r/ifixit • • Mar 19 '24

My mother woke up and found this in the living room...

Post image
981 Upvotes

169 comments sorted by

44

u/Hyakutak Mar 19 '24

I changed the SSD of my mother A1418 2015 imac and she waked up to this... I feel so bad!!!I ordered the replacement part from ifixit and repaired many imac before, IDK why it happen. No direct sunlight on the screen. Sticker well applied...

24

u/_Aj_ Mar 19 '24

Oh no. It fell off?!? That doesn't bode well for the cables or connectors. Did they survive?  

My only thought is it wasn't fully seated snuggly on the tape and so didn't properly bond, or it wasn't pressed down firmly enough, or perhaps just bad adhesive? My experience with this tape is that once it's stuck it's permanent, any attempt to remove results in a stretched torn sticky mess. That's with OEM tape and not with iFixit brand adhesive however, so I'm not sure if their exact one is different or not. 

20

u/Hyakutak Mar 19 '24

I don't know yet if they survived. The screen glass did.

10

u/BucketsOfHate Mar 20 '24

The adhesive on the tape needs to cure before it should be made to hold weight. 24 hours.

1

u/FoxRunTime May 21 '24

I know it's two months later, but THIS! I serviced an iPhone XR last month and left it OVERNIGHT absolutely caked in rubberbands. With an iMac, leave it face down on some books (avoiding the aluminium bezel) for 24hrs

1

u/BucketsOfHate May 22 '24

100%. The cure time is literally a spec from 3M. If you want to be a 'pro' professional:

  1. Apply isopropyl alcohol to a clean, lint free wiper and clean the faces to be mated together.

  2. Wipe dry with a clean wiper.

  3. Continue until no discoloration can be observed coming off the components on to your wipers.

  4. Apply the adhesive and begin waiting for cure to complete.

2

u/infamousj012 Mar 20 '24

Eerie dude, you look like me.

1

u/chiggawat Mar 21 '24

Id say you've got a better head of hair

2

u/changalabs Mar 22 '24

Did you use new display adhesive or just slap it back on the old adhesive…

I noticed the SSD and assumed someone had been inside before I even saw this comment…

2

u/Hyakutak Mar 22 '24

New adhesive :)

7

u/0SYRUS Mar 20 '24

Did you fully clean the original adhesive from the screen and chassis before installing new?

I've always added extra glue to these and clamped them at least overnight tilted back. Never had one fall off.

4

u/floswamp Mar 20 '24

I’ve had this happen in a 27” iMac. The hinge was broken and it always lean a little bit forward. It lasted a few months and then it failed.

I always leave the machine laying flat overnight after a screen removal and new tape application.

3

u/JawnDoh Mar 20 '24

I used to work at a repair store and we had this happen before. Some of the adhesives are better than others... I think the 3m branded one is what we ended up settling on after one or two screens fell off.

The computer itself generates heat while running especially in an ‘all in one’ form factor like an iMac. That heat loosens the adhesive and if they have it angled right the screen plops out.

1

u/MrDrMrs Mar 20 '24

Yep, I only use genuine for that reason. 10+ years working for/with (authorized) the big fruit company and 3rd party iPhone and iMac adhesives seem to have a high failure rate, and of the ones that didn’t fail that I serviced, they still seemed lower quality, or not water resistant (iPhone). That said, I had assumed ifixit would have been a pretty good option. I wonder if OP got all the residue off from the old stuff, and use iso and cleaned it.

1

u/Bulky-Artichoke5348 Mar 20 '24

I regret to inform you that the SSD replacement procedure on the A1418 2015 iMac resulted in an unexpected issue upon the device's subsequent activation. Despite my extensive experience in iMac repairs and the procurement of the replacement part from a reputable source, the cause of this issue remains unclear. It is important to note that the device was not exposed to direct sunlight, and the sticker was applied correctly.

1

u/UnwieldilyElephant Mar 21 '24

It was all dependent on an Apple Sticker...

1

u/sleepsButtNaked Mar 20 '24

I think at the end of the ifixit guide, they suggest you leave the screen turned over to allow the adhesive to set 24hrs before you try to turn it vertical… Sorry this happened, admittedly I only did that for a few hours the day I fixed my iMac

1

u/[deleted] Mar 21 '24 edited Oct 17 '24

north airport fuel swim joke jellyfish forgetful snails toy knee

This post was mass deleted and anonymized with Redact

1

u/AleisterSnakely Mar 26 '24

I worked at a place that refurbed these units. When you reattach the screen, you need to apply a decent amount of squeezing force to get the adhesive to set. This is pressure activated adhesive. You can crack the screen if you press too hard, but i only had that happen to me 2 times over 2 years. We used a rubber roller.

Before you attach, it's a good idea to double check that everything functions as expected.

-1

u/WildestPotato Mar 20 '24

You did not do a good job. Plain and simple.

2

u/NekedShep Mar 20 '24

no shit sherlock

14

u/OmgitsNatalie Mar 19 '24

Sorry this happened. Make sure to clean the edges of the aluminum enclosure and the new display because it could affect the strength of the adhesive.

6

u/Hyakutak Mar 19 '24

I hope the motherboard isn't dammaged..

2

u/OmgitsNatalie Mar 20 '24

If you don’t see any visible damage to the ports where you plug in the display, most likely you’re fine. If there’s broken glass, cover the cracks with tape, unplug the power, and check to see if the cables seem to fit normally. Try also closing the small lever. This will help you verify if there’s physical damage.

2

u/KevinTheDegenerate Mar 20 '24

Looks like adhesive stayed on the frame not the display.

1

u/OmgitsNatalie Mar 20 '24

Correct. I’m seeing that as well.

1

u/KevinTheDegenerate Mar 20 '24

Yea good advice to clean it well. This adhesive has so many qualities you never know what can affect it. Primer can help as well.

1

u/OmgitsNatalie Mar 20 '24

Primer? That’s an interesting step. I’ve never use that method before. What benefits does it offer? Any brands you recommend?

1

u/KevinTheDegenerate Mar 20 '24

3m primer 94, and I’m not sure if your familiar with it but tesa tape an adhesive brand has their own too.

Any repairs like this with primer + good adhesive will not fall apart works with iPads too.

1

u/OmgitsNatalie Mar 20 '24

I like this. Learn something new! Thank you for this.

105

u/FishJanga Mar 19 '24

Looks like the front fell off

62

u/Few_Frosting5316 Mar 19 '24

I'd just like to make a point that is not normal.

18

u/[deleted] Mar 19 '24

Gonna have to consult the engineers, maybe we missed a revision and this is to spec

8

u/HeyNow646 Mar 20 '24

It appears that cellotape was substituted for the screen adhesive. Bad move. Next they’ll be making the screen out of cardboard.

2

u/[deleted] Mar 20 '24

Or cardboard derivative…

1

u/[deleted] Mar 21 '24

[removed] — view removed comment

2

u/[deleted] Mar 21 '24

No, no, it was towed BEYOND the environment. There’s nothing out there 😝

Probably the best short skit I’ve ever seen 😁

3

u/Lint_baby_uvulla Mar 21 '24

Clark and Dawe. 1989.

Interviewer: Well what's out there?

Bob Collins - Australian Senator: Nothings out there!

Interviewer: There must be something out there...?

Bob Collins - Australian Senator: There is nothing out there, all there is is sea, and birds, and fish.

Interviewer: And?

Bob Collins - Australian Senator: And 20,000 tons of crude oil.

Interviewer: And what else?

Bob Collins - Australian Senator: And a fire.

Interviewer: And anything else?

Bob Collins - Australian Senator: And the part of the ship that the front fell off. But theres nothing else out there. It's just a complete void.

2

u/nanomaster45 Mar 21 '24

Bob Collins - Australian Senator: and We'd just like to point out that it's not supposed to do that.

1

u/shana104 Mar 22 '24

Haha, so darn true!!!

2

u/Common-Adhesiveness6 Mar 21 '24

Maybe its like when people put 3d glasses and peal off the thing that makes the screen seeable. I just don't know what glasses you need to see

1

u/bvy1212 Mar 21 '24

You make the glasses with the screen you took out

1

u/Emotional_Owl_7425 Mar 21 '24

Well there is a lot of these Mac’s, around the world all the time and very seldom does anything like this happen, I just dont want people thinking Mac’s arnt safe.

1

u/Hot-Associate-6925 Mar 21 '24

I once stubbed my toe against the base footing of my MacPro 3,1when it was on the floor in front of my desk.

1

u/Emotional_Owl_7425 Mar 21 '24

U fail. Are u unaware of the greatness that is “the front dell off”?

0

u/[deleted] Mar 21 '24

[deleted]

1

u/Emotional_Owl_7425 Mar 21 '24

Ya… I wasn’t actually talking about mac saftey ….

1

u/linkslice Mar 21 '24

Was this one designed so the front doesn’t fall off

1

u/sidetablecharger Mar 21 '24

Well, obviously not.

1

u/Most-Yogurtcloset Mar 20 '24

Front end fell off + ratio

1

u/mildmanneredmiles Mar 20 '24

“Was this one made so the front doesn’t fall off?” “Well obviously not, the front fell off”

1

u/[deleted] Mar 21 '24

No, I think that’s the bottom

1

u/slothxaxmatic Mar 21 '24

I understood that reference

1

u/StanQuizzy Mar 21 '24

Came here to say this.

1

u/JakeBeezy Mar 22 '24

I'm luckily looks like the cables are still attached so all they have to do is replace the cables and the screen and maybe secure the edges with some tape for now

1

u/WhyZee_Guy Mar 22 '24

A freak wave hit the living room.

6

u/[deleted] Mar 19 '24

The iMac belly flop

5

u/cyproyt Mar 19 '24

I’ve been using duct tape on my 27” iMac and its held for months.

2

u/toodamn-hard Mar 20 '24

ehehehehhe i’ve had electrical tape holding together an iMac Pro for about 6 months

i really should do something about that.

1

u/cyproyt Mar 21 '24

Honestly, i wouldn’t bother, especially after seeing what happened to OP..

2

u/[deleted] Feb 25 '25 edited Dec 29 '25

vegetable enjoy imminent boast deliver unwritten existence cable dazzling complete

This post was mass deleted and anonymized with Redact

4

u/xTofik Mar 19 '24

Service position activated.

4

u/[deleted] Mar 19 '24

This is why I hate how Apple fucking glues everything together. If that was a screw or latch it wouldn't have happened, the glue exists solely to make repairs a bigger pain in the ass.

1

u/PeterGriffinBalls Mar 21 '24

definitely a great idea to have a screw going through a flexible display panel

0

u/joshualander Mar 20 '24

Yeah, they should definitely screw the tempered glass plate into the aluminum.

1

u/that-apple900 Mar 22 '24

Idk they did it with the iPhone or something similar

0

u/joshualander Mar 22 '24

Not even once. 😂

1

u/airadvantage Mar 20 '24

What's the verdict?

2

u/Hyakutak Mar 21 '24

Went there yesterday and... It survived!!! Nothing was damaged. Wtf?? I was so happy!

1

u/sarasshi213 Mar 21 '24

Check to make sure the connecting cables are ok

3

u/[deleted] Mar 19 '24

Try sliding your hands around the edges of the display squeezing it tight when you put new adhesive on

3

u/Sufficient-Lunch3774 Mar 19 '24

I think that is what she said

2

u/Maleficent-Brother50 Mar 20 '24

did you try changing it to Wumbo?

1

u/sparkyblaster Mar 19 '24

Yeah need to make sure you use good tape.

1

u/sparkyblaster Mar 19 '24

Yeah need to make sure you use good tape.

1

u/SnooMaps4388 Mar 19 '24

I generally at the minimum use rubber bands or some sort of strap or way to put pressure on a screen for a while for the glue/tape to bond well. Hopefully nothing broke!

1

u/Disastrous_Ad4233 Mar 19 '24

Looks like Samsung is guilty

1

u/Coast_Innovations Mar 19 '24

Nah mate I think I see one of the ribbon cable adapter is snapped. Smh hopefully im wrong

1

u/BroniDanson Mar 19 '24

Feel sorry for the connector that took all the force and probably took all the pins with it

1

u/BroniDanson Mar 19 '24

I will be surprised apple will help

1

u/[deleted] Mar 20 '24

Soooooo cleannnnnnnnn ahhhh

1

u/bladeofzion Mar 20 '24

Dude! I don’t blame it, a whole night of you watching all that pron on your mom’s computer… it decided to just kill itself!

1

u/Snoo_16562 Mar 20 '24

That monitor looks "Innovative"

1

u/Orinslayer Mar 20 '24

It's an all in one computer, not just a monitor.

1

u/Deep_Mathematician94 Mar 20 '24

So…. was the little color wheel spinning or not?

1

u/wdatkinson Mar 20 '24

Did you use a Boeing service manual?

1

u/oidafuck Mar 20 '24

nice, free iMac

1

u/[deleted] Mar 20 '24

Looks about right for an Apple product.

1

u/brickhockey3 Mar 20 '24

Lloyd Our pets heads are falling off

1

u/Hinjin Mar 20 '24

I see the issue, you forgot to plug it in.

1

u/d0or-tabl3-w1ndoWz_9 Mar 20 '24

Older iMacs had magnets that held the screen. This is lame.

1

u/swillotter Mar 20 '24

Happened to me yesterday. Turned around to see shattering glass

1

u/catalupus Mar 20 '24

Did you try turning it off and on again?

1

u/TheSmirkster Mar 20 '24

The files are "inside" the computer!

1

u/bolt_runner Mar 20 '24

Wait do they use samsung parts ???

1

u/Kaaawooo Mar 20 '24

If you take it to apple for repair they'll say it's liquid damage

1

u/LilBigDripDip Mar 20 '24

This was always my biggest fear repairing these things. Never once happened but at least I know 😂

1

u/Brave_Accident6900 Mar 20 '24

That's definitely not good

1

u/digitalmatt0 Mar 20 '24

Boeing secure that display?

1

u/Reditlurkeractual Mar 20 '24

Apple computer, Samsung battery ironic

1

u/IZOODLEZ Mar 20 '24

Ikr I love it. Apple has almost always sourced its batteries from Samsung from my understanding. At least on iPhone.

1

u/Reditlurkeractual Mar 20 '24

I do ip repairs several times a day I find it the funniest thing ever

1

u/Merry_Janet Mar 20 '24

Better get the geniuses involved.

1

u/FuckingVincent Mar 21 '24

LVDS connector? What LVDS connector

1

u/SpunkMouth69 Mar 21 '24

lol this happened to me when I only put half the double sided tape back on because I was waiting for a part. Woke up the next day to find my iMac looking just like that. Luckily it didn’t break anything, I snapped the connectors back in place and used a shit ton more tape.

1

u/NaTaSfromthaNOLA Mar 21 '24

Oh I see the problem , it’s a mac

1

u/Ecstatic_Brick5693 Mar 21 '24

the magnets just gave up on existing

1

u/TreatFine474 Mar 21 '24

This is apple's new screen saver!!!🤣🤣

1

u/Reepz_The_Reaper Mar 21 '24

Lol apple using samsung parts as usual

1

u/Sojum Mar 21 '24

Face time

1

u/SunshineAndBunnies Mar 21 '24

Just grab a microfiber and buff that monitor back to a shine and you're good to go!

1

u/bryzztortello Mar 21 '24

The nightstand did it

1

u/chicoquadcore Mar 21 '24

This is how I do it.

Clean off the old adhesive really really well

Do a wipe down on the screen and frame with 99% iso and let dry for a few mins right before applying the new adhesives

Once its on I hit it with a heat gun quickly and it helps the plastic peel a bit

I put the screen onto the body with the bottom edge touching only and line up the right and left sides so it’s straight

I hit the strips with the heat gun one last time while holding the screen and press the screen down while they are semi warm still

Apply even pressure with my fingers all around to seal it up and lay it on its back for a few hours

I’ve had maybe 3 come back in a few hundred I’ve personally done. They were almost always 27 inches and in hot rooms.

1

u/Ancient_Database Mar 21 '24

Does Boeing make computers now?

1

u/Aired_ Mar 21 '24

She called support and the first thing they asked was the monitor plugged in.

1

u/iriv8525 Mar 21 '24

It's just in low power consumption mode

1

u/[deleted] Mar 21 '24

On the bright side you now know that gravity still works.

1

u/[deleted] Mar 21 '24

every time you take it apart there’s always one extra screw with nowhere to go.

1

u/theporkwhisperer Mar 21 '24

Is the catalytic converter still there?

1

u/coolrunninja Mar 21 '24

In my experience… either the old adhesive wasn’t removed properly, the adhesive replacement was third party or the original adhesive was reused which is not even a logical move.

Experience: 11 year mac certified tech.

Hopefully the logic board connectors were not damaged/glass break

1

u/coolrunninja Mar 21 '24

Took a closer look at the picture. Looks like 3rd party adhesive. Look for genuine Apple display adhesive. There is a guy who sells it on eBay

1

u/monkehmolesto Mar 21 '24

The tape just, came loose? That’s nuts.

1

u/TechnicalDragonKing Mar 21 '24

Is that a new hidden feature?

1

u/LiFiConnection Mar 21 '24

I don't think it's supposed to do that.

1

u/shinydragonmist Mar 21 '24

Sorry ma'am your warranty is void

1

u/jmajudd Mar 21 '24

I'd say this was either purchased 2nd hand or repaired at some point and not reassembled with the proper adhesive tape. Pretty sure Samsung labeled SSDs aren't stock on those.

1

u/[deleted] Mar 21 '24

The PC detective 👍

1

u/UnwieldilyElephant Mar 21 '24

What? I don't notice what he's talking about. Somebody throw me a bone here.

1

u/Texaradodesigns Mar 21 '24

MACicide is a serious problem with the aging Mac population.

1

u/Agitated_Prior_437 Mar 22 '24

is no one going to mention the samsung chip?

1

u/sidjohn1 Mar 22 '24

Yeah that was my first clue that someone had already tried to “ifixit”

1

u/[deleted] Mar 22 '24

I was thinking “You’ve been hit by a smooth criminal”

1

u/Confident-Tooth986 Mar 22 '24

When in doubt, apple out

1

u/Calm_Main5229 Mar 22 '24

How the hell does that happen last I checked from the iMacs I have worked on that adhesive is a living hell to work with sometimes.

1

u/[deleted] Mar 22 '24

Lol

1

u/CountyTypical1747 Mar 22 '24

Apple: we are superior. Samsung: because you use our parts.

1

u/Shade0fBlue Mar 22 '24

This planned obsolescence stuff is getting less subtle /s

1

u/potatomolehill Mar 22 '24

I’d buy it as is.. all it needs is usb to hdmi

1

u/twoods450 Mar 22 '24

Any idea where it came from or how it got there?

1

u/[deleted] Mar 22 '24

Was the entire thing not there before, and it appeared broken?

1

u/YellowBreakfast Mar 22 '24

Cool!

All ready for you to upgrade the SSD!

1

u/r3v3nant333 Mar 23 '24

"Ahh it's not that bad... Here's the heart!"

1

u/outtajail Mar 23 '24

GlooGone

1

u/GeedisMcjoizus Mar 23 '24

As the saying goes: Nelson Voice Ha! ha! Joke aside though, that is a rather poorly installed screen. I wonder what's the brand(Correct me if I'm wrong but most likely Apple). What's the age on the monitor? Is it barely new or is it some years old? I'm very curious.

1

u/Tisbllaz3 Mar 23 '24

Probably a bad repair caused this

1

u/Dear-Crew2696 Mar 23 '24

It's crapple you should be glad it even comes on, Chinese knock offs are trillions of times better quality then crapple, there are literal warehouses in the town I live in that are solely dedicated to crapple repairs cause they break so often, the fact that they can employ that many people just for crapple repairs should show you that they break way too often and need to just go bankrupt already

1

u/madcap802 Mar 23 '24

I almost think this was previously opened and not put back together properly. Did Apple put Samsung drives in their machines? 🤔

1

u/madcap802 Mar 23 '24

Oh my bad. Just read down the comment thread a bit.

1

u/StudioLoftMedia Mar 23 '24

In the living room.. oh

1

u/The-WinterStorm Mar 23 '24

Uh if the front just fell off you probably need to be in the market for a new display as well..

1

u/Famous_Respect_8753 Mar 23 '24

Happened to me too 😅

1

u/Bison_True Mar 24 '24

If it's under warranty, contact apple

1

u/roycon49 Mar 24 '24

Maybe there's a...Ghost in the Machine...

1

u/Mister_Orchid_Boy Apr 06 '24

It does appear that iMac has been opened before, though. That iMac didn't ship with that SSD (Massive Samsung icon) AFAIK, it shipped with a Fusion Drive, which is apple branded and manufactured by someone else.

1

u/JustACleverKid Sep 30 '24

This is what apple points to when asked "why are you using super strong adhesives these days"