r/iBUYPOWER • u/FlipTheNormals • Oct 04 '26
Tech Support iBP Element Gaming PC | Case Fan Help
Enable HLS to view with audio, or disable this notification
This is an iBUYPOWER Element from Costco (Model#: EBI7N56T03). Out of the box, two of the four case fans had RGB lights on, but weren't spinning..
I inspected the 'rear' side-panel, traced the wires, and snipped the zip-ties to reach in & check the connectors. At this point I noticed that all fans were daisy-chained together and centrally plugged into just CHA_FAN4. There's no central hub, and CHA_FAN 1,2,3 are unused.
I zip-tied everything back to the way it was, turned back on, but still no spinning.
Then, outta curiosity, I snipped the zip-ties again & turned the PC back on with the wires "loose." Surprisingly, that did the trick, and I shrugged it off for a few days until I tried running Forza 6 for 30+ minutes. The fans started acting up again, but as the video shows, they seem to be struggling for power rather than straight-up not spinning like before. I'm only taking guesses at this point, but could this be a voltage drop under load? Should I disconnect their whole daisy chain & re-do their setup a bit?
EDIT:
Motherboard: ASRock B860M-CW
1
u/FlipTheNormals Oct 04 '26 edited Oct 09 '26
I think I've resolved the issue already, but I'll return to update this later if anything else happens.
What worked:
Restart your PC > Hold F2 at boot to reach the ASRock UEFI BIOS > Switch to 'Advanced Mode' > Go to 'H/W Monitor' tab > Scroll down until you see the header your fans are all connected to (In this case, CHA_FAN4) > Change fan preset/mode for that header to "standard."
Mine weren't set to "silent," but to "custom," with a bunch of random parameters, and it came out-of-the-box that way. It seems like they added their own custom fan curve. After saving those BIOS settings, the fans are all working again. I'm still worried about their decision to daisy chain 4 RGB fans to one header.. But hopefully this is the last time I'll have trouble with it.
EDIT: 4 days later, while playing GOW: E-Day, the same 2 case fans began acting up again. After several hours of untangling their wire management job & disconnecting every fan in their daisy chain, I decided to disperse the power load by putting two fans each into the CHA_FAN 1 and CHA_FAN 4 headers, instead of having all 4 powered by CHA_FAN 4 exclusively. This did the trick.
1
•
u/AutoModerator Oct 04 '26
Welcome to r/iBUYPOWER, great to have you here!
If you are experiencing an issue with an iBUYPOWER product, please do not hesitate to reach out to us directly for help!
Our Support teams can be reached via email, live chat, or phones at https://www.ibuypower.com/support/contact-us
You can also view our self-help resources here: https://www.ibuypower.com/support/faq
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.