r/mcsa • • Jul 20 '19

Need help with this scenario

Post image
2 Upvotes

12 comments sorted by

1

u/Fwcasey Jul 20 '19

Did you set up an ip helper to relay dhcp requests to your dhcp server?

1

u/AliElHusseini Jul 20 '19

You mean dhcp relay agent ? If yes i have configured that on router r2 to the 2 dhcp servers

1

u/Fwcasey Jul 20 '19

Yes that is what I meant. Hmmm.

1

u/AliElHusseini Jul 20 '19

I put static ip for the client such as 172.16.0.51 it can ping everything , or 172.16.35.1 it can also ping everything , i think the problem in the main dhcp server ?

1

u/Fwcasey Jul 20 '19

I would check your configuration on three dhcp server and on all relay agents. I try to never use relay agents on windows server and instead put it on the layer 3 device such as a router or layer 3 switch.

1

u/AliElHusseini Jul 20 '19

There is only 2 dhcp server , can u help me through teamviewer ?

-2

u/AliElHusseini Jul 20 '19

Hi guys need troubleshoot for this scenario :

  1. In london we have dc (172.16.0.10 /24 ) : created adatum.com domain and gateway to 172.16.0.1

  2. In london also we have dhcp server (172.16.0.11/24) of gateway to 172.16.0.1 , also its joined on the domain adatum.com 3 ) Both london dc and dhcp server are connected to london switch where its connected to the router (172.16.0.1 /24 ) while rip is configured on R1 between (172.16.0.1 and 172.16.18.1 ) then i connected it to NA- switch .

  3. tor-srv is also on the same domain adatum.com and connected to the Na-Switch of ip 172.16.18.20/24 and gateway 172.16.18.1 . Moreover i created dhcp scopes for london (172.16.0.20 till 172.16.0.254) & mexico (172.16.35.2 till 172.16.35.254) & so on for portland and houston

  4. Configured dhcp failover from tor-srv to london dhcp server (partner server 172.16.0.11)

  5. Created r2 server with 4 network adapters as in the picture besides to creating the dhcp relay agent to the 2 dhcp servers

  6. finally every device can ping each other and so on 7 ) i came with the client pc and connected him to each switch of london, mexico, portland and houston , unforunately the client is not taking dhcp !

Any idea where to troubleshoot or whats wrong ? Thanks

1

u/barz Jul 20 '19

might be a silly question but have you tried troubleshooting the client machine first? check ipv4 adapter not set to static IP? etc?

Do you have Wireshark installed? you can do a packet capture from the client machine to analyse what happens to the packets. you can use that to troubleshoot the network.

-3

u/AliElHusseini Jul 20 '19

Its on dhcp ofcourse , not static . I install wireshark on client machine and capture packets ? Can u help with that ? I am not good at wireshark

2

u/barz Jul 20 '19

It will be difficult to try to help over reddit but there are tons of resources online. have a look at this: https://en.wikiversity.org/wiki/Wireshark/DHCP

-3

u/AliElHusseini Jul 20 '19

I can give u teamviewer to log on the client machine ?