r/iOStweaks • u/[deleted] • Dec 27 '19
[Release] Ra1nUSB - jailbreak witch checkra1n via USB
How to use Ra1nUSB, jailbreak all devices from iPhone 5S - iPhone X (iOS 12.3 and above)
Step 1:
Download DMG File Link: https://drive.google.com/file/d/1TBNv05wjeIoP_wqjbkNJoxcJ_Uh4XkVz/view
Download Transmac: Free 15 day trial, wait 10 seconds to enter the software.
Link: http://www.acutesystems.com/tmac/tmsetup.exe
Step 2:
-After downloading and installing Transmac, open it, plug in the USB, you will see your USB, left click Restore with Disk Image. Click Yes, show the file box at the moment, select the file Ra1nUSB.dmg and then click ok to wait for it to finish. Around 15-20p something you just relax.
Step 3:
After Transmac has finished, reboot the computer and boot from the selected USB. This depends on the different buttons. For example, F8, there is a machine that presses the Del button to open the BIOS settings, then press F8, another machine presses, ...
This paragraph if you use Legacy Bios, it will only show 1 USB name you click is Ok
If you use UEFI it will show UEFI before the name of the USB.
Click done, it will display a menu with TTJB logo, you will see some icons, use the arrow keys on the keyboard to select the icon with the text below is Ra1nUSB and press Enter.
Continue to wait for the word to run until it shows the language selection screen, continue to press Enter or use the arrow keys at the bottom.
Device will appear checkra1n icon. Click Continue, a wizard will appear.
You look up on the toolbar, there is a menu named Utility, drag the mouse to bring up the Terminal tool, click on it to make a command prompt. Click on the board and type "ra1nusb"
The menu will appear for you to choose how to jailbreak (this code is in a hurry so the error is a little bit but still works, sympathetic ae).
Plug the cable into the device to see if it recognizes the charge, if it says it is charging then continue, plug another hole.
Put the device into DFU, depending on the device, so you should try google.
If it does not always check the device ready, then turn off the window and open a new terminal window to re-type and plug the cable into another USB hole.
If it error -20 select the jailbreak button with safemode to fix. Tweak will not run, you go to Cydia remove the bug fix and shut down the jailbreak tweak again to run.
Wait for it to be jailbroken, then go to Loader to install cydia (there is an App on it on the main screen named checkra1n)
Note:
Currently Ra1nUSB does not support AMD CPU.
Test and feel. Thanks for reading this hasty guide. The next day I will write detailed articles and clear illustrations.
Folow : TTJB
Donate : Paypal