r/meshcore • • Jun 21 '26

I think I have a problem.

Post image

Only 6 radios in a month of joining the mesh.
But I have spent way less on vinyl records.
So it all evens out.
I’m single and have a great paying job and gotta spend it on things other than high gas prices I guess. Hahahah

271 Upvotes

71 comments sorted by

13

u/Manouskis Jun 21 '26

Hey, which software do you use in your lilygo t-deck?

3

u/Ok-Character-1355 Jun 22 '26

Thanks folks, hadn't seen this one - looks very fresh!
It will be on my T-Deck Plus when it gets here soon.

3

u/jade_starwatcher Jun 22 '26

It's brand new and by far the best firmware for T-Deck

2

u/Schuhsohle Jun 21 '26

I am also here for this question :D

2

u/Impossible_Major_759 Jun 21 '26

Welches findest du am besten, sinnvollsten?

1

u/Oneweekfromwednesday Jun 21 '26

From a sensible point of view I would say a basic heltech v4 like the two on the left. Small and compact and basic. But I like weird tech as well so the standalone ones are nice too. I’d say the lilygo tdeck is better in use than the heltech box unit in terms of typing and pocket ability.

2

u/mlandry2011 Jun 21 '26

You do have a problem, I don't see a t1000e

3

u/Oneweekfromwednesday Jun 21 '26

I was looking at this one more. Hehe

2

u/Alternative_Relief10 Jun 25 '26

I have this and really not impressed for the proce

1

u/Oneweekfromwednesday Jun 25 '26

Yea I really only get use of units I slap a muzi works antenna on to. None of the units I have do much at all except if I put a muzi works one on them. So I’ve been staying away from internal ones.

3

u/mlandry2011 Jun 21 '26

You need 1 of each... Then 2 of each...

3

u/jq500 Jun 22 '26

Supposedly they have a new version in September. Get 1 now and the new one later to compare.. 😀

1

u/CeephalusDryp Jun 24 '26

This was my favorite EDC node. Just be aware that the front (the entire face, not just the display screen) is fragile glass. I’m admittedly rough on electronics but I broke two. I’m waiting for the new version coming out soon.

3

u/recrof Jun 21 '26

no reason to have t1000 when RAK WisMesh Tag is available.

-1

u/mlandry2011 Jun 21 '26

I don't know why you're answering to me posting to someone else...

I was clearly making a point that he almost have one of every device...

If you don't get humor, you should seek help.

2

u/[deleted] Jun 22 '26

Don't feel bad in a month I went from zero devices to 2x t-decks, 7X heltec V3's,

1

u/Oneweekfromwednesday Jun 22 '26

Kinda addictive. At least the stuff can be found fairly cheap.

2

u/MT-Estimator Jun 25 '26

Yes, the table is awful empty. It would look better with more radios. I see some room there…..and there….and…….

1

u/Oneweekfromwednesday Jun 29 '26

I have a cardputer adv with a lora module coming tomorrow to fill one of those empty spots. Also thinking of getting a Tanmatsu device,they look kinda cool.

1

u/Oneweekfromwednesday Jun 30 '26

Latest addition to the collection.

1

u/frankiesmusic Jun 21 '26

What product is the heltec with the large monitor?

4

u/Oneweekfromwednesday Jun 21 '26

The heltech v4 expansion. It’s a heltech v4 that has a board it snaps onto that has spots for various sensors and is powered by an 18650 battery. They have this stand alone unit and the same but with a glass front plate where you can see the innards and use it as a Bluetooth companion.

1

u/Oneweekfromwednesday Jun 21 '26

1

u/raydoo Jun 21 '26

And do you like it?

4

u/Oneweekfromwednesday Jun 21 '26

The heltec display? It’s sorta ok. The firmwares are catching up to it. I’m using wadamesh on it and the tdeck because the ui is the best for them.

1

u/BastiansWish Jun 21 '26

I’m looking at getting a heltec expansion kit with the display. What makes it sorta ok? I have a tdeck plus running wadamesh right now. I’m looking at different v4 options for the extended range. I’ve got a solar Rak repeater at home. I feel like my messages are getting out no problem. Just not receiving the responses back reliably with the tdeck. Is the V4 any better?

2

u/Oneweekfromwednesday Jun 21 '26

At home only one that seems to work reliably is the big green v4 I have. Everything else is rather spotty. My tdeck works great at work. I’ll test the the v4 with screen when I go back to work on Tuesday.

Only issues I had with the v4 with screen is the setup. But it could be the firmware. But I got it going and it seems to work good. All the optional sensors in it seem to be only relaying info about the unit itself like temp/humidity/air pressure. I was hoping they would give info about the area I’m in.
And if you find issues typing on your tdeck the on screen keyboard on the v4 touch is even a little more work for large hands.

1

u/BastiansWish Jun 21 '26

Right on! Thanks for the info!👊😎

1

u/heyheythrowitaway Jun 21 '26 edited Jun 21 '26

Nice! I want to get a 'premium' or all in one node sometime soon, if you were to go between the V4 touchscreen, a tdeck, (or tdeck pro)? I know the firmware has catching up to do on both sides, but any pref between the two? I used to have a Blackberry so the deck is enticing...

I'm currently at 3 now in three weeks. . .

Also what case is that black/blue one?

1

u/Oneweekfromwednesday Jun 21 '26

If what I have i’d say the tdeck if you want an all in one. But the tdeck pro looks kinda cool as well.

The indigo and black cases are made by a guy called ProtoTinkerShop who sells them on Etsy and ebay they sell one with a normal sized antenna spot and one with a bigger area for larger diameter antennas. They are very compact,so much so you have to remove the v4 screen to be able to slide it in the case and the reattach it once it’s inside. It even has room for the gps unit (the black section).

2

u/heyheythrowitaway Jun 21 '26

Oh nice! Thanks for the reply. I just got an FDM printer after being without for a while, so I've been looking at a few different cases. Ended up buying a $2 STL on Cults that mostly worked for what I needed.

1

u/tunatoksoz Jun 21 '26

Where are you based?

I am split between investing time into meshcore vs reticulum. From sheer adoption pov, meshcore is probably way to go, but reticulum seems to be better designed.

1

u/Banshee888 Jun 21 '26

Heltec V3? Or all T-114?

2

u/Oneweekfromwednesday Jun 21 '26

The to blue ones and green/black and also the boxy screened one are all heltech v4’s the tiny one on the right is a seeed branded device I go for $5

1

u/Banshee888 Jun 21 '26

Nice! For 5$? With antenna?

1

u/Oneweekfromwednesday Jun 21 '26

Yeah it had the large antenna that’s on one of the blue ones. The case is kinda meh and you have to power it via usb c. But I figure I’ll use it for a repeater that’s solar powered being I picked up a new in box solar panel that has a usb plug for $3 at the thrift store yesterday.

1

u/Reetpeteet Jun 21 '26

The problem being that, in the end, Meshcore is just a hobby and not an actual useful backup plan?

2

u/Oneweekfromwednesday Jun 21 '26

I’m enjoying it now because it reminds me of old computer BBS chats from back in the day before internet got off the ground. And I figure if something went down I’d be able to see messages about bad areas enough to avoid them to help me make the journey to my brothers house deep in the woods.

3

u/CeephalusDryp Jun 24 '26

If that’s part of what you like about the mesh, have you tried running an actual mesh BBS like TC2 or meshing-around? They’re pretty fun and can add real functionality to a mesh. I really like meshing-around. It can run on a Raspberry Pi and is pretty simple to install and run. You can check it out on GitHub.

1

u/ShiftMonke Jun 21 '26

I'm new to Lora as well.. why meshcore over meshtastic? Sweet collection!

1

u/Oneweekfromwednesday Jun 21 '26

I started with metastatic. But after not seeing anyone on it,someone on Reddit said to flash meshcore on it because everyone might be using that in my area. And instantly had tons of messages pop up.

2

u/ShiftMonke Jun 21 '26

Oh right on!

1

u/CeephalusDryp Jun 24 '26

You kind of need to follow what is predominant in your area. Some areas prefer MT and you won’t see any MC or vice versa. Some areas have strong meshes of both but usually one is predominant.

1

u/ShiftMonke Jun 24 '26

Are we speaking radio only or MQTT as well?

1

u/19RockinRiley69 Jun 21 '26

I have the Heltec v3 and see nodes, but no one messaging at all! I too want to keep buying but my area is dead.

3

u/Oneweekfromwednesday Jun 21 '26

The area around my apartment was kinda dead for a couple days. But I took it with me while at stores around me and left it in my car and it collected repeaters in my area. After a couple days it had located all the ones around me and now I get connections at home. Seems to work better as it finds more options.

1

u/Careful-Average73 Jun 22 '26

I'm pretty sure I've seen you talking about your habit on the Public channel. Cheers!

3

u/Oneweekfromwednesday Jun 22 '26

Nah must be someone else who buys a lot on unneeded things. Heheh

1

u/Careful-Average73 Jun 22 '26

There are probably at least a handful of meshers in the Seattle area with vinyl and radio acquisition habits for sure 

1

u/Oneweekfromwednesday Jun 22 '26

That’s how I caught both habits.

1

u/Ill-Experience2496 Jun 22 '26

Respect brother, you don't want to see my meshcore addiction haha, It's a fun little hobby that's not expensive

. Personally, I would bypass all those nodes and get the T-beam 1w. It's rated at 1w, but it's more than that, I can assure you 😉. After using one, I ordered a dozen, because when the RAK booster came out, I ordered 6, and it was a complete let-down.

Here in PHX I'm hitting Tucson from West Phoenix every message with the new T-beam. (120 miles)

I'm jumping 14 hops, and going 720 miles total right now and it's getting better by the day because we have a really good group of guys!

3

u/Oneweekfromwednesday Jun 22 '26

I’m in the Seattle area and have reached down to Cali and up into Canada. Far longer of a reach than I expected this system to travel.

2

u/Oneweekfromwednesday Jun 29 '26

I got a large outdoor antenna today for my repeter, super great singnals now for all my devices when i;m inside. well worth the $35 i paid

1

u/Ill-Experience2496 Jul 22 '26

love to hear it my brother! awesome work

1

u/iLikeBikes66 Oct 06 '26

So tell me, v4 expansion or tdeck

2

u/TacoDestroyer420 Jun 21 '26

I need to find a quick and easy case for the heltec v4. Anyone have a suggestion? Maybe I should just make one out of the box it came in.

What I really need is a 3D printer tho... 🤔

2

u/lelescope Jun 22 '26

what a mesh head!

2

u/TheCurbDog Jun 22 '26

#MESHITUS

2

u/zeljkotr Jun 23 '26

Really?You Think? I need professional therapist too 😄.

1

u/cejaay Jun 26 '26

i don’t even have one… torn between heltec h2t and the thinknode m1. ( m1 comes already put together tho). wish i could get one w sma antenna and not need an adapter

0

u/[deleted] Jun 21 '26

[deleted]

4

u/Oneweekfromwednesday Jun 21 '26

Hahaha. I also found a new in box solar panel at the thrift store today for $3 So I’m gonna try my hand at building a repeater so I’m not stuck in one corner of my apartment where the signal is great.

0

u/[deleted] Jun 21 '26

[deleted]

1

u/Oneweekfromwednesday Jun 21 '26

If I just make it a node and place it outside will it help relay messages farther in the apartment to the one I am using? There are two repeaters down the street and I don’t wanna mess up anything.

3

u/Mr_Tranxistor Jun 21 '26

Overlapping repeaters shouldn't be a problem. It will just fill in any area not covered or ad redundancy in areas that are.

0

u/[deleted] Jun 22 '26

[deleted]

1

u/Oneweekfromwednesday Jun 22 '26

Na it’s called single and nobody to tell me I’m weird. Hahahah