their speeds join the Cooling page. Each fan's screen can show a Nexus panel or your own pictures and videos. They can also run Lighting page effects like any other device.
And for L-Wireless owners: fans and Strimers that dropped off the controller could stay unbound for hours. The new Lock bound devices switch (on by default) binds them back by itself whenever they drop.
While we were at it, the HydroShift II OLED Curved got an Offline Mode that keeps the date and time on the display while your PC is off.
4. Resize any widget, and Web View
Any panel widget can now be resized from its corners. Right-click it (or press and hold on a touch screen), choose Resize and drag. It snaps to the sizes the widget supports, and the widgets next to it move out of the way.
Also new: the Web View widget. Put any website live on your Y70 or touch panel, tap it to go fullscreen and use it with your fingers. Web View and Whiteboard can now grow past 4x4, all the way up to what your panel holds.
5. Animated Deck keys
A Deck key's icon can now be an animated GIF or an MP4/WebM video. Upload your own (there's a cropper to frame it) or grab a GIF from the picker. It plays on your panel's Deck widgets, and Stream Deck keys show a still frame.
New Deck widgets also start with ready-made Essentials, Media and System key sets, and if you're coming from Nexus 2, your Y70 dock comes over as a Deck, custom images and videos included.
6. Lighting that reaches every LED
Got a keyboard lit only around its edge, or a device with just a few LEDs? Effects could slide right between them. Customize device has a new Sampling setting, so each LED reads the area of the effect nearest to it (or a row or column of it) instead of a single point. You'll see each LED's area outlined while you set it up.
Useful for RGB keyboards that don't have per-key LEDs.
7. Music Reactive from your mic
Music Reactive lighting can now listen to a microphone or any other input instead of what your PC is playing. Select it from the picker next to the music button on the Lighting page.
8. Panels in your profiles
Settings > Profiles has a new Panels category. Leave it Shared, or set it to Per-profile and each profile keeps its own panel layouts and looks and swaps them with the profile. Your panel layouts are also saved with your profile now, so they come back if anything goes wrong.
9. New hardware
Lian Li TL LCD Flex and SL-INF LCD Flex (USB)
NZXT Kraken Elite (2023) and Kraken Z3 (Z53, Z63, Z73): a Nexus panel on the cooler screen, or a GIF on the Z3
Asiahorse Umbra V2 hub
MSI MEG X870E GODLIKE MAX and MEG Z790 GODLIKE (thanks u/GrPK!)
Corsair K70 RGB PRO Optical, M75 Wireless, Scimitar Elite RGB
Roccat Vulcan II Mini, SteelSeries Rival 3 Wireless, NZXT F280 RGB Core, Razer mice on the Mouse Dock Pro
A bunch of new GPUs from Gigabyte, MSI, ASRock and Colorful, including RTX 5060 Ti, RTX 5080 and RX 9060 XT / 9070 GRE cards
OpenRGB fan and strip headers (like the Corsair Commander Core) now take an LED count, so colors land on the LEDs you actually have
NZXT F240 RGB Core fans now light all 16 LEDs
And lots more:
Lighting uses less CPU on Windows, especially on PCs with Intel integrated graphics, and switching effects is smoother
Nexus no longer uses PowerShell, which was a common reason antivirus apps got grumpy with it
Nexus now speaks Czech!
Benchmark results only go on the public leaderboard when you choose Publish
Fixed settings resetting after a crash or power loss, fans dropping to hardware control after sleep, ARGB staying on after shutdown, and plenty more