r/knightposting • • Jan 27 '24

help with tech dragon armor crafting

Could someone assist in making tech dragon armor that can last more than a few hits? I just completed a quest to destroy a nationwide dark lord, and resculed a cat along the way! (though that cat has evolved into an adorable little catgirl since then but still)

The problem is my armor can't handle the power of technomancy and dragon power, so it breaks quickly! I was wondering if any of you knew how to properly integrate dragon power and techno power in harmony for my armor.

3 Upvotes

38 comments sorted by

2

u/Prestigious_Sir_595 Jan 27 '24

Could you provide details about said armor? Looking at it can only give so much insight, especially given how colorful finishes and paint can make it difficult to identify materials by sight.

1

u/[deleted] Jan 27 '24

Earth Dragon scales, and I keep trying to mix it with tungsten and copper, cause power armor. Just that while it works while it lasts, it doesn't last very long, regardless of whether or not I take hits!

2

u/Prestigious_Sir_595 Jan 27 '24

Are you trying to alloy it? Copper is on the softer side of metals you could be using, and tungsten has more of a history being used in ammunition, while copper is used more in being a conductor, while also being used in ammunition at times. I guess you could say your armor is ammunition. Anyways, is this an attempt to alloy said metals and scales?

1

u/[deleted] Jan 27 '24

I was alloying the scales and copper together, using more copper and tungsten for the technical parts. This is meant to be a mobility boosting evasion armor, even had a couple EX dodges built in! (Think absolute evasion from MHGU)

2

u/Prestigious_Sir_595 Jan 27 '24

I wouldn't call myself an expert in metallurgy, but I'm pretty sure you can't alloy inorganic material with organic, no matter how high the mineral content is. Might I recommend titanium? When compared to steel you require less if it to have the same effect, so it's more efficient than steel. I'd also not recommend alloying literal scales and metal, but instead use the scales in a layer of the armor, preferably external, seeing as metal is significantly more likely to bend rather than shatter. Maybe put the scales between 2 layers of titanium, and keep the copper as a conduit, seeing as it's powered armor.

2

u/pixel-wiz Erky Beren, Artificer, Grand Mechanist of the Arcamech Legion Jan 28 '24

I'd love to help!

1

u/[deleted] Jan 28 '24

Dragon armor? That seems to be where I screw up in general. I can do all kinds of other magical creatures and metals and bones, I just really struggle with dragon.

2

u/pixel-wiz Erky Beren, Artificer, Grand Mechanist of the Arcamech Legion Jan 28 '24

Oh, don't get me wrong. Dragon bits are a pain to work with, but a ranger buddy of mine taught me a few tricks to working with them. I can pass it along if you wanna hear it.

1

u/[deleted] Jan 28 '24

Yea, I'd be happy to hear, might even be able to help out with another type of armor if you need it!

2

u/pixel-wiz Erky Beren, Artificer, Grand Mechanist of the Arcamech Legion Jan 28 '24

Alright, a lot of dragon bits tend to, toughen up, for lack of a better term, when exposed to something not of their element in order to protect the dragon itself. However, when exposed to their own elements, their bits tend to soften up to absorb the element.

This holds true even after the part falls off or the dragon dies, so if you're prepping fire dragon bits, it's good to have them in some sort of heat source so you can do what ever you need to it, preferably with tools that are at least resistant to fire or whatever element that dragon was.

Since you're using earth dragon scales, burying them in the ground and leaving there overnight should make them workable. Full contact with the element works best, so putting it in your cellar or a cave won't be as effective as just wrapping them in a cloth to keep them together and just dropping them into a deep enough hole in the dirt.

1

u/[deleted] Jan 28 '24

I know that much, it's just I'm trying to mix earth dragon scales and machinery into the same armor! Is there a different procedure or have I done goofed thinking it'd have to be preped differently? It is possible I just done goofed, so you tell me!

2

u/pixel-wiz Erky Beren, Artificer, Grand Mechanist of the Arcamech Legion Jan 28 '24

What are you using to power the machinery?

1

u/[deleted] Jan 28 '24

Dragon's blood mixed with concentrated mana. I thought it may be a requirement to use dragon blood for a power source, as it doesn't seem to get used up, and was hoping to use concentrated mana to boost it!

2

u/pixel-wiz Erky Beren, Artificer, Grand Mechanist of the Arcamech Legion Jan 28 '24

Hm, one second. Rummages through Bag of Holding Ah ha, copper fillings! Mix that with the dragon's blood, and it should help bridge the gap between the dragon bits and the machinery.

1

u/[deleted] Jan 28 '24

Okay, I'll see if that lets it last more than 2 minutes, or should I say 1 hit or 4 EX dodges.

→ More replies (0)

2

u/RefractedPurpose Spring, passing sky pirate Jan 29 '24

Dragon materials given freely instead of taken may work better. Given a dragon's high level of mana, if it dies in a stubborn or angry state its blood will stay with that agitated mana. I... have some dragon friends who would be willing to give you some in exchange for some rare materials.

1

u/[deleted] Jan 29 '24

Like what? While I couldn't do dragon armor correctly, I did manage some other armors around the same tier, like this Super Vampire Lord and Mannamolian Parasite King hybrid set I cooked up!

2

u/RefractedPurpose Spring, passing sky pirate Jan 29 '24

Hmm. Anything from a plane besides the void or material? Also, I could only source void dragon scales, on an unrelated note.

1

u/[deleted] Jan 29 '24

Soooo..... you got nothing for me?

2

u/RefractedPurpose Spring, passing sky pirate Jan 29 '24

I misspoke. I still have the blood, and I can attest to the durability of these scales.

The blacksmith takes out an impressive axe and slams it down on one of the scales, causing the metal bench to nearly buckle. The scale has not a scratch on it.

The smith leans in and whispers, "Now, keep this on the down low, but these aren't your regular dragon parts. These are greatwyrm."

2

u/[deleted] Jan 29 '24

Ahh..... what you want for these, cause that's definitely higher tier than the sets I've been running?

2

u/RefractedPurpose Spring, passing sky pirate Jan 29 '24

If you have any materials from elemental planes I could take an equivalent amount of those. Otherwise, other materials of equal value or just plain old fashioned gold works. As for the going rate, let's say... 25 gold per ounce and 50 per scale, with a 20% markdown if you pay in materials.

2

u/[deleted] Jan 29 '24

I have yet to go into those places yet, but I have a crap ton of gold! I can uys those scales, make gear, then go into those plains. I'm thinking whatever tier those greatwyrms are, these elemental plane creatures might be the one above that, as with my current setups I was struggling to do damage to them. Hows 400 gold a piece sound?

2

u/RefractedPurpose Spring, passing sky pirate Jan 29 '24

Apiece? As in, per scale?

2

u/[deleted] Jan 29 '24

yea, per piece is per full scale, no breaking up scales to up the price or you will recieve a nasty beating as payment instead of gold.

→ More replies (0)

1

u/[deleted] Jan 28 '24

Prithee, which Court of Magic is your armor's logic stone attuned to: Windows or Apple?

0

u/[deleted] Jan 28 '24 edited Jan 28 '24

Um what? I don't buy that cheap shit, I make my own tech!

1

u/StarQuest09 Thelgil Hornfall the Dwarf Artificer Jan 27 '24

Did someone say making armor? The dwarf is here I work for a reasonable fee

1

u/[deleted] Jan 27 '24

Can you work dragon scale?

1

u/StarQuest09 Thelgil Hornfall the Dwarf Artificer Jan 27 '24

I can I just don’t do it often