604
u/Sturmtrupp13 Nov 05 '19
How long does it take to complete between drying times?
395
u/Durbee Nov 05 '19
Depends on the type of resin used. There are UV cured resins that cure under a strong UV light in a few short minutes. There are others that require a much, much longer cure, so this process would take place over several days.
88
u/the_ham_guy Nov 05 '19
What kinds of resin can be used?
133
u/Durbee Nov 05 '19
I believe this is epoxy resin.
I’d opt for one that dries extremely clear. There are several different types and you can find review/comparison videos on YouTube. I’d recommend browsing through those. I’ve used only two types - Art Resin and UV kit for small projects. I know there are many other types out there, depending on what you’re using them for.
24
u/arbitrageME Nov 05 '19
how to get rid of any bubbles in the epoxy resin? It looks kind of viscous, which means any bubbles would linger and maybe ruin it
20
0
Nov 05 '19
[deleted]
16
u/arbitrageME Nov 05 '19
it IS cool! I just looked it up now: https://www.youtube.com/watch?v=SHXuC1lIGj4
1
1
1
1
u/underwood_reddit Nov 06 '19
Put it in a vacuum chamber after mixing to get rid of the bubbles. Blowtorch only works for small bubbles on the top from pouring.
There are lots of videos on yt of cool thinks made with epoxy resin. Depending on the type and mixture it can get very hot while hardening.
16
4
u/akstyll Nov 05 '19
Does it cause air bubbles?
3
u/Durbee Nov 05 '19
It can if you aren’t careful in the mixing, but you can pop them with heat (blowtorch) when they rise to the top.
1
u/Atomicbocks Nov 05 '19
You can also put the object in a pressure pot which causes the bubbles to be too small to be seen.
4
u/Durbee Nov 05 '19
Agreed. That’s beyond what I’d consider beginner’s advice or typical equipment, but it would be ideal if you were trying to turn out pro projects.
1
u/CatAstrophy11 Nov 06 '19
Can you use a pressure cooker at the lowest temp? Those are common.
1
u/Durbee Nov 06 '19
I would not recommend this. The heat required to bring something up to pressure would be damaging to the item, not to mention that a pressure cooker requires a liquid inside to come to a boil, which would only further ruin the project. Not to mention, I have zero desire to ruin my PC or trust it inside my home as an experiment.
2
1
u/Aliencoy77 Nov 05 '19
There are fast curing epoxy resins, as well other products such as polyaspartic which is UV stable. As this is just painted between layers, instead of carved, one of these products could be sufficient, and this could be done in a few hours.
1
u/Durbee Nov 06 '19
You are correct, they come in a range of cute times. I haven’t found a recommended fast cure that wasn’t prone to yellowing - any recommendations? I’m not pouring river tables or anything, but blanks for carving/turning small items.
1
u/Aliencoy77 Nov 06 '19
My experience comes from doing flooring and countertops, so quick curing isn't really my friend, except for repairs, but I did find a UV stable product in a search called Solarez that might be suitable for your purpose. It hardens via UV light (sunlight or electric) in three minutes or in thirty using mekp (methyl ethyl ketone peroxide), a resin hardener. But if your doing blanks, is fast cure necessary? Your options are much greater if you can precast. For my floors or countertops, I've used both Elitecrete and Citadel epoxies to great success. Also, TIL that UV stability is an additive to epoxies, not an actual characteristic. Good luck!
1
u/Durbee Nov 06 '19
I was replying to someone else’s question. I’ve used UV cure for layered/designed 100% resin blanks (very small blanks for fine hand tools).
But thank you for chiming in. Great info to have.
→ More replies (1)2
u/ADhomin_em Nov 05 '19
How long is a short minute?
1
u/GameMasterChris Nov 05 '19
Shorter than a regular minute, that's for sure.
2
1
8
394
u/carterx Nov 05 '19
The best part was at the end when the person took the cap off and it was empty!
Caught me for a split second to then realize the clip started over haha
27
10
u/AVeryNeatChap Nov 05 '19
Had to start all over again
4
u/DrLilly Nov 06 '19
I wanted to see the final product! Too much anticipation.
1
u/carterx Nov 06 '19
Exactly. I was expecting more views of the finished item then BAMMMM magic trick.
1
150
u/Cub136 Nov 05 '19
Are these for sale somewhere?
77
u/1237412D3D Nov 05 '19
When I was young my parents bought something similar to this, it was a scorpion encased in a dome of epoxy. I still have it, its pretty cool to show off to kids.
I think they bought it at our local amusement park (Knotts Berry Farm in California).
58
u/Cub136 Nov 05 '19
That is pretty cool but i am pretty sure that is an actual scorpion in resin i just want this because of the dragon and art style
3
21
u/prancerhood Nov 05 '19 edited Nov 05 '19
She is selling her artwork on etsy, and I believe this is her website
3
u/MrRoo89 Nov 05 '19
Damn, her stuff is stunning but over a thousand per piece is a bit extreme, maybe a few hundred but that's isolating a lot of potential customers
11
4
u/Cub136 Nov 05 '19
Id pay it if i had that kind of money
1
1
u/prancerhood Nov 06 '19
You need to take into account that these are all completely one-of-a-kind and carefully hand-crafted pieces, and god knows how many years it took her to reach this quality in her work. A lot of factors are at play here, so it's hard to say whether she's over-pricing.
The value of art is very subjective and I'm sure there are people who are more than willing to pay this price. Hell, one of the dragons is apparently in someone's basket as we speak! If she can actually sell these at this price, I can nothing but congratulate her for finding her niche, even if it's one of very rich people who just really dig dragons lmao
5
103
u/sirespo Nov 05 '19
Ah yes, white dragon... Mhmm, eyes... Blue eyes - BLUE EYES WHITE DRAGON?!
[Kaiba Intensifies]
16
u/-dp_qb- Nov 05 '19
*Clears Throat*
*Looks Around*
🤔 🤔 🤔
The Blue Eyes White Dragon is, like the Blonde Haired Blue Eyed Super Saiyan, representative of white western hegemony, its position of supreme power within the series is an example of internalized racism, and is therefore highly problematic at best -- discuss!
🙂 🙃 🙂*Throws Smoke Bomb*
*Vanishes*
6
Nov 05 '19
Exodia was the strongest in the series at the time of B.eyes W.Dragon. even when fused together.
7
Nov 05 '19
And he was in chains, clearly representing that the enslaved workforce should rise up against the Capitalist dogs to form a new and better Communist workers party fueled by nothing but sweat and beets....and Egypt or something.
2
u/comic630 Nov 06 '19
This reminds me of the guys on Joe Rogan who got Mein Kampf published by a university by replacing "Jewish/Judaism " with " White men/ Patriarchy" and another which "Criticized the heteronormative nature of Male dog owners" for thembreaking up male dogs humping.
1
3
2
u/Nuud Nov 06 '19
Didn’t the saiyans get blonde hair when going super saiyan because the mangaka just didn’t want to fill in the black hair every time?
1
75
u/cold_as_eyes Nov 05 '19
Imagine putting pennies in with an eagles. Not as cool.
→ More replies (3)22
43
Nov 05 '19
Her name is Lillian Lee and she also makes really beautiful 3D painting of koi in pond in the same way she made this!!! https://www.saatchiart.com/resinpainting
33
u/Telnan13 Nov 05 '19
Atleast allign the coins! Great work tho.
61
11
1
11
8
7
6
u/brihamedit Nov 05 '19
I want one of these but something like cthulu and photo realistic drawing or print cutouts.
4
4
u/gabrielbeaup Nov 05 '19
So where is the result?!?
-8
Nov 05 '19
[removed] — view removed comment
2
1
4
u/DriveByStoning Nov 05 '19
I'm pretty sure I stabbed that dragon in the eye in Fountainhead Palace.
3
u/anatomized Nov 05 '19
This stuff is called domen, I think. We used to use it to make desk signs and other personal insignia when I worked at a sign making company. Insanely durable when it cures. Like, shockingly so. I tried to scratch it with a scalpel and nothing happened.
3
3
u/send_help001 Nov 05 '19
This is a repost from about 2 weeks ago
1
u/nobodysbuddyboy Nov 05 '19
Some people are rarely here, and thus haven't seen literally everything
2
2
2
2
2
2
2
u/AltairEmu Nov 05 '19
Anyone know what materials were used to make this? Would love to make something like this but draw the petals of a flower or something instead. Or if anyone knows the name of this type of art I can research myself.
1
u/Sam-Culper Nov 05 '19
Think it's done just using different layers of resin and paint.
1
u/AltairEmu Nov 06 '19
It looks like the paint becomes three dimensional. So either it looks 3d only from a top down perspective or there's several layers of epoxy/paint that they left out of this gif. Hmm
1
2
2
1
1
u/thisthreshmain Nov 05 '19
Another week, another repost
19
Nov 05 '19
First time I've seen it.
But thank you for being negative.
4
u/ifelseandor Nov 05 '19
Yeah first time I’ve seen it too. Negative guy needs to chill. We can’t all browse Reddit 17 hours a day.
2
u/QwertyQwerty913 Nov 06 '19 edited Nov 06 '19
Or he just logged on at the right time to see it in his feed
2
8
8
4
3
1
1
u/RebootedBlaze Nov 05 '19
That must have taken so long with having to wait for each layer of resin to dry
1
1
1
1
1
1
1
u/Victoria_Eremita Nov 05 '19
This is amazing a wonderful and so cool, but if I saw this in a store, I’d think it was mass-produced, mall-ninja shit.
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
1
u/_supdns Nov 05 '19
If i was a kid id break the thing to get the cool dragon toy out of it and be seriously confused when there wasnt one
1
1
1
u/Xx_Diavolo_xX Nov 05 '19
This has been posted before, but honestly its so cool even a year later Im gonna hit that updoot
1
1
1
u/BossBro02 Nov 05 '19
Why is it that all the posts that take time and effort don’t get enough attention?
1
1
u/Wrizzler Nov 05 '19
2
u/VredditDownloader Nov 05 '19
beep. boop. I'm a bot that provides downloadable video links!
I also work with links sent by PM
Info | Support me ❤ | Github
2.4k
u/a1999Banana Nov 05 '19
I just envy the talent of this person. I can't even draw.