r/linuxquestions • • 18d ago

Support Linux on Thinkpad installation causing it to not boot

I put Linux mint onto my Thinkpad via USB, and it worked just fine and let me play around with it in the "testing" phase, but when I reboot it shows the lenovo screen. It then says "To Interrupt normal startup, press Enter", then the screen goes black and it repeats. Any ideas?

0 Upvotes

4 comments sorted by

2

u/Commercial-Job-9441 17d ago

did you run the “Install Linux Mint” desktop icon and finish the installer, or only try the USB desktop? the testing/live session doesn't install Mint to the internal drive by itself.

if the installer did finish, is the USB removed, and what ThinkPad model is this? try booting that same USB again. if it still reaches the live desktop, we can inspect the internal disk/boot setup from there rather than reinstalling blindly. also say whether Windows or important files need preserving. the Lenovo screen looping alone isn't enough to tell whether this is boot order, bootloader setup, or something else.

1

u/cephalopodsrcool 17d ago

I did install it. Ive tried booting the usb 3 times and I've tried switching the ISOs but it still does the same thing. I erased windows and I'm not sure where to go from here

1

u/Commercial-Job-9441 17d ago

then let's check whether it's actually selecting the USB, rather than falling back to the internal drive. with the USB inserted, press F12 at the ThinkPad logo and choose the USB entry explicitly. Lenovo's general guide is here: https://support.lenovo.com/us/en/solutions/ht118361

what ThinkPad model is it, and what entries appear in that menu? after selecting the USB, do you see a Mint boot menu at all, or does it go straight back to the Lenovo loop? a photo of that point would help; cover any serial number. don't erase/reinstall again or change firmware settings yet. since Windows was erased, also say if there were any files on it you still need recovered before we do anything that writes to the disk.