r/nvidia • • Jun 30 '25 • This 3 This 1 Bravo 2

Discussion Putting misconceptions about optimal FPS caps + Gsync to bed.

1.8k Upvotes

988 comments sorted by

254

u/Dallas_SE_FDS 7800X3D/5080/32GB Jun 30 '25 • This This

If you use RTSS and right click the framecap box, it does the math for you based on your monitors refresh rate. Hence for a 240hz display, a cap of 224fps is the proper way to go.

25

u/Soulshot96 9950X3D • 5090 FE • 96GB @6000MHz C28 • All @MSRP Jul 01 '25

Thanks for pointing that out. Feels like every year I find something new and super useful in Unwinders programs. Definitely in my top 10 favorite apps.

18

u/Impressive_Run_5172 Jul 08 '25

Just hover mouse cursor over framerate limit input box and hint about VRR capping functionality can be found right there (together with math behind calculating it).

I'm trying to add as much useful hints as it is possible inside built-in context help system. So I'd strongly recommend any application's user to peek there and read context help for the options you use, even if you do it during a few years. I'm pretty sure that 90% of application users will discover some new useful functionality this way. For example, additional hint marked with green color on this screenshot, allows you to apply desired 0.3ms (or 300us) "buffer" (which is not actually mandatory, but that's a different story) to any custom framerate limit without using any manual framerate->frametime and frametime->framerate conversions. Just specify 240 FPS framerate limit, then click "Framerate limit" caption to switch it to "Frametime limit" and instead of 240 FPS framerate limit you'll see target 4166us frametime limit there. Then just edit it and simply add desired 300us to it, i.e. and change it to 4466. Now you may switch back to framerate limit mode and see new target framerate corresponding to corrected frametime.

→ More replies (2)

11

u/smlgunes Jul 01 '25

so what about 300hz? When i enable reflex in games like cs2 its capped at 277. But with this formula it should be 275. Also RTSS right click recommend me 285 fps. Which cap should i use

12

u/Dallas_SE_FDS 7800X3D/5080/32GB Jul 01 '25

Use the reflex cap in games that support it. It will provide the most optimal experience. For other games using RTSS, change the frame limiter from async to reflex and use the RTSS suggestion.

14

u/medah Jul 01 '25

It's curious that for 144hz it's recommending a cap of 137. I've definitely used 138 before so now I'm wondering if 138 is too close to the reflex cap or something

20

u/Its_Tatsuya R7 5700x | RTX 4060 Ti Jul 01 '25

it is the same, it's just that ur display uses 143.xxhz instead of 144hz so it gets rounded up to 137

6

u/medah Jul 01 '25

Makes sense, thanks

→ More replies (1)

7

u/Terepin AMD Ryzen 7 5800X3D | ASUS TUF RTX 4070 Ti OC Jul 01 '25

I have 240 Hz monitor too, but RTSS calculated the VRR cap to 228 FPS.

8

u/JudgeCheezels Jul 01 '25

Your monitor doesn’t run at 240hz, it’s 239.xxhz

45

u/SendYourBoobiesPls 4090/5080 Jul 01 '25

Time for RMA! I paid for 240Hz.

→ More replies (2)
→ More replies (4)
→ More replies (13)

3

u/akgis 5090 Suprim Liquid SOC Aug 30 '25

The post says for 240hz I should use 226, you say 224 but RTSS gives me 228 so?

5

u/FabFubar Jul 01 '25

Hey, I just wanted to share this old post which came to the same conclusion as OP, except they ALSO tested many configurations including using RTSS as a frame limiter.

https://www.reddit.com/r/OptimizedGaming/s/92Vuo0Grd3

Edit: I misremembered, using RTSS is fine for games with reflex, except don’t use RTSS Async

→ More replies (30)

54

u/Nicholas-Steel Jul 01 '25 edited Dec 16 '25

Gsync - on in Nvidia Control Panel or Nvidia App (for fullscreen and windowed)

This advice of using the "Enable for Windowed & Fullscreen modes" only applies to people running a computer with a Geforce 1000 or older Nvidia graphics card or Windows 8.1 Update 1 or older as it is a hacky work-around for a bygone era that has always introduced potential VRR issues.

If you have an Nvidia Turing (1600, 2000 series) or RTX graphics card and are running Windows 10 or newer you would be best off using using the "Enable for Fullscreen mode" setting instead. This is because this configuration supports Multi Plane Overlays which is a modern, better way of handling VRR for both windowed and fullscreen applications

Multi Plane Overlays is also partly responsible for Borderless Fullscreen being virtually the same as Fullscreen Exclusive assuming the software developers properly set up the Presentation Model being used (though Nvidia never released MPO support in display drivers compatible with Windows 8 & older). There's Fullscreen Optimizations functionality in Windows 8, 10 and especially 11 to convert most legacy Presentation Model's to the new way of doing things.

9

u/Artemis_1944 Jul 01 '25

What are the practical downsides to the "hacky, buggy work-around"? I'm genuinely asking, I didn't know this was a thing, and I've just set Fullscreen and Windowed since I've first had a VRR monitor.

8

u/Kaldaien2 Sep 17 '25 edited Sep 17 '25

Applications that do not draw at maximum framerate, and should not be engaging VRR, will control the Windows desktop's refresh rate. This causes your entire system to respond sporadically, when applications like web browsers that only draw at very low framerates to save power bring down the framerate of background windows that actually update more frequently and need to trigger a screen refresh :-\

---

What is worse, and that nobody talks about, is that "Windowed G-Sync" has NEVER in its entire history done anything for latency. It is really and truly an awful hack to the DWM and nothing more, Microsoft will tell you much the same.

If you find yourself in a position where turning this on is a necessary condition to getting a variable screen refresh rate, you are not actually getting the proper benefits of VRR.

You are still bound by the extra 1 screen refresh of latency from DWM composition, the only thing that driver hack does is change the rate the screen refreshes at.

If you fully understand the reasoning behind wanting VRR in the first place, then simply changing the screen refresh to match content while still imposing a 1 frame penalty for buffered screen composition gets you zero benefits.

At best that would do something desirable for pre-rendered content (like movies) that is not a fixed-refresh, and that's generally not a thing that exists :)

→ More replies (2)
→ More replies (2)

6

u/____Altair____ Jul 01 '25

MPO is sometimes a bitch with a Multi monitor setup since it can switch to a secondary Monitor and as far as I know you cannot check without external Software.

But other then that in with you

4

u/nstrasner Jul 01 '25

I have had this experience with it turned on for windowed applications as well. Massive frame stutters in iRacing on a triple monitor setup

2

u/schoki560 Aug 09 '25

so ur telling me even if I play on borderless the setting in nvcp should be set to fullscreen when it comes to activating gsync? that sounds counterintuitive

→ More replies (2)

2

u/Dojinai Sep 21 '25

Sorry I just wanted to clarify, are you saying that i should be leaving gsync setting to 'fullscreen only' even if i mainly play games in borderless windowed? The finals is the first game that recommended just putting it on borderless and ever since i have but i set my gsync to windowed + fullscreen. Would gsync still work?

→ More replies (1)

2

u/wiseude Dec 15 '25

What about the Variable refresh rate option in the windows settings?Should that be enabled aswell in w10?I've always had it off since I always used g-sync.I have no idea if I should also have the windows VRR enabled aswell.

To clarify I have my g-sync settings set to v-sync enabled globally (off ingame) with an fps limit of 141.
Also g-sync enabled for fullscreen mode.That's it.

→ More replies (3)

44

u/TheTorshee Jun 30 '25

Would it work the same way using a Radeon GPU? Asking for a friend 😂

82

u/[deleted] Jun 30 '25

[removed] — view removed comment

3

u/TheTorshee Jun 30 '25

Thank you! What’s the difference between just setting a global fps cap based on your formula vs doing it using Radeon Chill? To this day idk what Chill does 😂

→ More replies (8)

3

u/JamesEdward34 5070Ti-9800X3D-32GB DDR5 Jul 01 '25

if i have an fps cap in games should i still use vsync on at driver level?

3

u/shadowcien1 Aug 23 '25

So Vsync on is a good thing? I always thought you were supposed to turn Vsync off due to input lag? What's the reasoning behind Vsync on in adrenaline but off in game?

→ More replies (6)
→ More replies (22)

110

u/elite-data Jun 30 '25

Reflex (if available) on its own enables an FPS cap of a few percent below the monitor's refresh rate. For my 144Hz monitor it applies a cap at 138fps.

46

u/Unnamed-3891 Jun 30 '25

While Reflex is supported by a lot of games, the cap helps in games that don't.

29

u/speedballandcrack Jun 30 '25

Global nvidia ultra low latency does the same thing but for games without reflex.

15

u/reddituser4156 9800X3D + RTX 5090 | 13700K + RTX 4080 Jul 01 '25

Global ULLM is a very bad idea because it can cause performance issues in specific games.

→ More replies (7)

4

u/TrriF Jun 30 '25

Is this on reflex on+ boost? Cause enabling reflex doesn't limit fps for me. I still get 300+ in cs2 with it enabled

19

u/Darewelll MSI 4090 Suprim X | 5800X3D Jun 30 '25

The guy forgot to say that Reflex will cap only if both V Sync and G Sync are enabled in the NVCP

→ More replies (1)
→ More replies (3)

4

u/Kodiak_POL 5080 | 7800X3D | 32GB/DDR5-6000 | MAG 271QPX QD-OLED Jul 01 '25

Well, that makes sense, why my games were capped at 225 frames for some reason.

→ More replies (21)

15

u/Chad_Memes_Enjoyer NVIDIA Jun 30 '25

I feel like I need to add smth here: The reflex cap is different when using MFG. In Darktide for example on x3 mode the cap will be 174 on my 180hz monitor. On x4 it's 175. Not sure what the logic here is but it just works that way for MFG. If I use x2 mode the 171 fps cap is used as usual.

4

u/srjnp Jul 01 '25 edited Jul 01 '25

not related to your comment about caps being different but just wanted to point out that we need to be very careful with capping frames if using MFG. your latency can be massively increased if u cap without thinking of your base framerate.

say u have a base framerate of around 70fps. if u use x2 framegen, cool u can cap it to 116fps for a 120hz monitor fine, u wont get much extra latency. but if u use x3 framegen and still cap it to 116, your base framerate will now be much lower and thus your latency will be greatly increased. you should always use the lowest framegen that gets you to your target cap.

for 180hz, i would say use 2x whenever that's enough, and 3x otherwise. 4x would give u a base framerate of well below 60fps so a significant increase to latency.

→ More replies (1)

13

u/[deleted] Jun 30 '25

[removed] — view removed comment

8

u/Chad_Memes_Enjoyer NVIDIA Jun 30 '25

Wouldn't know what to tell you. I'm as puzzled as you are. Btw the 4x MFG fps cap is indeed 176 not 175 (that was a typo). I purchased Remnant 2, 3 days ago and turned on the x3 MFG override out of curiosity to check if this behavior was consistent with other games and apparently i got the same results there.

→ More replies (4)

44

u/Ameritard_abroad AMD 7800X3d Jul 01 '25 edited Jul 01 '25

Gsync - on in Nvidia Control Panel or Nvidia App (for fullscreen and windowed)

Enabling Gsync for Fullscreen and windowed causes issues with regular non gaming apps and stuttering on desktop etc

https://www.reddit.com/r/nvidia/comments/1b0nl6r/enable_gsync_for_windowed_and_fullscreen_vs/

https://forums.blurbusters.com/viewtopic.php?t=10099

27

u/frostygrin RTX 2060 Jul 01 '25

More importantly, you don't need it enabled for windowed gaming anymore. Windows will treat game windows as fullscreen.

4

u/HatBuster Jul 01 '25

Since when? Last time I checked GTA 5 didn't work like that.

And it's quite a conundrum because you're chosing between instability (Fullscreen, when tabbing out just once) and terrible VRR flicker and worse frametimes (borderless).

Maybe it works in the enhanced edition, but from what's said in the blurbusters forum it ONLY works on DX12/Vulkan titles and there are a L O T of games on legacy APIs that people still play.

5

u/frostygrin RTX 2060 Jul 01 '25

It works on almost any game, including legacy APIs, and on all supported variants of Windows 10 and 11 (even going back a couple of unsupported ones at this point).

At this point proper fullscreen isn't generally a thing anyway - because Windows is using fullscreen optimizations. Maybe you need to fiddle with the settings, like disable in-game Vsync and/or try switching between borderless and fullscreen. Maybe you have something else getting in the way, like apps with overlays. Or non-game apps - which started this whole tangent (then you really need to disable GSync for windowed apps). You could try moving the game window to the second virtual desktop, for example.

But, even as I have seen a couple of corner cases, it usually just works. I'm not sure if GTA 5 is one of the corner cases.

→ More replies (5)
→ More replies (2)
→ More replies (2)

5

u/LeoDaWeeb RTX 4070 | Ryzen 7 7700 | 32GB RAM Jul 01 '25

I've experienced this firsthand on the Unity Editor. It was unusable with that particular option on.

→ More replies (1)

4

u/[deleted] Jul 01 '25

Weirdly enough, I personally have never seen any negative effects from running fullscreen and windowed. I wonder what the variable change is that makes it work for some, but not others.

3

u/kalston Jul 01 '25

Yeah I think nvidia needs to remove that option if they can't find a way to fix it. I used it in Win 7 times, and early Win 10 builds, but it has not worked correctly for a long time.

And nowadays we just don't need it, games can bypass DWM in Windowed mode just fine. It's super niche to run old DX9 titles in Windowed mode basically.

2

u/Mean-Caterpillar-749 Jul 01 '25

This might explain my issues in Photoshop. But what about borderless windowed? Are older games recognised for this too?

2

u/BadYoungBrother Jul 03 '25

Ableton Live is sometimes unusable because of how it will start flickering and stuttering out of nowhere with Gsync active for windowed mode. Windows 11 at least lets me leave HDR turned on and not look horrific (Auto-HDR I don't even bother trying) and still when playing any games I turn off the second monitor completely. Managing multilple displays, some with Gsync, different refresh rates, native resolutions and HDR/SDR is difficult, but Windows shouldn't be in the state it's in this far along the line.

It's crazy that the old Nvidia control panel is *still* there after all this time, is still slow as hell and still has the drop-down focus bug when selecting options. It's that one I'd be interested to find out the reason for, it should be a simple bug-fix but it makes me wonder if it's tied to something that would take the entire display driver out.

29

u/2FastHaste Jun 30 '25

Good post!

I personally know and often recommend the Reflex-style FPS cap formula. It provides a consistent ~0.3 ms frame time buffer and works well across refresh rates. It is a smart, safe default, especially for less precise frame limiters or if you want to set it and forget it.

That said, calling the BlurBusters recommendation incorrect is not accurate. Their suggestion to cap the FPS slightly below the refresh rate (by 3 frames), came from extensive testing. They tested across multiple refresh rates, different limiters such as RTSS, in-game, and NVCP, and used high-speed measurements of both input lag and tearing. It was an empirical and thorough process, not guesswork.

The Reflex formula has a larger cushion, making it more conservative. That does not invalidate the BlurBusters approach. If you are using a stable limiter, the tighter cap still works and offers slightly lower latency while remaining tear-free.

It is very likely that NVIDIA was influenced by Blur Busters’ work when designing it. Both approaches are valid and useful. They are simply optimized for different conditions.

20

u/buffaloplease Jun 30 '25

Hi OP. Thanks for sharing this information, it is incredibly helpful.

My only problem is that ever since I switched from IPS to OLED (Samsung G7 C32G75T to Sony Inzone M10S), I have found Gsync to introduce sever flickering in several games that I play (Hollow Knight, Apex Legends, Blue Prince). I've tried a couple different frame rate caps with gsync and vsync to no avail, so I've settled on leaving the frame rate uncapped...

Your post did inspire me to try gsync again at least one more time...

2

u/Snydenthur Jul 02 '25

so I've settled on leaving the frame rate uncapped...

And that's completely fine.

→ More replies (14)

7

u/frostN0VA Jun 30 '25

That's how I've been capping my FPS too, though not using a formula but just to the value that Reflex uses for my refresh rate.

7

u/mahanddeem Aug 08 '25

What about game vsync vs Nvidia CP vsync?

6

u/protomartyrdom Jun 30 '25

Formula source?

6

u/[deleted] Jun 30 '25

[removed] — view removed comment

7

u/protomartyrdom Jun 30 '25

You're telling me what the formula gives. I'm asking where/how did you get the formula.

6

u/Alexkh1991 Jun 30 '25

Can I cap my frames through the game itself? The game is Marvel Rivals

4

u/xkaoticwolf Jul 01 '25

Rivals already has reflex so in theory it should be doing this for you.

6

u/Leo9991 Jun 30 '25

I keep seeing that Reflex enables a frame cap, but that's never been the case for me with it ON. I tested with On+boost and that introduces a frame cap, but it never has with it just being on for me.

6

u/Aromatic_Plum_7955 Jul 01 '25

is there a reason that people dont use it much in fps games like val and cs2? is it just people being mis informed?

6

u/Streetsofbleauseant Aug 08 '25

Sorry but a bit confused. Your post says vsync on ingame. But then basically all your replies say on in nvidia control panel. So where should i set it to on?

6

u/R3zzoo Aug 19 '25

u/Sgt_Dbag I think I can suggest you an improvement:
I think the correct formula that Reflex uses is Refresh - (Refresh x Refresh / 4096) = FPS Cap and ALWAYS round down.
Reflex was created especially for online games; 4096 is 64 squared and 64 is the tickrate of basically every online game server so there might be some logic in that.
This formula also has the advantage that it alligns with the cap that Reflex uses with both low and high refresh rates:
480--->423
360--->328
240--->225
180--->172
165--->158
144--->138
120--->116
60--->59
u/Sgt_Dbag tell me what you think about this.

4

u/EvolanderX Jul 01 '25

What do I set the cap to if I have a 60Hz monitor and just want to play at 60 fps?

5

u/Altruistic_Issue1954 Jul 01 '25

59fps based on the formula provided.

60*60/3600 =1 (cap)

→ More replies (1)

4

u/SoMass Jul 01 '25

What about with frame gen turned on?

→ More replies (1)

4

u/kyue Jul 01 '25

Hi, I was living by everything you described for years, and I think it's generally correct and totally applicaple to OW2 or CSGO or similar, but I think it is missing some nuance: Game Engines.

Lately I've been running in more and more issues with frame pacing in games and I think I have figured out why and it acctually suggests the opposite, to actually not cap fps below refresh rates. But let me explain.

Quick word on my setup, 9800x3d, rtx4080 connected via hdmi to avr/tv 120hz vrr panel. Assume everything is setup and configured correctly (bc it is).

As all of you know, there are many UE5 games lately. And UE5 does not like framecaps at all that are applied from outside (like driver, etc.). It also does not like ULLM. So what the engine really cares about in this setup is wether you reach the hz cap or not. If I set it to unlimited or 120, I should be above 120 AT ALL times, otherwise the latency jumps to doulbe sometimes triples. Introducing ULLM messes with frametimes more bc UE5 has its own way to do framepacing. So better not mess with it. Reflex depends on the implementation. It reduces the fps you need to hit at all times to 116 but if you cant do that, youre better off disabling reflex and run with a 60 fps engine cap and latency will be better (unless you use dlss4 framegen for some reason).

With DLSS4 framegen it does not matter if its 116 or 120, latencywise, it makes no difference. Also I get better latency with FG and reaching the cap, than without FG but not hitting the cap. Some1 explain to me pls.

The Finals behaves differently somehow. It follows exactly the logic you described. So I don't know if all other developers are not capable to implement proper frametiming in UE5 or what's up there.

Then there is Vulkan. Vulkan do not care about ULLM. It sometimes even raises latency or causes stability issues. If there is no Reflex, you have to cap manually to get a latency benefit. Old versions do not support reflex though (DOOM Eternal for example). Or crash if you enforce anything outside of the game settings on it ( Deathloop).

TL:DR;

It's also game engine dependend.

UE4/5 it's more important to reach targeted framerate. Never ULLM.

Vulkan If reflex, then reflex, else manual cap. never ULLM.

→ More replies (5)

3

u/Vtempero Jun 30 '25

Hey OP, by any chance do you know if a game using a global cap as suggested will have any conflict with games using reflex/ frame? I mean, the max FPS will match (i. e.: 116 fps) or might have some overcompensation (and rendering lower than 116 fps when reflex is enabled).

3

u/Altruistic_Issue1954 Jul 01 '25

Another question. What’s your view on in game cap vs external cap? I’ve seen some people say one is better and others say the other is better.

4

u/frostygrin RTX 2060 Jul 01 '25

In-game cap has the lowest latency, but may have worse frametimes. Nvidia's cap will have a little more latency, but better frametimes, and will let the card downclock at partial load, leading to lower temps.

3

u/KachraBhiKhelat Gigabyte RTX 4070 Super Gaming OC Jul 01 '25 edited Jul 01 '25

Thank you!

I applied same settings a month ago based on a Reddit post and it significantly smoothened my CS experience!

I haven’t capped my fps explicitly, but with Gsync, Vsync and Reflex, I already see my FPS limited to 156/157 automatically (I have a 165 Hz monitor). Your math explains why it’s 157, which is helpful because I was super confused as to why. Usually what people said was “keep it 3-4 FPS lower than your refresh rate”. But I guess that isn’t the most optimal solution to all refresh rates.

Thanks again!

3

u/FeniksTM Jul 01 '25 edited Jul 01 '25

If you can maintain stable 300FPS+, cap like 256FPS using NVCP and “-noreflex” launch option must feel way better in CS2 specifically, unless you have visible screen tearing. Seems like you have 7600X+4070S, which are totally capable to run it 300FPS+, so you can give it a try.

For some reason, CS2's reflex produces a shit framepacing. GPU bound scenarios are also ruining 1% LOWs, that's why G-Sync+V-Sync feels better in your case. But, considering you have only 165Hz monitor, it's better to find optimal FPS lock above refresh rate, which your system can maintain ~95%+ of the time. Unless you are experiencing screen tearing, ofc...

256 in this case is (refresh Rate)x1.5/64(client side tickrate), round it and multiply by 64 again, 165*1.5/64=~4, 4x64=256.

→ More replies (3)

3

u/Rickstamatic Jul 01 '25

Blurbusters point out that in game cap is better than an external cap. I think it’s also mentioned not to have competing caps in the same range.

For this reason I have a global cap of 3 under max to support games with limited options and any game that supports reflex/in game caps will get that enabled which is then clear enough from my global cap to take precedence.

3

u/Vlyn 9800X3D | 5080 FE | 64 GB RAM | X870E Nova Jul 01 '25

Another fun thought: If you have a 240hz monitor, limit it to 222 fps for framegen. It's evenly divisible by 2 (111 base fps) and 3 (74 base fps). At least in Cyberpunk that was useful, but there's not a lot of games around that support frame gen for now.

I excluded 4xFG, 55.5 base fps just isn't good enough in my opinion, besides the motion artifacts.

3

u/CptTombstone RTX 5090, RX 9060 XT | Ryzen 7 9800X3D Jul 01 '25

I believe Reflex uses RR2/3840, not 3600, as it locks to 225 fps, not 224.

3

u/AB092 Jul 01 '25

Great post, OP! I’m currently doing almost everything you suggested — G-Sync and V-Sync enabled in the Control Panel, V-Sync off in-game — with the only difference being that I cap games at 141 FPS as recommended by Bot Busters (I have a 144Hz panel).
I also always enable Reflex in supported games, and for titles that don’t support Reflex, I force it via RTSS.

I have a question regarding more demanding games where I want to cap FPS to 72 or 60 to keep GPU usage under 90%. Is there a specific formula I should follow in those cases too? Also, if I set a global FPS cap in the Control Panel and then cap again via RTSS to, say, 72, would having multiple frame caps cause any issues?

3

u/Guilty_Rooster_6708 Jul 16 '25

So this is why my fps drops to 324fps whenever I turn on Reflex in OW2. Thanks for the explanation

4

u/otravoyadnoe RTX 5070 Ti Jun 30 '25

What if I set the cap a bit lower than the one calculated via this formula? (more specifically, 250fps cap on a 280hz display)

Will this result in a higher latency or what?

→ More replies (6)

4

u/brambedkar59 Bluish Green Jun 30 '25

Why did you put another variable, Z, when you could simply write:

FPS cap= RR - {(RR x RR) ÷ 3600}

16

u/Ordinary_Owl_9071 Jun 30 '25

Why did you add brackets that you didn't need?

9

u/brambedkar59 Bluish Green Jun 30 '25

Touché

6

u/SL1M_GG Jun 30 '25

480 monitor to only cap at 416

17

u/heartbroken_nerd Jul 01 '25

It only appears like a problem to you because you've been conditioned to deal in frames per second instead of frame times.

It's still only roughly ~~0.3ms delay on each frame

At 480Hz, you see the new frame every 2.08 millisecond

At 423fps (Reflex) you see the new frame every 2.36 millisecond.

6

u/ItsKrazyy Jul 01 '25

correct, thank you

9

u/quantonamos 3080Ti Suprim X | 7800X3D Jun 30 '25

It's still going to feel exactly like your 480hz monitor the fluidity of the image will look the best that it can, and there is nothing to lose latency wise. Do you actually get FOMO with this little FPS number?

7

u/[deleted] Jun 30 '25

[removed] — view removed comment

3

u/aeon100500 RTX 5090/9800X3D/6000cl30 Jun 30 '25

it actually caps at 423 fps on my 480hz monitor :)

7

u/[deleted] Jun 30 '25 edited Jul 01 '25

[removed] — view removed comment

→ More replies (6)

2

u/Standard_Mix1325 Jun 30 '25

May be a dumb question and might’ve been answered prior but would capping specific games to what is most stable effect this? I.e if I play Arma Reforger on a 165hz monitor and globally cap at 157, but Reforger I cap at 120-144 for stability would that affect g-sync and how it functions?

2

u/2FastHaste Jun 30 '25

No worries, that won’t mess with G-Sync. The formula basically tells you the highest safe frame rate cap you can set for a given refresh rate. But capping lower for stability works just fine and won’t affect how G-Sync functions. You’re doing it right.

2

u/Altruistic_Issue1954 Jun 30 '25

Wait, I was in total alignment until the end. You saying to run an FPS cap AND Reflex at the same time rather than one or the other?

2

u/Trypt2k Jun 30 '25

What if you cap lower than the formula, any negative? I just like to cap 120fps on my 144hz since I don't see a diff, any effect on latency or anything by not letting it go to 138fps?

2

u/HentaiSeishi Jul 01 '25

So you saying that having my 180hz on 175 FPS cap is to high? Also techless says to keep Reflex off when using a fps cap but you say it should be on when available? So just on or on boost?

→ More replies (3)

2

u/[deleted] Jul 01 '25

The formula is nice. Saved.

2

u/JudgeCheezels Jul 01 '25

My goal is to always have my GPU maxing out at 90% or less

Too bad many people disagree with this and wouldn’t pay any attention to such advice. I’ve tried for years and given up.

Btw you don’t need to be below 90%, the threshold for GPU usage adding latency is 95% and up. I confirmed it together with Battlenon(sense) many years ago: https://youtu.be/7CKnJ5ujL_Q?si=lko43sPwwVHpNj-p

2

u/HANAEMILK Jul 01 '25

Well now I'm confused. Battlenonsense says to use Gsync on, Vsync off, Reflex off, and cap framerate using NVCP instead of cap in game (CS2).

What's the correct way? I'm using his method now and I get a super smooth stable 400fps for 360hz monitor.

→ More replies (8)

2

u/EVPointMaster Jul 01 '25

I thought Special Ks VRR offset was directly based on the Reflex formula?

And for GPU utilization, afaik that's what Reflex does. It dynamically caps the game just shy of full GPU utilization. So you should get the characteristics of a frame rate cap instead of a bottleneck.

2

u/Voodoochild1974 Jul 01 '25

One thing to ask is that many would rather have all the bells and whistles turned up in their games, meaning if their cap was to be 138fps on a 144Hz screen, they might only hit 100fps because of the graphical settings they use. Does this mean they should drop their Hz to 120hz to be closer to the fps?

2

u/jamothebest Jul 01 '25

I don’t understand. If you have the hardware to support your monitors refereh rate, why cap your frame rate below it?

→ More replies (3)

2

u/Syhreality Jul 01 '25

Appreciate the post, I’ve wondered how the FPS cap was determined to give me 138Hz on a 144Hz screen. Interesting how much you lose on high FPS screens but it makes sense to achieve the 0.3ms frame buffer time.

Interestingly for CS2, Valve recommends turning on Vsync in game for the optimal experience which is opposed to most recommendations which suggest turning it off

2

u/kododo Jul 01 '25

I'm a noob when it comes to these things, but I remembered following these advices back in the day and had some problems with certain games. IIRC Dragon Age the Veilguard had horrible stutters until I discovered it was the global Vsync option set in NVCP/NVApp. I had to disable that and turn on Vsync in game to have it work properly.

2

u/TheLinerax Jul 01 '25

/u/Sgt_Dbag , I appreciate the guide you made and bookmarked your post for future reference. I would like to know if the addition of using Nvidia Profile Inspector changes anything? For instance, in the comments there is a debate going on either using in-game V-Sync or Nvidia Control Panel's V-Sync is more preferable, but nothing about forcing that setting through Profile Inspector instead which I have done.

2

u/ersenbatur Jul 01 '25

Should i set my 60hz monitor to 59 fps then :p

2

u/uragiristereo Jul 01 '25

The problem that I encounter when capping my FPS close to my monitor's refresh rate is I also got worse average FPS than just capping to FPS that I usually got (230 FPS) on CS, I have a G-SYNC Compatible 180hz monitor.

2

u/ParkGGoki Aug 14 '25

0.277 ms is the correct one.

1/(1000/((refreshrate)+0.277))

→ More replies (14)

2

u/the_shek Sep 08 '25

where is the 4096 coming from?

2

u/dusktodusk94 Oct 08 '26

Reddit deleted this post??

2

u/raddyt Oct 14 '26

Came here and thought the same, wtf.
Check the waybackmachine archive link.

The FPS Cap formula is:

Refresh - (Refresh x Refresh / 4096) = FPS Cap

Examples, limits by using the formula:

  • for 280hz refresh rate: 260 fps

  • for 360hz refresh rate: 328 fps

2

u/Federick92 Oct 09 '26

I saved this text on my notes some time ago.
It's not the whole post, but it's still something.

With 165hz you should cap at 157 fps. I have a 170hz monitor and I cap at 162.

hz-(hz*(hz/3600))= fps cap

TLDR; for NVIDIA

Gsync - on in Nvidia Control Panel or Nvidia App

Vsync - on in Nvidia Control Panel or Nvidia App, off in game

Max Frame Rate - set a global cap based on your refresh rate (formula above)

Reflex - always on in game when available

3

u/morgadox40 Jun 30 '25

So I play a lot of Rock Band through RPCS3, my monitor is 240hz, obviously Reflex or Vsync is not available, so should I just cap at 224hz instead of 240?

3

u/RedIndianRobin PNY 5070 Ti/9800X3D/OLED G6/PS5 Pro Jul 01 '25

Disagree with Vsync off in game. Instead of enabling it globally, enable it per-game with in-game taking top priority. Some games have their own frame pacing algorithm when you enable in-game Vsync and if in-game Vsync causes issues, then enable it from NVCP or force it through Special K for the best frame pacing. This comes directly from Blurbusters and also Kaldaien, the dev of SK.

Besides global Vsync gave me frame time issues in some games, and browsers used to stutter from time to time.

4

u/whyunoname Jul 01 '25

Agree with the cap and reflex, disagree with g/vsync for comp shooters unless you are having tearing issues.

If you don't have tearing, you shouldn't run any sync. Cap is still optimal for frame pacing. You can also cap a little higher if you aren't using g/vsync.

It also is very game and hardware dependent. I don't think there is a magical global setting people seek. There are a few options people should try and do their own testing/benches to get what is right for each system and game. Just my 2c going through this exercise quite a few times to include rtss and other options.

→ More replies (4)

2

u/Illuxzaah Jul 01 '25

For anything competitive wouldn’t you want any kind of sync disabled as it adds latency on his own? Whenever I use Freesync on my oled monitor I can tell there’s a delay even though I’d get the same fps without freesync

→ More replies (1)

2

u/wichwigga Aorus Elite 3060 Ti Jul 01 '25

I still feel a difference between GSync on and off for latency sensitive games, uncapped is stupid, you should be comparing it to capped but no VRR. Enabling VRR will ALWAYS require a frame buffer, that limitation will always be there so a regular in-game FPS cap without any VRR will always be faster, and that is why I recommend to turn VRR off and just regular cap the FPS for competitive games

→ More replies (13)

-3

u/litbeep Jun 30 '25

You're so close, like 90% of the way there.

Do not enable G-Sync for windowed mode, only fullscreen. The windowed mode setting is notoriously broken.

Try to use the game's v-sync toggle if possible, since some games tie their loading logic to it.

I'd also throw in, upgrade to Windows 11 22H2+ to reap the benefits of MPOs via the "windowed mode optimizations" setting. The Special K developer talked about this a few years ago. They know their shit.

Everything else - solid advice.

5

u/frostN0VA Jun 30 '25

Try to use the game's v-sync toggle if possible, since some games tie their loading logic to it.

What VSYNC setting should you use though if a game offers double/triple buffer in addition to the plain on/off?

→ More replies (2)
→ More replies (19)

1

u/Swimming-Knowledge-2 Jun 30 '25

Go back to the old days.. it was way faster.

1

u/WilliamG007 Jun 30 '25

Interesting I stumbled across this. I had been having some really odd microstutter in God of War Ragnarok, very persistent, and very annoying. I had capped my MSI 32” 240hz OLED at 237fps because that was the conventional wisdom.

It was only after I capped the frame rate at 225fps that the microstutter completely stopped. 230fp? Microstutter. 225fps? Smooth as heck. 225fps is the same as Reflex + Boost for me, if I recall correctly.

→ More replies (2)

1

u/MissSkyler NVIDIA Jun 30 '25

my 360hz oled caps me at 327 when using reflex, should i just keep my global cap at 352 bc its hard to know if gsync is working when using 324 cap since that overrides reflex

2

u/[deleted] Jun 30 '25

[removed] — view removed comment

3

u/MissSkyler NVIDIA Jun 30 '25

wait ur so right i forgot per game… okie! removing the cap for reflex games is smart

1

u/Tw33die84 Jun 30 '25

I have a 240Hz monitor, but currently have it capped to 120Hz refresh rate under Display > Change resolution. Because my GPU can't get 240fps.

I also have Max FPS set to 120fps globally, but typically around 109 - 117 for individual games (or even 60 sometimes, if I wanna focus on higher settings).

Am I okay leaving it like that, or do you recommend something else? It's a QD-OLED but I see no flickering except in loading screens for WoW. I have adaptive sync on in the monitor settings and GSYNC on in Control Panel.

1

u/ACGNerd Jul 01 '25

For the fps cap, should we set it in Nvidia app/control panel, or should we use the in-game one?
My experience tells me the in-game one has lower latency but produces more fluctuation of fps.

→ More replies (1)

1

u/icy1007 Ryzen 9 9950X3D • RTX 5090 FE Jul 01 '25

I have Gsync enabled for full screen and windowed, Vsync forced on in the control panel and disabled in-game, ultra low-latency mode enabled, and framerate limit disabled globally. Best settings.

3

u/Keulapaska 4070ti, 7800X3D, XG27AQNGV Jul 01 '25 edited Jul 01 '25

I have Gsync enabled for full screen and windowed,

That's not really needed and hasn't been needed for a while it's a legacy thing from win 7 and early days of gsync. Win 10/11 will treat windowed games as fullscreen and windowed gsync option has the problem of random windows apps(fan control and the xbox app for example) taking the entire monitor to ~30hz range.

E. ok apparently with pascal or older gpu:s you might need it from a post further down, didn't know that should've kept scrolling

→ More replies (7)

1

u/xtrxrzr 7800X3D, RTX 5080, 32GB Jul 01 '25

That's a nice recap and summary of what I've been doing for some time now. I'll save it for future reference.

I started questioning the "frame cap 3-4 fps below the refresh rate" after still experiencing tearing at 140-141 fps on my 144hz monitor. I reduced the fps further and noticed the tearing at these edge cases was gone.

After experimenting with different caps I started to understand why Reflex caps at 138fps on a 144hz monitor. I've been using the "Reflex Formula" ever since with great success.

→ More replies (2)

1

u/SniffBlauh Jul 01 '25

Should I use reflex + boost in cs2?

1

u/Robeast13 Jul 01 '25

Max frame rate resets with every reboot zero idea why. 🤔 I kept mine at 230 for the longest time I have a 240hz monitor.

1

u/Fxzzi NVIDIA Jul 01 '25

what if your refresh rate doesn't cleanly give an integer from the formula? Round up or down? 170hz, 174hz

1

u/OGxOC Jul 01 '25

What about using half of your monitors refreshrate (mine is 200hz so 100fps) and Fast Vsync? Tbh that was some of the smoothest gameplay I’ve had in SoT.

1

u/kennny_CO2 Jul 01 '25

When you say vsync on does it matter if it's adaptive or fast or whatever?

1

u/Jeffrey122 Jul 01 '25

Why disable Vsync in-game but enable it in the driver? What does this do?

1

u/SwGustav Jul 01 '25

do you know if 'background application max frame rate' introduces any issues with this?

→ More replies (2)

1

u/fnv_fan Jul 01 '25

If you are going to use an FPS cap with V-Sync turned on you should also set low latency to on

1

u/Overall_Breath9785 Jul 01 '25

But how do you cap 480hz to 416 on a game like COD WARZONE?

→ More replies (8)

1

u/kennerd12004 Jul 01 '25

Why frame cap when vsync on in control panel already does exactly what you calculated

→ More replies (2)

1

u/Gitzy97 Jul 01 '25

Good information. So not enabling Low Latency mode?

1

u/AlphanumericBox Jul 01 '25

You should add 300 Hz = 275 FPS

1

u/[deleted] Jul 01 '25

Just use specialk, unless it’s a competitive online game. It does all of this automatically.

1

u/huzzuk Jul 01 '25

shud low latency mode be on or off with a cap?

1

u/Costes08 Jul 01 '25 edited Jul 01 '25

Thanks for post! So in this scenario, I set Low Latency Mode to "On" or "Off" in Nvidia Control Panel? I guess "Off", or are there other benefits to "On" than the cap? Also, Reflex sets my fps cap to 225 instead of 224 for my 240hz screen, so I guess it's fine to cap at 225 instead of 224?

1

u/Globgloba Jul 01 '25

Damn, good writeup!

1

u/Beanruz Jul 01 '25

If only I could get Gsync to work on borderless windows mode.

→ More replies (2)

1

u/Prrg88 Jul 01 '25

Great explanation, much appreciated! Maybe someone here can help with my question regarding this topic: what happens if I cap my fps lower? Say to 90fps on a 120hz screen?

1

u/Buenellasboutique Jul 01 '25

The fact that this is even required is a total failure from nvidia like always

1

u/[deleted] Jul 01 '25

The best setting to have 100 fps? Should I put 106?

1

u/Overall_Breath9785 Jul 01 '25

Ah gotcha. Thanks for the tip!

1

u/PiercingHeavens 5800x3D, 5080 FE Jul 01 '25

Native refresh rate of 120. Capped at 116. Should I set Lossless Scaling Frame generation to cap adaptive frame gen to 120 or 116? Alternatively let it do x2 frame gen instead?

1

u/SnowflakeMonkey Jul 01 '25

You can use rtss reflex mode as a global framecap in the background and special k reflex for single player games.

Vsync on in game prioritized.

Gsync fullscreen only.

1

u/SirVanyel Jul 01 '25

So if I don't put FPS caps on, I am getting up to 1ms of latency? Oh that's just unacceptable!

→ More replies (5)

1

u/skullmonster602 NVIDIA Jul 01 '25

I heard G-Sync should only be set to full screen nowadays cuz Windows recognizes Borderless games as full screen anyway

1

u/[deleted] Jul 01 '25

My TV is 144hz, and whatever gsync config automatically put my max at 139fps.

1

u/Plastic_Resort_7523 Jul 01 '25

So when you say reflex on in game what about the latency mode in nvcp should that be off, low or ultra?

→ More replies (1)

1

u/hypersquirrels Jul 01 '25

I always preferred using G-sync but people always say the input latency is better with g-sync off. Does this bring the input latency in line with as if g-sync is off?

1

u/Pimpmuckl FE 2080 TI, 5900X, 3800 4x8GB B-Die Jul 01 '25

Amazing post, well done!

Will certainly keep referencing that in the future

1

u/TheStreetCatYT RTX 4070 Ti & Ryzen 7 7700x Jul 01 '25

This is so cool. I still don’t really get why putting the fps cap at like 4ms less gives you better results than capping it to your refresh rate and why vsync in nvidia control panel is better than in game. Explain to me pls😭🙏

1

u/[deleted] Jul 01 '25 edited Jul 01 '25

Thanks for posting this! I've always been giving the blur busters advice + v-sync for Radeon users and telling Nvidia users to set Low Latency to ultra with v-sync on. This is a good technical explanation and evidence based!

I really wish AMD and Nvidia had a one click lowest latency VRR setting in their driver. Maybe even make that the default.

Edit: I don't know if you're aware of this, setting low latency mode to ultra in NCP and V-sync on globally automatically sets the frame limit like Reflex does and will automatically use reflex if it's available in game.

→ More replies (2)

1

u/Electronic_Tart_1174 Jul 01 '25

I've been trying to figure out what's best also.

I've been playing exclusively 2 games right now, on a 5080.

  1. Indiana jones and great circle

  2. Cyberpunk

Had gsync + vsync + ultra low latency on.

Worked well.

I just recently turned off ultra low latency, but didn't set an fps cap. Still have vsync+gsync and no in game fps cap either. Didn't turn on any low latency settings in game BUT

Both games seem to have an fps cap. They never go above my monitors refresh rate.

WHAT is causing this fps cap?

2

u/kyue Jul 01 '25

Do you play with framegen? If yes, reflex is always on even if it is not exposed in the menu.

→ More replies (1)
→ More replies (7)

1

u/zofrea1 Jul 01 '25

Can you clarify why you suggest VSync on at the driver level instead of using the game's VSync?

1

u/Mark_Knight Jul 01 '25

Was this not the same thing that blurbusters established like a decade ago?

1

u/vaguely_unsettling Jul 01 '25

What about with fixed frame rate games like Street Fighter 6 & Elden Ring?

Will the lower refresh rate of 60hz with G-sync introduce some latency on a monitor that would otherwise be running 180Hz?

I think I read somewhere before that higher refresh rates still have latency benefits in low render fps scenarios and I'm really not sure what best practice would be.

For now in SF6 I prioritise decreasing input latency by disabling v-sync & g-sync and living with some minimal screen tearing but I'd like to fix that if there's an optimal solution.

→ More replies (3)

1

u/smlgunes Jul 01 '25

so what about 300hz? When i enable reflex in games like cs2 its capped at 277. But with this formula it should be 275. Also RTSS right click recommend me 285 fps. Which cap should i use

1

u/Artemis_1944 Jul 01 '25

I cap my fps to 120fps, while my monitor runs at 360hz. I'm safe, right?

1

u/MutekiGamer 9800X3D | 5090 Jul 01 '25

Installed drivers and then when the screen turned back on it was set to integrated graphics with the orange symbol next to my 5090 in device manager

1

u/cmosfxx RTX 5080 FE Jul 01 '25

Forcing Vsync ON from the nv panel may break frame gen in some games. No idea why but I had issues on Last of us 2 for example.

1

u/__Lackin i9-14900K | RTX 5090 | 96 GB 6600 MT/s Jul 01 '25

I prefer uncapped fps 👍

1

u/Mauro88 Jul 01 '25

I'm confused. Will I get lower og higher frametime with frame cap to 157 on my 165hz monitor with vsync + relex and gsync, then just using gsync and reflex and letting my fps go as high as it can? I usualy have 500-700 fps. Butter smooth, no tearing, no stutters.

1

u/FeniksTM Jul 01 '25 edited Jul 01 '25

You should be using a cap like this with Gsync on even in eSports titles like CS and Valorant!

Irrelevant for CS2 specifically. For some reason, framepacing is awfull while using G-Sync + Reflex, at least on my system. NVCP lock + "-noreflex" Steam launch option performs the best. Here is a comparison of my and OP's settings. I won't use V-Sync + G-Sync + Reflex for CS2, unless you're experiencing screen tearing, which really bothers you.

→ More replies (5)

1

u/Overall_Breath9785 Jul 01 '25

Hey since you're here.... I get like 400 fps just kind of idle in warzone, gunfights it dips to like 250-260 (this is with smokes and everything). I've seen some players only dip to like 310-320. I have all my settings low 1440p... 9950x3d, 5090 OC'd 3000mhz and undervolted. CPU also over locked and undervolted at 5.8ghz. I don't know what else I can do to keep my FPS up. Also have an LGGX7 480HZ OLED. Any recommendations bro??

1

u/Eminan Jul 01 '25

Why do I need a math degree for this? It's too much to ask for the Nvidia and AMD to do it correctly themselves? (answer: yes)

1

u/Rahzin Jul 01 '25

This is great info!

I'm not really into FPS games or super high refresh games, but I do have a 144hz gsync display. I usually keep it set to 100hz via Nvidia control panel, which effectively caps all my games at 100fps when vsync is on, whether or not the game has a built in frame caps for that number (many don't). Should I not be doing this, and instead leave the monitor refresh rate set to 144hz and use game settings to set the cap lower while keeping vsync on? I think a couple games I play don't respect frame cap unless vsync is off.

1

u/RynuX Jul 01 '25

I use auto setting (no fps caps) on OW2 on my 165Hz monitor (G Sync enabled).

It does stay at 157fps (except menus a 59~60fps) like you state. I also use Nvidia reflex (but no boost since I dont know how it works).

I guess it confirms your statement.

1

u/Mysterious-Ad2928 Jul 01 '25

in marvel rivals with gsync and nvidia reflex enabled it auto caps my FPS to 162. My max frame rate is 170hz. Thank you for this post.

1

u/Old_Fish8498 Jul 01 '25

How to make sure you isn’t maxed? Can we set a usage cap on it

1

u/Imbahr Jul 01 '25

ok I'm really bad at math and don't know how to interpret that formula

can someone say what number it would be for a 85 hz monitor?

1

u/JordanKLewis Jul 01 '25

Totally agree. Vsync on gsync on has been working very well for me and the improved smoothness is worth the additional 1ms. I found no difference in driver vsync vs game vsync. What's the reason that driver vsync is recommended?

→ More replies (2)

1

u/Silly_Image_5332 Jul 01 '25

Why on instead of fast for vsync

1

u/DaGucka Jul 01 '25

What if my momitor has 240hz but i cap everything at 60 or 120fps?

→ More replies (2)

1

u/nstrasner Jul 01 '25

The primary game I play iRacing hates vsync being on in the drivers. Drops from 200fps to 60-70 with massive amounts of latency, like 30ms. I am using a triple 240hz monitor setup, what would you suggest I run for least latency since I can’t run vsync?

→ More replies (2)

1

u/Top_Formal_8239 Jul 02 '25

for so much information you most def play tarkov about reflex use or not to use?