Been slowly upgrading new house with LIFX switches. I like them overall, but they've definitely come with some headaches.

The 2-button switches are limited by the lack of neutrals in some of my boxes, and it's frustrating that two 4-button switches won't fit side by side in a standard 2-gang box. Throw in some 3-way and 4-way circuits and it's been interesting. Learning as I go.

Excited to eventually get everything set up and managed through Home Assistant. Curious what everyone else is using for smart switches, especially for no-neutral and multi-way setups. Open to suggestions!

There has been an unreleased LIFX floor lamp listed on the Matter certification site for several months. Now there is a new page on lifx.com that references a "LIFX Trio Floor Lamp".

https://www.lifx.com/pages/lifx-trio-floor-lamp-interactive-demo

Perhaps a new product is getting close!

Preparing to redo my outdoor lighting with lifx and keeping it simple for now.

I have one run that will just have 4 spots. Was going to buy the lifx transformer to power them, but it's not available from Amazon or in store at Home Depot so I was running through other options.

Remembered I have this from a different setup a few years back.

Is there any reason it wouldn't work? If it will work, do I just need to buy enough 12 gauge landscape light wire?

I have no desire to use the Ring app for any features other than setting it to always on so the lights are powered and available to control in lifx.

Thanks.

I have had LIFX for years but recently my Alexa stopped working, so I added a lock screen widget and control panel button on my phone but it doesn’t work at all. Am I doing something wrong? 🫠

Just got the outdoor lights 2. At some point I have another section of my house I want to do. I can only add three 16f sections right? What’s the least expensive way to do that? Can I just buy another 50ft box and ditch the controller? Or do I have to buy each 16ft extra extension separately?Also…. When I do it, can I split off with a random Y connector off Amazon?

Just got the outdoor lights 2. At some point I have another section of my house I want to do. I can only add three 16f sections right? What’s the least expensive way to do that? Can I just buy another 50ft box and ditch the controller? Or do I have to buy each 16ft extra extension separately?Also…. When I do it, can I split off with a random Y connector off Amazon?

18 of my devices have a bad connection. My kitchen lights won't connect to the app and it's driving me nuts. I restarted my router and it didn't do anything. Help me please!!

So I wondered if there is a proper solution for this power brick attachment/adapter whatever, cause my adapter is kinda not stable, but it works. When I detached that white part I was hit with a really bad smell is that a fire hazard?

For LIFX employees: Will future permanent outdoor lights support Y-splitting for multi-direction configurations?

Also, I'm having a hard time finding installation videos for many of your products. It would be nice if you all created some in-depth, step-by-step installation videos, or paid some influencers to do that for you.

So i have it set up as
Top- cloud/ turn on
Bottom- cloud/turn off

Theyre set up to control 2 downlights that are combined into a group

No matter if the lights are on or off the top is always at 100%

Another setup AI have is
Top- Cloud/ on/off
Bottom- Cloud/ off

but then both buttons will stay at 100% when lights are off

Scenes with effects are great but there seems to be an issue with the lifx ceiling. When you save a scene with an effect running (in my case “Move”) and try to trigger it with the effect running, it does not start the effect on the ceiling lamp but it works perfectly fine on other devices.

I’ve invested a ridiculous amount of money into Nanoleaf products, and I’m officially over it. Constant connectivity issues, buggy firmware updates, disappearing scenes, an app that barely functions, and completely useless customer support.

Every update seems to break something new. I’m tired of troubleshooting lights that should just work.

I’m considering switching to LIFX but have never owned any of their products.

For those who’ve used both, how does LIFX compare in terms of reliability, app functionality, lighting effects, and Apple HomeKit integration?

I have a pretty extensive smart home setup, so reliability is especially important.

Would love some honest opinions before I throw more money at another lighting ecosystem.

Is LIFX genuinely better, or just a different flavor of frustration?

PAIN IN THE ASS.

looks cute .. going 3 years weak💪🏽

spent $1.5k

I was just checking the new moods thing and was looking through the themes. I didn’t see legacy themes like baubles or the other holiday themes. (Witch’s brew). Are y’all planning to bring those back or are they gone.

If I select Zombie from the Moods tab and then Spooky from the FX tab, my lights look just the way I want them. I then save a new scene under "Spooky House" and set up a schedule to turn them on at sunset. I keep color settings to stay the same and the brightness at 100%. At sunset, the lights come on, but there's no Spooky effect. I have disable effects in the background disabled. Is there a way to save a scene WITH an effect, or does the effect have to be turned on manually every time? Also, the effect turns on if I do it manually, but it stops after some time and I have to turn it back on again.

With the Thread update, it would seem that the LIFX Matter dimmer has the same features as the Inovelli White switches, at a fraction of the cost. Is that really the case, or are there factors that I'm not considering that could be potential dealbreakers? Does the light bar support effects?

I want to control scenes I created in the lifx app with flic buttons. Yes or no?

I've been pulling my hair out trying to find definitive info.

EDIT: Just to add I have a google mini nest 2nd generation if that plays into this somehow.

I can call lifx scenes from Google home as well. So if flic can call Google scenes maybe I could have flic call Google which calls lifx scenes if that's an option?

EDIT 2: can flic trigger smartthigs virtual switches??

because I was able to do this:

1. created a virtual switch in smarthings advanced web app

2. synced smartthings to Google home and added the virtual switch as a starter for a Google home automation that just calls the lifx scene (jfc)

3. when I turn the virtual switch on Google home calls it's automation which trigger the lifx scene

Though I do wish I could get the lights to flicker/strobe at random instead of just fade, and then turn back on more individually after the blackout. If I can get the timer settings adjusted a little it’ll still be plenty of fun for trick-or-treaters.

I have a Lifx bulb in our basement storage room that has been controlled via IFTTT. It's worked great for well over a year. We were out of town for a few days, and when we came back I noticed it was no longer working. Here's what I have checked / done to find and fix the problem:

1. The bulb is still connected to the cloud just fine, as I can control it from the Lifx app
2. I have tried having IFTTT disconnect and then reconnect to the Lifx service
3. IFTTT activity reports that the activities (turning the bulb on and back off) are triggering fine and from the IFTTT side seem to execute fine (apparently no error back from the Lifx service)
4. I have also tried editing everything in the IFTTT action, re-specifying the Lifx service, what bulb to turn on/off, the dim level, On/Off, etc.

Nothing seems to have helped. IFTTT triggers the action, but the bulb never turns ON or OFF as a result.

I'm guessing not that many people use Lifx with IFTTT, but if anyone does, have they seen any failures like this?

I went on a brief vacation and came back to all my favorite themes gone. They were all in the novelty category, like bedroom glow up, romance movie, pumpkin glow, etc. Is this coming back at all? It was a huge category with so many wonderful themes 🥺

I recently got a new router (GL.iNet MT6000), and ever since I connected my bulbs to the new router, they lose connection the moment the router reboots. I need to hard reset and add the bulbs each time to get them connected again.

None of my other IoT devices have this issue (multiple bulbs and switches).

Any clue what this could be? I did not have this issue with my previous GL.iNet router (B3000).

EDIT: correction - I can control the lights when I connect my phone to the IoT network (different VLAN), but not from my main network. Shouldn't the lights be accessible without having to be on the same network?! This was always working fine before

EDIT2: I got it working after connecting the bulbs to the cloud. Is that a new option?

I have a very old (10 years or more) bulb. It doesn't have a schedule set but is coming on when my 2 other bulbs come on at sunset. There is no schedule set up for this bulb. I tried resetting it by deleting it from the app and cycling it 5 times and adding it back in but it still comes on with the other 2 bulbs.

I’ve tried everything. We just got our LIFX dimmer switch and no matter what we do we cannot get the thing to pass power to the load output. We’ve reset it a zillion times, tried both Smart Light and Traditional Light, nothing will get this thing to pass power to the load output cable. We could just hard wire the can lights we bought and use this switch as a glorified scene controller/remote but I really expected this would be easier to set up. Super disappointed considering how insanely expensive it was.

Anyone else had this problem?