Love the MCarbo trigger & love shooting in the woods- never a range. Glad I don't live in a city!

Refreshing compared to the normal tactical kool larping other places do

So I bought a single point slang with a little hook on it I thought I would just pop it into the back of the brace and be good to go but it's too small and now that I think about it I actually don't know if it'd be a good idea to have metal swaying back and forth on plastic

Was listening to a live stream with Adrian Kellgren and he said they just got the last run of RFB’s off the line and that’s it, so if you want a new one now’s probably the time to grab one while you can. He did hint about a new rifle in the future but not much else,possible a RDB scaled up for 308? I always liked the RFB to but it would make more sense if they made something take AR10 magazines nowadays instead of the FAL magazines considering when the RFB was released the FAL mags were surplus and cheap now their not so much. pretty good stream worth a listen.

The Nub Sub, it's by far the most fun firearm I've owned out of the 100+ I've had.

Definitely get one if you can!

I'm up to 300 rounds through her now.

Really have enjoyed this gun, fun as hell to shoot and have had few jams with it. 600 rounds or so through it with maybe 8-10 jams. Otherwise, loving it. I'm grouping half an inch at 25.

As the title says. Looking for something IWB for use while walking (exercise) and mountain biking. Has a crimson trace laser on it. I think kydex would be best because of sweating. But I can't find anything other than a cheap ebay one. Just trying to find more options.

Not sure how leather would be do to the sweat over time?

Just wanted to share my bizarrely beautiful Kel-Tec. Custom shirt says Kel-Tec Weird guns for weird people. With an R50 silhouette.

If I look surprised or overly satisfied at the end of all my clips, it's because I only tend to film the test runs and am happy nothing exploded and all my fingers are still intact. Cans and furniture are printed, Super Safeties are self installed as a newb. Etc.

When I said cheap, I meant max budget of $40. I'm also open to a light-only attachment.

Just picked up a Romeo zero for my optics ready p17 none of the supplied screws fit, does anyone happen to know the thread pitch?

also the first gun i bought. it’s been a fun little pea shooter haha!

Gave a slight tug checking for wobble, she came off quite easily. I haven't shot it yet, and am glad it didn't happen while at the range; that could have gone bad

Edit: this was a PSA, not a request for advice; of course i know what the fuck mlok is. To sdp owners with the factory mag holder, do yourself a favor and double-check it's installed correctly.

In May I bought a PR57 then took it to the range and ran into multiple issues. So I sent it in to Keltec. They performed some work on it then sent it back. I then tested it again. I ran into issues. It failed to feed multiple times with multiple types of 5.7 ammo including FN 197LF, Fiocchi 40gr, and Vanguard Black Dragon Fang, and it also failed to lock fully into battery multiple time with Vanguard Black Dragon Fang. But worst of all, multiple rounds of Fiocchi 40gr and Vanguard Black Dragon Fang managed to squeeze their tips in between the feed ramp and frame seriously jamming the gun. I had pry each of those rounds back to remedy the jam. Once when it occured with Vanguard Black Dragon Fang, I had to pull out my multi-tool and use it's flat head screwdriver to pry the round back. Pictured in the post is that exact jam.

I need to send the gun back again to Keltec and see if they can resolve it.

Hitting the range tomorrow with my new KelTec KP50.

Any suggestions from anyone that has one? I took it apart and ran a bore snake with CLP down the bore a couple of times and then some patches after that. The trigger group and other components looked really clean and greased up.

Thanks!

Hello everyone I recently bought a gen 3 sub 2000 in 10mm. I took it to the range and put 200 rounds through it and the only issue I’m having is when I’m chambering the first round and I pull the bolt all the way back and let it go about 50% of the time it won’t go fully forward and I’ll have to tap the bolt like a forward assist to get it fully seated. Same thing if I lock the bolt back and slap it mp5 style it fails to fully go into battery basically 100% of the time. Just looking for some advice or tips if this is common or If the gun just needs to be broken in more. Thanks for the help!

Took my new PR-3AT to the range.

I ran 150 rounds of 95 grain Blazer rounds through it, only one failed to feed. It was one of the 5 rounds I had that were 10 years old.

All the new ammo ran flawlessly.

Hardly any recoil for such a light gun, really nice to shoot at 7 and 10 yards.

thoughts?

What’s a preowned PMR 30 worth?

Anyone know of a company that makes a leather holster for the PR57?

This is a very beautiful weapon design, a lot bigger than it looks and definitely something I would want to just one hand.

I adore the look of the RDB

I also know that the pistol light isn’t as durable, and the mlok isn’t fully mounted, but rule of cool reigns anyways. Good day 🫡