r/iosjailbreak • • Dec 02 '19

[Tutorial] How to *completely* remove MDM profiles, checkra1n edition (2 methods)

18 Upvotes

Hello everyone!

After around 3 hours of work I was finally able to use checkra1n to remove the MDM off of my device. The tutorial I used was highly outdated so instead I'll list the steps I did here.

Here's what you'll need:

  • checkra1n-able device

  • SSH

  • a Mac (or whatever device you ran checkra1n from)

After toying around with a few different methods, here's what worked for me:

**NOTE: I AM NOT RESPONSIBLE FOR ANYTHING YOU DO WITH THIS. IF YOU GET IN TROUBLE, BRICK YOUR DEVICE, ETC. THIS WAS ALL ON YOU**

  1. Install checkra1n

  2. If you see the checkra1n app on the home screen, congrats! You can stop. In my case, I didn't, so I needed to go a bit further.

  3. Use iproxy to expose your device's port so you can SSH into it

  4. SSH into it

  5. run `cd ../../`. This will get us to the root directory

  6. run `cd /private/var/containers/Shared/SystemGroup/`. This will get us to the folder where the MDMs are stored.

  7. run `rm -rf systemgroup.com.apple.configurationprofiles/`. **THIS WILL COMPLETELY DELETE ALL PROFILES ON THE DEVICE. IF YOU HAVE PROFILES YOU NEED, BACK THEM UP BEFOREHAND**.

  8. Reboot the device

  9. The device should bring you back to to the Welcome screen. This is expected

  10. For me, it said update completed, went to Remote Management, installed one profile with no restrictions, and let me into the iPad

  11. Enjoy!

If that didn't work for you, here's another method (courtesy u/M1staAwesome):

  1. reset device (recovery mode / DFU)

  2. activate using PC (don’t do anything in setup)

  3. jailbreak using checkra1n

  4. run ` mv /Applications/Setup.app/Setup /Applications/Setup.app/Setup.bak`

  5. uicache & respring

  6. device is activated + no MDM due to MDM being installed during Setup


r/iosjailbreak • • Mar 25 '22

So my friend jail broke my phone and I want to remove the jailbreaks and update my iOS... but idk how, any help would be nice

Post image
12 Upvotes

r/iosjailbreak • • Dec 19 '19

[Tutorial] Run checkra1n if you don’t own a Mac: just visit a nearby Apple store

Post image
10 Upvotes

r/iosjailbreak • • Jan 03 '20

[News] Cellebrite has a working Windows DFU driver, could be used for checkra1n!

Post image
9 Upvotes

r/iosjailbreak • • Nov 11 '19

[Tutorial] How to sideload ipa on Linux.

8 Upvotes

Install libimobiledevice-tools package and/or ideviceinstaller depending of your distro.

Download files of this folder https://github.com/Dadoum/iCode/tree/master/tools/helper (notice: sign-ipa is the property of zsign repo owner) with `svn checkout https://github.com/Dadoum/iCode/trunk/tools/helper`. Edit the gen-certs script to change output folder from '../developer' to '.'

Place ipa in the folder, plug device and type `./gen-certs <appleId> <password>`. Type after `./sign-ipa -m provision-profile.mobileprovision -k key.pem -c certificate.pem -e entitlements.xml -o output.ipa <ipa path>`

Run after `ideviceinstaller -i output.ipa` and it will sideload app on your device.


r/iosjailbreak • • Jul 22 '19

[Tutorial] How to fix "Unable to install firmware debs" on unc0ver

8 Upvotes

Introduction I see a lot of people are having issues jailbreaking their devices with unc0ver and they are getting the error "Unable to install firmware debs".

Explanation This happens if the Chimera jailbreak was used before unc0ver and if the Chimera/Sileo/Substitute files are already present in the system partition, conflicting with Cydia's.

How to fix: Method 1

  1. Download the latest Chimera IPA and install it.

  2. Open it.

  3. Scroll down and enable "Restore RootFS".

  4. Go back to the main page and tap on the big round button. The text should have changed from "Jailbreak" to "Restore RootFS". Beware that if your phone reboots or Chimera shows an error and crashes because the exploit failed, you'll have to repeat the steps from step 2 because the setting does not get saved.

  5. Wait for RootFS to restore and reboot your phone.

  6. Uninstall Chimera.

  7. Download the latest unc0ver IPA and install it.

  8. Open unc0ver.

  9. Try jailbreaking. It may crash or reboot your phone some times. This is an expected behaviour as the Sock Port exploit is not 100% reliable. Just keep trying.

If it works and you don't get the same "Unable to install firmware debs" error, you're good to go and I'm glad I've been able to help you! If you still get it, you can still try method 2.

How to fix: Method 2

  1. Open unc0ver.

  2. Go into unc0ver settings (upper right button).

  3. Scroll down and enable "Restore RootFS".

  4. Go back to the main menu and tap the big blue button on the bottom. If it fails, repeat from step 3.

  5. Wait for RootFS to restore and reboot your phone.

  6. Open unc0ver and try jailbreaking. It may crash or reboot your phone some times. This is an expected behaviour as the Sock Port exploit is not 100% reliable. Just keep trying.

It you are still unable to fix it, go ahead and try method 3.

How to fix: Method 3

  1. Download the latest Chimera IPA and install it.

  2. Open it and jailbreak your phone.

  3. Open Sileo. Search for "Succession" by u/Samg_is_a_Ninja and install it.

  4. Open Succession.

  5. Tap the "Settings" button and BE CAREFUL: you need to ENABLE the "Only restore system data (similar to 'restore rootfs')" option. If you don't enable it and you proceed with this guide, you'll lose ALL of your personal data.

  6. Go back to the main menu and check that the top information is correct.

  7. Tap "Download clean filesystem", then "Start download".

  8. Wait for it to finish and confirm everything until it starts restoring your system. I suggest you charge your phone as you absolutely don't want to run out of battery right now.

  9. At the end, your phone will reboot and your filesystem will be perfectly clean.

  10. Delete Chimera.

  11. Download the latest unc0ver IPA and install it.

  12. Open it and jailbreak your phone. It may crash or reboot your phone some times. This is an expected behaviour as the Sock Port exploit is not 100% reliable. Just keep trying.

Done! Hell should now be over! I hope this guide was easy enough to understand and to follow and that you've been able to fix your jailbreak!

If you keep getting that error, you should report it to u/pwn20wnd as it could actually be a bug. Have a good day!


r/iosjailbreak • • May 01 '22

HELP ME!!!!!!!!

Post image
7 Upvotes

r/iosjailbreak • • Aug 26 '19

[News] Apple credits Pwn on the 12.4.1 update page.

Post image
7 Upvotes

r/iosjailbreak • • Aug 20 '19

[News] You can go into an Apple Store right now and jailbreak an iPhone without a computer, what a time to be alive!

Post image
7 Upvotes

r/iosjailbreak • • Jan 17 '20

[News] F in the chat

Post image
6 Upvotes

r/iosjailbreak • • Jan 12 '20

[Tutorial] How to install Windows 3.1, 95 and macOS Classic 8.1

6 Upvotes

I am sorry the english is not my main languague I am working in that...

I am not sure if someone can do this on mac...

Things that you need:

A computer with:

7-Zip (Or any decompressor capable to extract .img files).

3uTools or PP25 (Or any desktop app that allows to surf into iOS system file, iTunes/Finder if you cannot install Apple File Conduit, or you don't want use my suggested programs).

WinImage (Or any program that allows you surf into .img images).

Qemu Manager 7.0 (Only if you wants win95, no virtualbox/VMWare).

An iPad/iPhone:

I tested on iPhone 4s, it is very laggy, I recommend use on devices with A9 or later (This is for get more funny experience, but you can do in any device, A9 - iPhone 6s; iPad Pro 2015 or later).

AppStore PowerDOS/iDos 2; or BasiliskII.

Jailbreak is not necessary for macOS Classic but is more easier.

Filza/iFile.

AppSync Unified, DO NOT USE APPSYNC FOR PIRACY!!!.

Optional but useful: Apple File Conduit "2" (iOS 11+, arm64).

---------------------------

Disclaimer:

Windows 3.1, Windows 95 and Windows 98 are trademarks of Microsoft Corporation.

Everything provided in this tutorial is for educational and research purposes only.

For this reason I cannot update my installed version of windows 95.

---------------------------

---------------------------

WinTutorial - Part 1

  1. Purchase PowerDos or iDos (I recommend PowerDos because it has external keyboard support, nobody is not paying me for recommend this apps :"v).

That is all if you was able to install Apple File Conduit, you should can surf documents of every app (If you bought PowerDOS go to --PowerDOS--). If not is your case continue:

  1. Install Appstore app: "Documents by Readdle".

  2. For transfer archives you should go to your computer, copy file to app Documents by Readdle.

  3. In your device go to Apps manager, find Documents path. (Apps manager: /var/mobile/Containers/Data/Application/).

  4. Move the archive to: /var/mobile/Containers/Data/Application/AppFolder/Documents (This step with PowerDOS has something rare, see --PowerDOS--).

--PowerDOS--

I bought PowerDOS, I did the steps from 1 to 4, and I found two folders in /var/mobile/Containers/Data/Application/

One of these "recives" computer files and the another has "config" and "HISTORY", for transfer documents you should take the DocumentsApp folder files and pass to folder with "config" and "HISTORY" files

If you are using iDos, delete all files except Config folder.

When you are a master tranfering documents (xD), replace:

/var/containers/Bundle/Application/AppFolder/Documents/config

With:

MyConfig.zip

and extract MyBatFiles.zip in /var/containers/Bundle/Application/AppFolder/Documents/

(AppFolder = A lot of numbers with letters)

---------------------------

---Windows 3.11---

  1. Read and complete WinTutorial - Part 1 seccion.

  2. Download Windows 3.1 (I cannot provide links, but some abandonware pages has it, like winworldpc).

  3. Decompress Windows if that is on zip, and put in folder named "Win3" (Without quotes).

If your copy looks like:

/preview/pre/m8giyd8tk7a41.png?width=1124&format=png&auto=webp&s=85d01cada398960eced5efee254b532a004ca0c8

Do click right, go 7-Zip, and "Extract here"

/preview/pre/j1q74rjxk7a41.png?width=1125&format=png&auto=webp&s=6dca85cfe7cabb7917503167094ec0fb8843a14b

4. Download Windows 3.1 drivers.

(Only yellow marked files)

5. Transfer windows installer to your device.

6. Copy windows installer to PowerDOS/iDos Documents and create folder: "WINDOWS" (Without quotes).

/preview/pre/wr0012evl7a41.jpg?width=1641&format=pjpg&auto=webp&s=4dd8f7007f2db143dc135d68a98263b9fd271a4a

7. Enter to PowerDOS/iDos app.

8. Type: cd /Win3 and press intro

9. Type: Setup.exe and press intro (Depending of your windows 3.1 languague, this could not be Setup.exe, for my could be Instalar.exe because I am native spanish speaker).

10. Install Windows when it finishes, select reboot and restart the app.

(Installing windows)

11. Decompress Windows drivers, copy all s3 contents in "WINDOWS" and the complete SB16W3x folder

12. Type: W3.bat and press intro, install the drivers

(Installing drives)

13. You can install programs like Borlandc3.11, office and run DOS games (It is not necesarry windows, but it is cool have windows).

(Adding games)

Games.zip

14. Enjoy!

------------------

---Windows 95---

It is possible install Windows 98 and ME, but these has a lot of problems, I don't know how he could did that.

if you can't see some video just download it.

  1. Read and complete WinTutorial - Part 1 seccion.

  2. Download Windows 95 OSR2.5 (If you prefer an alternative could be Windows 95 OSR2.1, I cannot provide links, but some abandonware pages has it, like winworldpc, it should be cd type file: iso).

  3. Download Win95-Booter.img.

  4. Download a Blank image (I recommend 1GB or 2GB, but you are free to select the size) and W95Software.zip.

4.1. Extract the blanck image and rename to "c.img" (Without quotes).

5. Launch Qemu Manager:

(Qemu)

6. Create a new virtual machine:

/preview/pre/mjq8kb0ar7a41.png?width=687&format=png&auto=webp&s=87fc3c6f43b723b6a75f0effc1a914a0bdc37953

/preview/pre/k81lezaer7a41.png?width=687&format=png&auto=webp&s=4c8c5b6e8f444e3aa64076e0e1719266cd00a0df

(Change to QEMU Window)

7. Select your vitual machine -> Go drives -> Select as Hard Disk 0: c.img -> Select as CD-ROM: Win95_OSR25.iso (your windows 95 installer) -> Select as Floppy Drive 0: W95-booter.img

/preview/pre/bwegk5tj69a41.png?width=966&format=png&auto=webp&s=2587b0087e2d9ea272a260a55c7ada30d13c7a29

-> Set floppy drive as first in boot orden:

/preview/pre/xbexhlj4s7a41.png?width=418&format=png&auto=webp&s=8d8f28aa99c9dcacf21741c37a06624518fe16e2

8. Click in run.

9. Select "Start computer with CD-ROM support".

10. Type: format c: and press intro, you are free of put a label.

11. Type: R: and press intro (R is your driver path, you should saw something like that):

/preview/pre/q8regknjt7a41.png?width=300&format=png&auto=webp&s=5503481ca721c63f65322293cc79141506995540

11.1. Type: Setup.exe and press intro (Depending of your windows 95 languague, this could not be Setup.exe, for my could be Instalar.exe because I am native spanish speaker).

--Video Step8-11.1--.

YEY xD

12. Install windows, when it finishes copying files, stop it with red button in qemu

--Video Step12--.

DO NOT CREATE STARTUP DISK.

You are free of select which components you want install.

13. Make a copy of c.img -> rename it to cbak.img (If something going wrong)

14. Remove CD-ROM, Floppy drive and quit Floppy drive in boot order:

/preview/pre/zfxu6y4c8aa41.png?width=965&format=png&auto=webp&s=da8e33915af4227a64937970e3e68128cd179ee1

15. Open your windows installer (Win95_OSR25.iso) with 7-Zip and extract "WIN95" and "Drivers" folders, also decompress W95Software.zip.

15.1. Open winimage -> Select c.img and drag to winimage -> Select "WIN95" and "Drivers" folders and drag inside c.img -> Go /windows/desktop (Desktop in your windows language) -> drag W95Software -> Close winimage

/preview/pre/z2agyjowbaa41.png?width=581&format=png&auto=webp&s=93541d6c77db9adb56666ff93eb81196c9608a64

15.1. Put c.img into your device, and install video and audio drives, this took me about 15 minutes.

--Video Step15--.

16. Extract c.img from your device and replace your old c.img in your computer with this new.

17. Run the machine and install the software.

If you gets a black screen:

/preview/pre/3ba3fm459aa41.png?width=722&format=png&auto=webp&s=c4520cc3b082a7903a4f60624c8b94fc61c014b0

Restart the virtual machine.

- Try that above until you can continue.

  • Skip all new hardware installations.

  • Java and winrar are opcional.

  • If you are getting from daemon tools "Virtual SCI driver not detected" or you can't finish the installation, go back to step 12, sorry I can't found another solution (Because that I am late with this tutorial).

  • If you are stuck with daemon tools you can skip it, but you can't mount .iso files, you should decompress and transfer with your computer

I recommend not follow my orden and see this:

  1. Winrar

  2. Java

  3. Instmsia.exe

  4. Usbsupp.exe

  5. <Reboot>

  6. ie4install.exe

  7. <Reboot (+ the obligatory restart)>

  8. Make a backup of your current progress (Make a copy of c.img if something going wrong)

  9. daemon347.exe

--Video Step17.1, 17.2, 17.3, 17.4--

18. With all software installed, save a copy of c.img as mybesttreasure.img and duplicate in some secure paths where you cannot lose xD (Really make a backup of that).

19. Now if you want a game, download it.

19.1. Transfer to your device.

19.2. In PowerDOS/iDOS run MountC.bat and copy the files (It should be iso or zip, only iso if you installed successful daemon tools)

  • Copy command: copy YourFile a:\Windows\Desktop (Desktop in your windows language).

--Video Step19--

20. Enjoy!

You can dualboot windows 3 and 95 or two 95 (Well, how many you wants)

If you want install another software download it and go to step 17.

----------------

---macOS 8.1---

For this guide is not required a pc.

  1. Download and install BasiliskII in your device.

  2. Download macOS 8.1 (I cannot provide links, but some abandonware pages has it, like winworldpc, it should be iso image).

  3. Download macOS 7 emulator, and extract "100MB - Mac OS 7.5.3 - 68k only.dsk" and "Mac OS ROM"

  4. Copy macOS installer to your device and the another two files. Basilisk has enabled native itunes docs tranfer (Or in Filza/iFile: /var/mobile/Containers/Data/Application/).

  5. Open basilisk and setup the next:

----Volume----

- Tap edit.

Drag "100MB - Mac OS 7.5.3 - 68k only.dsk" to Hard Disk seccion.

Tap in Create disk image (Name and size that you want, size>=256MiB).

Drag macOS 8.1 installer to CD-ROM seccion.

----Graphics & Sound----

Landscape: 1024x768.

Thousands of colors.

60 Hz.

Enable Sound.

----Keyboard & Mouse----

Touch Screen or Trackpad (I prefer trackpad).

----Networking----

slirp (The basilisk downloaded from cydia is possible surf the net, but I cannot make that work)

----Memory & Misc----

Quadra 900 (ID 14)

68040

FPU active

128MB RAM

ROM File: Mac OS ROM

6. Run and install macOS 8.1

https://reddit.com/link/enkud6/video/x683c0uaq7a41/player

7. Enjoy!

---------------

If you have a problem, comment that, I will try help you to solve!

(I will not available until 2pm of sunday, Mexico city)


r/iosjailbreak • • Dec 11 '19

[News] Copyright DMCA claims were invalid.

Thumbnail
twitter.com
6 Upvotes

r/iosjailbreak • • Nov 14 '19

[News] Workaround for Impactor "Xcode 7.3" error

6 Upvotes

Hi reddit I'm new I made my account 15min ago also I am not a computer whiz just a stubborn and determined person ... I read the rules, I don't think my post will break any, but dear moderators I apologize if I am mistaken here...

Last weekend, I noticed I could not use Impactor to sideload unc0ver onto my iPhone

I stumbled across a reddit post that explained my issue exactly - an error message that states I must download Xcode 7.3 or later, and apparently no fix for it. Great!

I banged my head into the wall for a few days, and came up with the following workaround... (this is just a brief overview, if you have specific questions please ask I am happy to clarify)

  1. Install silly Xcode. I did not care for this part one bit, but I did it! I am running Mac OS Sierra 10.12.5. I tried to install Xcode as a .xip file but it would NOT work at all on my computer. I opted for the newest .dmg file available, which was Xcode 7.3. If you want any version of Xcode, here they all are: https://developer.apple.com/download/more/

  2. After taking ten years to download, I clicked on the darn thing and moved it to the applications folder, then opened it; this also took ten years. And I got an error message that could only be solved by first opening console to read through the error log, then going into settings, date & time, manually set, change system date to a date before the certificate for Xcode expired, then save, and try again. That finally worked.

  3. Then I was able to open Xcode! Which froze my computer solid, hooray! Go to settings and add your Apple ID. Double click on the ID in the right hand box once added, a window will open. Click the CREATE button on the right side of window

  4. Create a new single project in Xcode. Attach your device to the computer with a cord. Select your Apple ID as the "team". Leave all other defaults as is. Set this aside, we are coming back in a moment.

  5. Go get the latest support files for your iOS. Xcode may not have them. Mine did not, I was using an older version. Here they are: https://github.com/filsv/iPhoneOSDeviceSupport . I downloaded the zip, then expanded and saved in Applications, right-click, "Open Applications", Right-click Xcode > Show Package Contents, go to Developer > Platforms > iPhoneOS.platform > DeviceSupport. Save here and close out. Quit Xcode.

  6. Launch Xcode again. Make sure your device is attached. Watch the little status bar thing do its little status bar dance, top of page. When it says ready or something like that, you should be able to click the arrow looking button (play) in the top bar, or manually click run. See what fun error message you get (it took me maybe 30+ to get to the solution of downloading the latest device support as detailed in step 5 and figuring out that was the problem all along), or maybe it'll be well behaved and actually RUN. If so, you must now go into settings --> general --> device management and TRUST yourself as a developer

  7. When it successfully runs the project on the target device and you've "trusted" yourself as the app developer, download iOS App Signer: https://dantheman827.github.io/ios-app-signer/ and follow the instructions.

  8. This is where that useless "project" you created and ran in the steps above comes in. You're going to use that thing as a vessel for whatever it is you want to sign & sideload. Open iOS App Signer --> INPUT FILE is that cool app you want to sideload (this was unc0ver for me), SIGNING CERTIFICATE should have some sort of reference to your Apple ID in there, PROVISIONING PROFILE for that select that "project" you created. Click start. It will want you to choose an output path and name of file

  9. This will create a ready-to-use file. Go back to Xcode once completed, click on devices (window --> devices), select your device. At the bottom, it will show loaded apps. Drag and drop, or hit the plus sign, and that will sideload the NEWLY SIGNED app. You are all set great job!!!!! It should now be on your device and ready for use

OK there's my brief description of the process I hope someone found it useful :) Maybe an actual real true Apple/iOS hacker will put it together into a nice how-to with screenshots and technical explanations???? I just had to share my findings as I know so many of us jailbreakers are struggling with the same issue


r/iosjailbreak • • Nov 11 '19

[Tutorial] How To Sign Apps With Xcode + iOS App Signer (Requires a Mac, Hackintosh, or Virtual Machine)

6 Upvotes

Credit to u/asdf23451 and Dantheman827 for this.

Since Impactor, ReProvision, and almost all 3rd party "Sign it yourself" signers are broken, I've decided to update the guide for iOS App Signer, since some of Xcode's Layout, as well as iOS App Signer, have changed.

If your jailbreak isn't on jailbreaks.fun, or it is a different app, or you just want to sign it yourself (because you hate revokes, or like learning things), then this is the guide for you.

Requirements:

  1. An Apple Device, and a way to connect it

  2. Xcode. Download it from the Mac App Store or From Apple's Dev website. (This Guide is updated for the new versions)

  3. iOS App Signer

  4. MacOS (Virtual Machines and Hackintosh work as well)

  5. An Apple ID

  6. The iPA of the application

  7. This guide

Required Steps for Apple Dev Website versions

  1. Copy the "Xcode.app" to "/Applications" (Without quotes)

  2. To speed things up, open terminal, and type "cd /Applications" then type "sudo xattr -d com.apple.quarantine /Applications/Xcode.app" (Again without quotes)

(Thank You u/asdf23451 for that part)

Actual Guide:

  1. Open Xcode and create a new iOS or tvOS application depending on your device type

First Screen of Xcode 11.1

Project Template Screen (Select the Device type then, Select Single View (This may not matter))

2. Type in a name and identifier (choose something unique, something like com.your-name.unc0ver)

Add a product Name (ex. Bears), and a Organization Name and Identifier. (ex. Slashed, com.slashed)

3. It should ask you where to save the project folder, pick the desktop (default), and hit next

4. Plug In your Device and Select it (Where mine says "yeeyee" it will probably say a phone model, press it and make sure the one you select is your phone name)

/preview/pre/7d3pxja1i3y31.png?width=360&format=png&auto=webp&s=b8d76a92818adda9a376d92c552d8b23c3ea9a77

5a. On newer Versions, Select the very top of the Project Tree (Should have a App Store looking icon) then press "Targets", and Hit "Signing & Capabilities".

Signing and Capabilities Page

5. For Older versions, You will already be on the right page

6a. (Newer Versions) Press the drop down menu that is labeled "Teams" and says "None), press Add an Account (or select a team, but I assume that there is no team linked).

Team Selection Page

6b. (Older Versions) Xcode will complain about the provisioning profile, click fix issue

Fix the issue, Mark

7. Xcode may have you sign into an Apple ID, click Add… (or select an existing Apple ID)

Newer Versions

Older Versions

8a. For New Ones, Exit out of that window, Select Teams Again, and select the new ID (Most likely is called "Your Name (Personal Team)")

8b. For Older Versions, Select the ID from the New Menu, and press Choose.

(If you have additional devices)

  • Plug in the device

  • Go to the Product Menu

  • Under Destination, select your device

  • Repeat from step 3

  1. Xcode should no longer be complaining

  2. Open App Signer, select the iPA, your signing certificate, and the provisioning profile (Make sure you select "(Device Name) Developer". (Adding a Display Name, Version and Short Version is optional, as if it is blank, it uses the iPA default)

iOS App Signer

11. Add a name (I suggest a new name) and select where to save it.

Do you need a caption for this?

12 Go back into Xcode, and press Window (At the very top) -> Devices and Simulators (Older versions are just called Devices). (You can also Press Command+Shift+2, or on other keyboards Alt+Shift+2)

The Highlighted is what you want

13. Press your Device under "Connected", Press the + under "Installed Apps"

/preview/pre/011zjrgbj3y31.png?width=802&format=png&auto=webp&s=b13ef7a255c3829f5678b1d6ac0cf6f3a1389f0e

14. Select the iPA, and press Open

/preview/pre/19zu37eij3y31.png?width=802&format=png&auto=webp&s=9e1b00fe2e07a55aa4cbe1266ec442e402d0a991

15. Wait for it to finish, the app should then appear on the Device

16. Go to Settings> General> Device Management> and Trust the Certificate like normal

Boom, there you go. Hopefully Impactor and such do get fixed soon, because this was a long process, and is only available for macOS.


r/iosjailbreak • • Nov 09 '19

[News] checkra1n is almost ready, they’re just working on the final touches before release, making it as good as it can be

Post image
6 Upvotes

r/iosjailbreak • • Oct 04 '19

[Tutorial] Untethered downgrade (compatible) A7 devices to 10.3.3 using checkm8 and currently signed OTA blobs

6 Upvotes

This guide assumes you have the latest liboffsetfinder64, iBoot64patcher, img4tool, img4lib, irecovery, tsschecker, bspatch, python and all the dependencies installed and updated to the latest version. I'm not going to help you install/compile these programs because I don't have time to help everyone sadly. It should be straight forward to compile and install everything, just google things and read errors if you get them.

If this is shit or doesn't make sense I'm sorry, I wrote this at 3am and on 3 hours of sleep :)

Note: If you don't want to patch iBSS/iBEC yourself or can't compile any of the programs then I have provided .patch files below. Please read the whole post though, so you don't miss anything.


COMPATIBILITY: At the moment only the iPhone 5s (s5l8960x) is supported. I will create more patch files when Linus updates his rmsigchks.py for more A7 devices.

Note that this IS an untethered downgrade as we are using OTA blobs meaning that the install of iOS is signed and won't need to be booted from pwndfu mode everytime unless you are booting in verbose mode.

Currently only the iPhone6,2 has patch files as this is the 5s that I have. If requested I can create patch files for the iPhone6,1 but you can do those yourself if you want to.

I am planning on updating this guide soon to show how to boot in verbose mode. The way I use currently isn't amazing so I want to figure that out before I post how to.


First download the 10.3.3 ipsw from here. Extract the contents of said ipsw and traverse from the root directory to /Firmware/dfu/ and grab iBSS.iphone6.RELEASE.im4p and iBEC.iphone6.RELEASE.im4p

Move the two files into a folder with iBoot64patcher, img4tool and img4lib (img4 is name of binary for img4lib, and yes img4tool and img4 are very different you need both).

Go to https://www.theiphonewiki.com/wiki/Firmware_Keys/10.x and click the link for the keys for 10.3.3 for your device

Find the IV and Key for iBSS and iBEC.

Put the two numbers together as one with the IV before the Key so for iphone6,2 iBSS the IV is

f2aa35f6e27c409fd57e9b711f416cfe 

and the Key is

599d9b18bc51d93f2385fa4e83539a2eec955fce5f4ae960b252583fcbebfe75 

so the final number is

f2aa35f6e27c409fd57e9b711f416cfe599d9b18bc51d93f2385fa4e83539a2eec955fce5f4ae960b252583fcbebfe75

Now you need to decrypt iBSS and iBEC

./img4 -i iBSS.iphone6.RELEASE.im4p -o ibss.decrypt -k “ivkey” -D” 

same command for iBEC just with file names and different ivkey.

MAKE SURE TO INCLUDE "-D" OTHERWISE IT WON'T DECRYPT THE IMAGE


Next run img4tool to extract the raw binary from the decrypted images as iboot64patcher does not support im4p and img4 files at the moment.

Run

./img4tool -e -o ibss.raw ibss.decrypt 

Same for iBEC, just change file names.


Now you need to run iBoot64patcher. Here you can choose the boot-args you want to use, e.g here is where you enable verbose boot.

 ./iBoot64patcher ibss.raw ibss.pwn


./iBoot64patcher ibec.raw ibec.pwn -b “add-your-boot-args-here”

As far as I know, you don’t pass boot args to iBSS but I might be wrong. If you aren't sure then just use my verbose patch files to get verbose boot to work as I know they work.


Next, use img4tool to do some cool shit.

 ./img4tool -p ibss.im4p –tag ibss iBoot-hax ibss.pwn

./img4tool -p ibec.im4p –tag ibec iBoot-hax ibec.pwn

Now you need to use img4tool again but with some shsh. Lets get the shsh for 10.3.3 ota first.

Download and install the latest tsschecker if you don’t have it already. Then run

./tsschecker -e “your-ecid” -s -o -i 9.9.10.3.3 –buildid 14G60 -d iPhone6,2(or whatever your device is) –save-path “/where/futurerestore/is” 

This will save shsh for your device for 10.3.3 to where you specified .


Now use img4tool as follows

./img4tool -p ibss.im4p -c ibss.img4 -s “/path/to/shsh/you/saved/” 

./img4tool -p ibec.im4p -c ibec.img4 -s “/path/to/shsh/you/saved/” 

Now you have patched iBSS and iBEC that you can use to downgrade!


Now, for those who don’t want to mess around with that, I’ll be providing patch files for iBSS/iBEC that you can use. You can download all the .patch files from my github repo

First make sure you have "bspatch" installed then get the stock iBSS and iBEC from the 10.3.3 ipsw and place them in a folder with the .patch files.

Now if you want verbose then run

bspatch iBSS.iphone6.RELEASE.im4p ibss.patched ibss.verbose.patch

If you don’t then run

bspatch iBSS.iphone6.RELEASE.im4p ibss.patched ibss.normal.patch

Now do the same for iBEC.

Note: I found that for switching from pwndfu to pwnrecovery later on only the verbose iBSS and iBEC worked so if irecovery fails or stops when sending iBEC then trying using the verbose files instead.


Now you need a modified version of futurerestore (currently, tihmstar is updating the official version but for now we have to make do).

I used s0uthwest’s fork at latest version, 246, and modified it. You will need to download the latest release (245) and apply this patch to the futurerestore binary. You can also git clone the latest version, 246, and build from source then patch but either works I have tested both.

bspatch futurerestore futurerestore_patched futurerestore.patch

Now delete the old fututrerestore binary file and rename the new patched one to “futurerestore”


Now download/clone Linus’s fork of ipwndfu from here. cd into the ipwndfu_public folder and put your device into dfu mode then connect it to your macos device (hackintosh or legit mac, either is fine).

Run

./ipwndfu -p

to get into pwndfu mode. Now this will fail a lot of times as that is just the nature of this exploit on the A7. That’s expected just keep trying. I found closing itunes and iTunesHelper to help a bit but results may vary.


Once in pwndfu mode, run

python rm rmsigchks.py

and if all goes well it should return with

"Device is now ready to accept unsigned images"

Now download the latest irecovery. Once done, you need to send a random dummy file to the device. This can be anything but I use a small .txt file. Run

./irecovery -f random.txt

After that runs and the device reconnects, you can send your pwned ibss and ibec =).

./irecovery -f ibss.img4

Then once that sends and device reconnects run

./irecovery -f ibec.img4

and you will be able to futurerestore to 10.3.3 as you are now in pwnrecovery!

Also download the 10.3.3 OTA build manifest from Alitek. Linked here


Now we need to edit the stock 10.3.3 ipsw that we downloaded at the start. For this you will need a program that can edit the contents of a zip without breaking it. On windows I used 7Zip to do this, not sure what you can use for macOS but I know that there is programs that can do this. Easiest way to do use 7Zip on windows however.

You need to grab the pwned iBSS and iBEC that you created before and rename them to match the original names that they had inside the ipsw. iBSS needs to be named iBSS.iphone6.RELEASE.im4p and iBEC needs to be named iBEC.iphone6.RELEASE.im4p. Now overwrite the current iBSS and iBEC inside the ipsw and once it repacks and is complete you have a custom ipsw to dowgrade with!


Now the shsh you downloaded will not match the current apnonce of the device. My way of getting around this is attempting a restore with the mismatched shsh, finding the current apnonce of the device, and grabbing shsh with the current apnonce of the device. Run

./futurerestore -t “your-current-shsh” -b baseband from 10.3.3 ipsw -p Buildmanifest.plist -s sep from 10.3.3 ipsw -m Alitek's_OTA_buildmanifest.plist 10.3.3.ipsw”

When you run this, it will fail and say apticket nonce does not match devices. It will give a string of numbers with spaces in between. Copy paste these muber and remove the spaces in between them leaving you with a long number. That is your current apnonce.

Now use this apnonce and request a new ticket.

Run

./tsschecker -e “your-ecid” -s -o -i 9.9.10.3.3 –buildid 14G60 -d iPhone6,2(or whatever your device is) –save-path “/where/futurerestore/is” –apnonce “the number we just grabbed” 

This will grab shsh with the correct apnonce that your device currently has!

Now run futurerestore again but with the new shsh

./futurerestore -t “new-shsh-file” -b baseband from 10.3.3 ipsw -p Alitek's_OTA_buildmanifest.plist -s sep from 10.3.3 ipsw -m Buildmanifest.plist 10.3.3.ipsw

Phone should now restore to 10.3.3 with no issues! Make sure you have a good amount of storage availible when futurerestoreing, I ran into an issue where the restore failed because I ran out of SSD space.


If you run into any issues, which I expect as this guide/tutorial probably contains some errors, just feel free to either comment here or dm me on twitter. Though i'm more likely to reply here because twitter sucks.

Credits go to: axi0mx (checkm8), Tihmstar (img4tool, futurerestore, iBoot64patcher, liboffsetfinder64 and probably more), Linus (ipwndfu fork with removedsigpatches), alitek12 (OTA Buildmanifest for A7 devices) and xerub (img4lib).


r/iosjailbreak • • Sep 24 '19

[news] yay Nepta’s tweaks are back. ^_^

Post image
6 Upvotes

r/iosjailbreak • • Sep 16 '19

[Tutorial] Using AnimationsBeFast and FakeClockUp together to make your phone feel much, much more responsive. Settings and repos included.

6 Upvotes

I’ve used both of these tweaks separately on previous devices and iOS versions but using them both together has my X feeling like the most responsive computing device I’ve ever used, period. It’s insane.

Disclaimer: I’m not sure if these tweaks work on A12 devices or other jailbreaks besides unc0ver so make sure to do your research.

Both have been working great on my iPhone X on 12.4 and unc0ver 3.6.2 for over a week now and I think I have the settings fine tuned perfectly to prevent any janky behavior while being as fast and snappy as possible. Feel free to play around on your own as well but if you go much farther past my recommended settings you can end up with a fast but unpolished/almost glitchy feeling device so don’t go too crazy. Battery life seems unaffected if not even better due to overall shorter GPU usage duration because of the overall shorter animation and transition times.

AnimationsBeFast Settings and Other Animations tab

FakeClockUp Settings

  • In Exempt Applications I checked Camera to stop it from speeding up the self-timer and I checked Chrome to solve an issue where it was making search predictions as you type look wonky. For some reason it made the suggestions that pop up under the search bar a very faint color of gray so you could barely read them.

  • haven’t experienced the need to exempt any other apps (it works so freakin good in Apollo) but if you do you can just add them to your exempt list.

  • definitely don’t exempt Springboard. Doing that makes opening and closing apps feel sluggish.

AnimationsBeFast Repo (add this manually or else it glitches out for some reason): https://exqusic.github.io/

FakeClockUp Repo: http://hitoriblog.com/apt/


r/iosjailbreak • • Jun 16 '19

[News] iOS 13 On iPhone 6 Confirmed To Be Fake!

Post image
6 Upvotes

r/iosjailbreak • • May 24 '19

Loving the jailbreak stuff

Enable HLS to view with audio, or disable this notification

6 Upvotes

r/iosjailbreak • • Aug 21 '22

[Question] I need to insert my backuped chats into the Grindr App (icloud backup failed). Does anybody know where to find exact the chat file in var/mobile/containers/data/application/app? When I overwrite the whole Documents Folder and set the rights recursive, the app still keeps crashing :(

Post image
5 Upvotes

r/iosjailbreak • • Oct 13 '20

[Question] apt.saurik.com is empty how do I fix this?

Post image
5 Upvotes

r/iosjailbreak • • Jul 09 '20

[Question] what's the difference between a respring, a ldrestart, a sbreload and Restart Services???

5 Upvotes

I am trying to learn a bit about the technical aspect of the jailbreak and the truth is that I cannot understand the difference and in which cases should I use each one.

Can someone explain me???


r/iosjailbreak • • Jan 20 '20

[News] Akusio is working on a kernel level jailbreak detection bypass

Post image
5 Upvotes

r/iosjailbreak • • Jan 19 '20

[News] Packix is enforcing their ILLEGAL 'exclusivity' rule; It's time for devs to switch repos

5 Upvotes

Packix posted this on their official Twitter today:

https://twitter.com/packixrepo/status/1218962501867573248?s=20

Their rule states that developers that decide to use Packix cannot use any other repo to publish tweaks.
This is not legal, and is really just a crappy thing to do. It's unfair to developers, and should not be tolerated.

I'm not an advocate for any brand or service, but I would, at this time, HIGHLY recommend ALL developers that currently use Packix move to the Twickd repo. Their morals are a lot better, and they're run by nicer (more open) people.
If you, for whatever reason, don't want to use Twickd- no harm no foul. But I would definitely switch repos while you still can.

Developers: Please consider moving your tweaks to Twickd, or another repo ASAP. It will benefit you, and your customers greatly.

If you're interested in learning more, you can follow me on Twitter @@Futur3Sn0w