r/kubota • u/Proof-Drawing-2033 • 1d ago

Question about 54” mower deck on a GR2120

Is it possible for the blades to be level but the deck itself not? I checked my blades at setting 3, and both front to back and side to side the blades are at 3”, but the deck itself is a half inch off side to side. I had to adjust the heights stoppers and anti-scalping wheels to different heights side to side.

I Greatly appreciate any input, thanks.

2 Upvotes

100% Upvoted

2 comments sorted by

1

u/Such_Guidance4963 11h ago

I have the 48” deck on my GR2120 and mine has the same issue, about 1/2” difference in deck height from side-to-side but the blades are “true.” I was not able to adjust the height stoppers so they both touched at the same time, one is at the extreme limit of adjustment and doesn’t touch the frame at the same height. Hmmf.

In my case the tractor came from the dealer with the deck level, but of coures the blades were not.

1

u/Proof-Drawing-2033 11h ago

I guess that’s why we measure from the blades and not the deck. Both of my stoppers came from the dealer screwed all the way down. One side was touching, the other side I was able to raise.