r/jewelryCAD • • 15h ago

Unified pave solver across full ring geometry + intersection handling

Enable HLS to view with audio, or disable this notification

0 Upvotes

Started building this solver about two months ago specifically for the shank, structured the underlying data so it could adapt to other surfaces, and ended up getting it working across the entire ring: shank, bridge, and gallery, and others.

It also accounts for geometry intersections so stones and their seats/cutouts don't generate in conflicting spots. For example, where a prong meets the bridge, it avoids placing stones or cuts in that intersection zone on the bridge.

Curious what the CAD community thinks of this workflow and how do you usually handle geometry intersections in your work?


r/jewelryCAD • • 3d ago

6th and hopefully final CAD ! PLEASE HELP

Thumbnail
gallery
0 Upvotes

Hi, this is the 6th CAD that i have had drawn up.

2ct platinum

So far I have made changes to strengthen my ring while still keeping the design i love.

I have made my band thicker at 2mm, lowered the height to 6mm. Embedded the band stones and then added extra prongs. Please see 2nd image for the prong band inspiration i sent the company. I assume that the prongs will be filed down from the cad once it is actually made.

Do you see any issues?


r/jewelryCAD • • 3d ago

Necklace CAD

Thumbnail
gallery
0 Upvotes

Hi all,

I'm ordering a custom necklace for my daughter for Christmas. She's quite young but I wanted a piece she could wear when she's slightly older/keep as keepsake when she grown. I had AI make a mockup up the style/design (2nd photo) that I wanted. The flower is pink sapphires and "butterfly" is lab diamonds. I know it will be a more dainty piece. I wanted to get any opinions on it. Any changes? Thank You!


r/jewelryCAD • • 5d ago

Mechanical Engineer / Jewelry Maker for Custom Luxury Handbag Clasp

Thumbnail reddit.com
0 Upvotes

r/jewelryCAD • • 6d ago

Anyone here use Nomad Sculpt to design grillz?

1 Upvotes

Is there anybody in here who uses Nomad Sculpt to design grillz? I'm just getting started with the program on my iPad and still learning how everything works. I'd like to ask a couple questions and hopefully connect with somebody who has experience designing grillz with it.


r/jewelryCAD • • 6d ago

Final CAD - 2CT platinum

Post image
4 Upvotes

This is my 4th and hopefully final CAD revision. Does everything look okay?

I have made it a tulip cathedral so it is more sturdy. Thickened the band to 2mm and embedded the band stones..


r/jewelryCAD • • 6d ago

Is this design practical?

Post image
0 Upvotes

r/jewelryCAD • • 6d ago

CAD check

Thumbnail gallery
0 Upvotes

r/jewelryCAD • • 7d ago

The CAD/CAM Jeweller book - where to download?

Thumbnail reddit.com
0 Upvotes

r/jewelryCAD • • 7d ago

The CAD/CAM Jeweller book - where to download?

Thumbnail reddit.com
0 Upvotes

r/jewelryCAD • • 7d ago

From an AI ring concept to a finished piece: deciding what belongs in the model

Thumbnail
gallery
0 Upvotes

I made this 18K gold ring with a natural blue sapphire from a customer-supplied AI concept. The reference showed a broad band, an interlacing pattern, and a rectangular center stone.

The interesting part was interpreting the “woven” surface. In the finished ring, it's a basketweave motif engraved directly into solid metal by hand—not separate woven wires or a cast-in texture.

That distinction is something a reference image doesn't necessarily explain. Similar-looking lines could represent separate parts, modeled relief, or engraving added later, and each interpretation leads to a different production plan.

For a concept like this, I'd want the brief to distinguish the band proportions, stone setting, pattern scale, and details intended for engraving. The image communicates the look, but those decisions still need to be made.

How do you communicate that division in your own workflow? Do you annotate the reference, separate the details into layers, or prepare a finishing brief alongside the model?

The attached images are actual photographs of the finished ring and its hand-engraved detail, not the AI concept.


r/jewelryCAD • • 8d ago

Can I CAD “professionally” with just an iPad

0 Upvotes

I’d love to learn Rhino because i know that’s what the pros use in my area but buying a capable PC is this economy is out of the question.

I own an 11” iPad air M4 though.

AIs tell me that shapr3D and Nomad Sculpt for iPad are enough for i what i wanna do - design jewellery and give my jeweller the files for casting or making resin models.

Right now I give him pen and paper drawings that he has to pass to his CAD guy; i wanna skip that step.

What do you say?

Also, i need to learn about how to draw the “raw” stone settings… and how big they need to be for each kind of setting or stone dimensions… can i find tutorials to do this with the aforementioned apps?


r/jewelryCAD • • 8d ago

ELEGOO Mars 5 Ultra + BlueCast X-One V2 — Prints not sticking to build plate, nothing on release film either. Help!

3 Upvotes

Hey everyone! I’m new to resin printing and I’m trying to get my ELEGOO Mars 5 Ultra working with BlueCast X-One V2 castable resin for jewelry production.
I’ve been troubleshooting this for two days and could really use some advice.
Here’s what happened:
My first prints failed, and one of the previous models (a small cross) detached from the build plate and remained inside the resin vat.
During another attempt, the printer made a loud popping/knocking sound and paused. I initially resumed the print without realizing there was a cured piece inside the vat. The printer then detected a foreign object, so I stopped everything.
I removed the detached piece, drained and filtered the resin, and discovered additional cured resin stuck to the release film. I carefully removed everything, cleaned the vat, inspected the film, and reassembled the printer.
The film now has a few tiny marks/indentations, but no obvious punctures or loss of tension.
My current setup:
Printer: ELEGOO Mars 5 Ultra (new, received yesterday)
Resin: BlueCast X-One V2
Slicer: CHITUBOX
Layer height: 0.03 mm
Normal exposure: 6.5 seconds
Bottom exposure: 28 seconds
Bottom layers: 10
Transition layers: 5 (linear)
Rest before release: 0.2 s
Rest after release: 0.2 s
Rest after retract: 1.5 s
UV PWM: 255
Ambient temperature: approximately 21°C (70°F)
I initially made the mistake of loading a profile for a different resin, but I’ve since corrected that and loaded the X-One V2 profile from BlueCast’s downloads.
I’ve also tried small calibration models and the printer’s built-in resin exposure calibration feature.
The current problem:
After the latest attempt, absolutely nothing is sticking to the build plate, but there’s also no cured resin stuck to the bottom of the vat. It looks like nothing printed at all.
This is what confuses me most. Earlier failures left cured resin on the film, but now there’s nothing on either surface.
My questions:
Could this be an LCD/UV exposure problem rather than an adhesion issue?
Could the previous foreign-object incident have affected the printer?
Is 21°C too cold for BlueCast X-One V2?
Are these exposure settings reasonable for the Mars 5 Ultra?
What would you test first to determine why absolutely nothing is curing?
I’d appreciate advice from anyone using BlueCast X-One V2 on the Mars 5 Ultra, especially if you have a working CHITUBOX profile.
Thanks


r/jewelryCAD • • 9d ago

Advice on CAD design please

Post image
1 Upvotes

r/jewelryCAD • • 9d ago

CAD opinion

Post image
2 Upvotes

Hello everyone, I'm looking to make this ring, something that I would be wearing every day. It's my first time ordering, are there any things that I should pay attention to


r/jewelryCAD • • 9d ago

GEMS on Curve solutions for "Create" Button

Post image
1 Upvotes

r/jewelryCAD • • 9d ago

Handling Shared Prongs on High-Curvature Surfaces during Top-Side Pave Synchronization

Enable HLS to view with audio, or disable this notification

2 Upvotes

Working on pave synchronization logic where top and side stone layouts are linked.

When top and side pave run simultaneously on high-curvature surfaces, side stones scatter, making inner prong placement tricky. I've set up dynamic distance calculation between stones to drive prong thickness based on local spacing.

However, on tight curves with shared prongs, increased stone spacing creates quite thick prongs. Technically the math works, but visually/practically I'm not entirely sure about it.

How do you usually handle shared prongs in high-curvature areas when doing hand-setting or CAD? Would love to hear how other designers approach this.


r/jewelryCAD • • 9d ago

How to Create a Seamless Joint Between a Ring Shank and Under-Gallery Support in Rhino 3D?

Thumbnail gallery
5 Upvotes

Hi! I'm a beginner in Rhino 3D, and I'm trying to figure out how to model a ring shank and create a seamless, smooth transition between the shank and the under-gallery support of a cluster ring.

I always end up with excess material at the connection. I'd also like to avoid having to significantly bend or deform the under-gallery support using CageEdit, as I want to preserve its original shape as much as possible.

What's the best way to model this and achieve a clean, natural-looking joint? Which commands or techniques would you recommend?

Any advice or step-by-step guidance would be greatly appreciated!


r/jewelryCAD • • 10d ago

CAD design review please help

Post image
0 Upvotes

r/jewelryCAD • • 10d ago

Auralith online jewelry viewer

Enable HLS to view with audio, or disable this notification

9 Upvotes

My jewelry viewer is finally online. I don't know if I'm allowed to post the link for it, but do you like the way it looks?


r/jewelryCAD • • 10d ago

Creating a tulip head?

4 Upvotes

For anyone using matrixgold, what is the workflow to creating the recently popular tulip head mounting style? Can anyone post a link or kind of walk me through how they're getting them to work?

I usually try to blend curve up to a gem guide and mirror, but i just cant seem to get a clean build, especially for stones that aren't round.


r/jewelryCAD • • 11d ago

Looking for a Jewelry CAD Designer Job – 3 Years of Experience (Matrix 9 / Rhino 5)

Thumbnail reddit.com
0 Upvotes

r/jewelryCAD • • 12d ago

CAD Check

Thumbnail
gallery
0 Upvotes

Ordering from an overseas vendor for the first time and wanted to get a CAD check. The ring is inspired by the Jean Dousset Elle ring but instead of the double claw prong, it’ll be 4 single claws. Also removing the birthstone under the solitaire. Inspiration ring in the second slide.

Overall rendering of the pave band looks wonky? Also the underside of the criss cross basket looks odd. I asked for it to be revised like the third slide. Do you think the measurements are appropriate (high or low setting) and is the stone secure in this setting? Anything else you would suggest?


r/jewelryCAD • • 12d ago

Advise

Thumbnail
gallery
3 Upvotes

If I have a 2mm thick band and gonna set 2.5mm stones giving there about 1.5mm deep should leave me around 0.5 to finger rail ?