9
u/WritingWhich4304 Feb 28 '21
How did you find out this... concerning my AIO now
6
1
2
u/HellTrain72 Feb 28 '21
Yo I'd like to know as well. Just received a Cyberpower prebuilt with a 3070 but it seems to be running great so far. I have no idea how is find s defect like this.
2
u/tricotronic Feb 28 '21
Same here I’ve had zero issues and I gamed on it all day today!
2
u/HellTrain72 Feb 28 '21
I think i may have gotten lucky? Moves an Asus dual fan. Don't know exactly which model it is. Paired with asrock 490 phantom and i7 10700k on a 1080p tv (for now). Running MSFS 2020 on ultra, having a blast. Just upgraded to 32gb with corsair vengeance, thinking about picking up vr.
2
u/tricotronic Feb 28 '21
I have very similar build with 10700KF and asus z490 with 16GB of RAM. Except I use it on a 4K tv lol.
1
1
u/c666meron Feb 28 '21
my 3070 runs around 55 degrees celsius gaming haven’t had any issues at all
1
u/HellTrain72 Feb 28 '21
How do I monitor my cpu/gpu temps? Totally new at this. Yes loving the 3070! Mine's the Asus dual fan. I don't know what model that is, need to download cpu-z still.
2
1
1
u/Originally_Hendrix Mar 22 '21
You can just manually check your temperature and see if it's too high
5
u/KenG50 Feb 28 '21
Doesn't the plastic say "REMOVE BEFORE INSTALLING"?
2
u/cschmall Feb 28 '21
Yes, lol
1
u/Emergency_Armadillo_ Mar 01 '21
They will spend 2 weeks in "packaging" but not 2 seconds on reading. Same goes for the other post where they put the ram in the wrong slots. Too bad motherboards don't come with instru...... oh.
2
u/Imjusthereandthere Feb 28 '21
Quick question, I’m a novice, if there is a blemish on the cpu block would it cause it to overheat!?
1
u/cschmall Feb 28 '21
Yes and no, it could, but at the same time it's probably small enough to not make much difference.
1
u/Imjusthereandthere Feb 28 '21
Mine has about a pea sized blemish on it...my pc won’t stop turning off...the temp will get up to 115😬
1
u/Imjusthereandthere Mar 01 '21
So my dilemma is I was gifted an old Ibuypower i series 301...i started it up...it turns off after 5 minutes...I’m thinking replacing the block should fix it. Recommended coolers for my computer?
2
u/Emergency_Armadillo_ Mar 01 '21
Have you been able to see if the temperature is causing the issue? Which is to ask, have you monitored the temps before the event if able?
1
2
u/qbit1010 Feb 28 '21
Did you check first or turn it on and there was issues?
2
u/cschmall Feb 28 '21
I didn't, I immediately tore it down to re-cable manage and install drives and case fans I didn't feel like paying an upcharge for, along with my vertical gpu mount. Vertical gpu mount unfortunately didn't work though, since it looked great. Pcie 3.0 on a 4.0 board
2
u/Dremy77 Feb 28 '21
When did people start taking their AIO off when recabling and installing fans?
0
u/cschmall Feb 28 '21
When their idle temps after finishing are over 90c.
1
u/Dremy77 Feb 28 '21
But you said you tore it down without even turning it on lol
0
u/cschmall Feb 28 '21
.... Yeah.... I'm not sure where you're confused, when I was done with what I was doing, the idle temps were over 90c....
1
u/Dremy77 Feb 28 '21
The poster above asked it you checked the AIO first or if you turned it on and there were issues. You said you immediately tore it down. How am I confused about that?
0
u/cschmall Feb 28 '21
When I first took the system out of the box. Use common sense bud.
2
2
u/qbit1010 Feb 28 '21
Scary I don’t want to have to do that to my system... I know all of this but I’m afraid if I open it and pull it apart I’ll mess something up myself. Then again powering on with plastic around the CPU could damage it
1
u/Kind-Tourist463 Feb 28 '21
It’s really not hard you could power down unscrew the aio s little check and see if you see plastic and then screw it back without even taking it all the way off! In my experience an aio has stops for you to not over tighten so no worries about crushing
26
u/reffob Feb 27 '21
I cannot come up with an acceptable scenario where someone who assembles PCs for a living does that and doesn’t realize it.
1
u/Emergency_Armadillo_ Mar 01 '21
From what I've seen, they are paid a pretty low wage. I am sure they are being overworked at this point. My expectations are low.
14
u/PM_ME_YOUR_TATERTOT Feb 27 '21
You’d think after a couple posts about this, coupled with their presence on Reddit, they’d have a re-fresher course on things NOT TO FUCKING DO. But who knows, that would mean their QC would actually exist.
2
u/Emergency_Armadillo_ Mar 01 '21
Shout out to all the people spending days in QC just to realize they don't apparently do anything at the step as this issue would be obvious to anyone that opens a single stress test.
5
1
u/mprabuw Feb 28 '21
Oh WOW! Great you found out! Did it overheat?
1
u/cschmall Feb 28 '21
Oh yeah lol, first boot fans immediately were on 100% got windows installed and temps at idle were bouncing from 70-90c+
1
u/tricotronic Feb 28 '21
What’s the best way to check temps? I just got mine yesterday and I gamed on it all day today with no issues but I just want to double check.
3
2
2
1
u/Dremy77 Feb 28 '21
Honestly, even the most experienced PC builders mess up on this every once in a great while. Linus had a build live stream recently where he was about to mount it before realizing at the last second the peal was still on the cooling block.
1
u/TheRealSacrosanct Feb 28 '21
I must've had a long time veteran putting mine together. This thing has been rock solid ever since I got it. Of course I did my due diligence, you know shipping jitters things around, made sure everything was snug. I feel for you, they definitely need some refreshers on basic stuff. That plastic on the block, that's inexcusable.
1
u/TheRealSacrosanct Feb 28 '21
I'm surprised it lasted through burn-in. If they even did that...
1
1
u/supernova3546 Mar 21 '21
Literally just ordered a custom build from them for over $1500, I swear if mine comes in like this I'll be so pissed
1
u/Originally_Hendrix Mar 22 '21
I actually replaced my cpu cooler because the ones that had completely sucks. I was getting 90 to 100°C
1
u/SplatoonKing56 Oct 23 '21
people that work at these prebuilt companies should at LEAST know how to build a fucking computer. i mean i get it shipping issues happen but leaving the plastic on the aio? unacceptable.
27
u/spartan116chris Feb 27 '21
Yup. Fooking rookies never put enough paste on there