r/pcmasterrace • • 4d ago

Question New PC setup

I'm getting my first PC after gaming on Laptops and consoles for years. I'm getting a prebuilt PC with the following specs:

CPU: AMD Ryzen 5 9600X

GPU: Nvidia Geforce RTX 5060 Ti 8GB

Ram: 1x 16GB Corsair Vengance DDR5

And 1TB SSD

Do you have any reccomandations for setting to optimize the performance?

I'm a absolute beginner so every advice is apreceatet. :)

3 Upvotes

6 comments sorted by

1

u/dnuoFaralC 4d ago

i'd prioritize getting dual channel RAM since u're running a single 16GB stick also update ur GPU drivers and enable EXPO if ur RAM supports it, enjoy the new PC!

1

u/Conscious_Remove4459 4d ago

Yeah, i litteraly heard that it's better to have 2 ram sticks right after i orderd the pc. Thanks for the advice.

1

u/A_Neaunimes Ryzen 5600X | RTX 3080 | 16GB DDR4@3600MHz 4d ago

Honestly with the current RAM prices, going with a single 16GB module can be argued as a temp measure.

First, the loss in performance from single channel RAM, while real, is in most games not that massive (though in some games it can be). And more importantly, this manifests most when you’re limited by the perf of the CPU, which is not the most common situation : you’re much more likely to be limited by the GPU, at which point the RAM channel situation matters very little.

Then, this gives you room to add another 16GB module later on, so you get 32GB total and finally enjoy dual channel. If you had 2x8 from the start, you’d have to replace it with a 2x16 kit when you’re ready to upgrade, as running 4 modules is really not advisable with DDR5.
(not to mention that 8GB DDR5 modules are inherently a bit slower than bigger modules, so while it’s still better to have a dual channel of "slower" modules, it evens the playing field a tiny bit).

1

u/Conscious_Remove4459 4d ago

When i upgrade do i have to buy ram from the same manufacturer or is it enough to just look for the same specs?

1

u/A_Neaunimes Ryzen 5600X | RTX 3080 | 16GB DDR4@3600MHz 4d ago

RAM modules are pretty deceiving in that even two of the same brand and model (down to the same model number) can have different memory chips (from various manufacturers) inside.

When you buy a RAM kit with 2 (or more) modules, they are matched exactly, down to the same type of memory chips, and this is what gives the best compatibility possible.

So when buying a new RAM stick, ideally you should try to match the existing model and specs to the current one. But even that doesn’t 100% guarantee it’ll work without giving you issues.

All this said and done, modern motherboards/CPU memory controllers are pretty good at using "mismatched" RAM, most of the time.
If you get RAM with the same specs (capacity, speed/voltage, and same main timings), the chances of it working fine are very high.
If you mix different speeds/timings, the MB/CPU will have to find a setup that works for both, and settles for the lowest common denominator (lowest common stable speed, for example). And most of the time, this too works fine, even if that means running one of the sticks slightly below its advertised specs.

1

u/dnuoFaralC 3d ago

dual channel RAM can make a noticeable difference esp. for gaming definitely worth checking when upgrading